The DL-ILFO-H2 HDMI 2.0 Fiber Extender Set 656ftallows you to extend an HDMI signal up to 656' over a multimode fiber (not included), which is significantly longer than the 50' limit on standard HDMI cables. Useful for driving digital signage as well as corporate, boardroom, education, medical facilities, and home theater installations. The HDMI connectors fit extremely snug, and this helps prevent accidental disconnection or signal degradation due to poor contact, enabling the set to support signals up to 4096 x 2160 60fps RGB at 4:4:4.

Transmit HDMI 2.0b video including HDR10 and HDR10+, audio, and CEC (consumer device control) signals as well as HDCP 2.2, for compatibility with the newest monitors over industry standard duplex LC multimode fiber cable. The included power supplies allow you to power both the transmitter and receiver from an AC power outlet and supports worldwide power, although the transmitter can also be powered by the the HDMI source using 5 VDC power.

High-Retention HDMI I/O Connectors    4K Video over Multimode Fiber    HDMI 2.0b, HDCP 2.2, HDR10, HDR10+    Extends HDMI with Audio and Control    Includes Two 5 VDC Power Supplies    Transmitter Powers from Device or USB 5V

• Compact design
• 18G compliant
• DPL certified—tested for true 18G superior optical performance without compression or data loss over 650'
• Extends 4K UHD (4096 x 2160) at 60 Hz (RGB & YCbCr: 4:4:4)
• Male HDMI connectors for direct connection to devices eliminates the need for short HDMI cables
• High-retention HDMI connectors prevent accidental disconnection
• Completely immune to RF and EMI interference
• Supports Static and Dynamic HDR (HDR 10-/12-bit compliant)
• Duplex LC connectors on both transmitter and receiver
• Supports HDMI 2.0b, CEC, HDCP 2.2, and static and dynamic HDR
• Works with industry-standard duplex LC multimode fiber
• International power supplies are included

Related Questions and Answers

Q: 1. It looks like this is powered by 5vdc. Can I power it with USB rather than the power adapter?

A: The DVDO HDMI 2.0 Audio Extractor does not have a USB port with which to intake power, so powering the audio extractor via USB is not possible. We recommend using the included power supply to power the DVDO HDMI 2.0 Audio Extractor.

Q: 2. Someone asked me if they could use 1 port of the splitter for a wireless connection to laptop? I can't imagine that's possible.

A: Yes, you can use the HDMI input of the Kopul HDMI 2.0 5 x 1 Switcher with a laptop/computer that is set to output the supported input formats (listed below). The use case would be for sending a computer's output to multiple monitors. Please note, the signal would be a duplicate of the input signal and would display on up to five (5) target sources. Supported input video formats include: HDMI (4:4:4/4:2:2/4:2:0 RGB, YUV, YCC) DCI 4K at 50/60 fps UHD 4K 50/60 fps 1080p 50/60 fps 1080i 720p 576p 480p 480i / 525 lines 576i / 625 lines

Q: 3. This splitter supports HDR?

A: HDR is in the signal and is not affected by a splitter.

Q: 4. Will this HDMI splitter work with the Blackmagic UltraStudio Mini Recorder?

A: The UltraStudio Mini Recorder can accept signals up to 1080p in 30 fps. However, as this splitter will only output in a 60 fps signal, you may be limited to 720p quality for the Mini Recorder input.

Q: 5. Does the unit come with a power cable or power supply?

A: Yes, the DVDO HDMI 2.0 Audio Extractor comes with a power supply included.

Q: 6. Looking to split the output from a 4k security camera system to 4 TVs thoughtout the house (3' to 75' away). Will this work?

A: Yes it will however you may want to use an extender for your longer cable runs. HDMI cables require boosters or extenders if you intend to run cables longer than 35 feet.

Q: 7. Will this splitter work with apple tv 4k?

A: Our experience is that the Apple TV 4K streaming devices work best and most reliably when connected directly to the television or monitor. The Kopul HDMI 2.0 1 x 2 Splitter (BH # KOHDMISP1220) would not be recommended.

Q: 8. I want to connect samsung flip (UHD signal) to atem mini pro (only accept 1920x1080 and yuv signal), will this hdmi splitter work?

A: NO, this slitter will work with the UHD signal but it can not down-convert the resolution so the signal will remain UHD and will not be accepted by the ATEM mini Pro

Q: 9. Will this splitter work with Atem mini extreme hdmi out put 1 to split to 4 television displays

A: Yes, while we have not tested the Kopul HDMI 2.0 1 x 2 Splitter with the Atem Mini, it should work if you wanted to split the HDMI output. Please make sure to choose the 4 output mode listed below: Kopul HDMI 2.0 1 x 4 Splitter BH #KOHDMISP1420 https://bhpho.to/3ZkX172

Q: 10. Will this also work with a deckling 8k pro?

A: No, System will only run off a Decklink 4K Extreme 12G unit only.