Acebil I-705Gx Tripod With Rmc-3Scp(N) Lanc Controller

Acebil I-705gx Tripod With Rmc-3scp(n) Lanc Controller

Product Code: eq125385
Availability: In Stock

$1,176.00 $1,422.96

Qty

7 reviews Write a review

Description
Reviews (7)

The Acebil i-705GX Tripod with RMC-3SCP(N) LANC Controllerfrom Acebil i-705GX Tripod with RMC-3SCP(N) LANC Controllerincludes a 2-stage aluminum tripod, a standard 705 fluid head, a ground spreader, and an S-11 carry case. Capable of supporting up to 9 lb, the I-705GX provides an optimum solution for small and high-performance camcorders.

You can achieve fixed counterbalance and drag by means of the included 705 standard head. A convenient standard leveling base with 75mm ball diameter is provided, allowing tilt angles of +90° / -60°. Your camera is mounted via a quick release slide plate. You can use the S-11 soft carry case for storing the tripod system.

Aluminum Tripod Legs & 705 Standard Head LANC Zoom Controller Ground Spreader Quick Release Plate, Carry Case Controller for Sony/Canon/Panasonic

Key Specs
Camera Plate	Quick Release
Primary Material	Aluminum
Load Capacity	8.8 lb / 4 kg
Maximum Working Height	Not Specified by Manufacturer
Closed Length	Not Specified by Manufacturer
Camera Attachment
Camera Plate	Quick Release
Head
Base Mount	75 mm Half Ball
Counter Balance	No
Head Dimensions	Base Diameter: 3.0" / 75.00 mm
Pan & Tilt
Vertical Tilt	+90° to -60°
Legs
Primary Material	Aluminum
Leg Sections	2
General
Load Capacity	8.8 lb / 4 kg
Maximum Working Height	Not Specified by Manufacturer
Closed Length	Not Specified by Manufacturer
Bubble Level	No
Packaging Info
Package Weight	13.47 lb
Box Dimensions (LxWxH)	36.5 x 8 x 7.5"

Related Questions and Answers

Q: 1. Does this work with the Panasonic HMC-150?

A: It is designed to work with not only Sony or Canon but Panasonic LANC as well. You are good to go.

Q: 2. Will work with a panasonic ag ux90?

A: Yes. The following unit will adapt to the 2.5 mm Camera Interface Control Input.

Q: 3. Is there an extension cable available for using it on a camera jib?

A: I just cut the cable and fitted a long peace in the middle. A good unit that works well.Andrew Nivison

Q: 4. Will this support controlling a PTZOptics PTZ camera over IP?

A: Yes, the Datavideo RMC-2 Joystick Camera Controller should be able to control other camera brands that use VISCA over IP Protocol. PTZ Optics cameras will support this Protocol. However, we recommend using PTZOptics controllers with PTZOptics cameras because of their level of support if a setup problem does arise. PTZOptics PT-JOY-G4 IP/Serial Joystick Controller (4th Generation) BH #PTJOYG4 or PTZOptics SuperJoy NDI|HX/IP & Serial PTZ Camera Joystick Controller BH #PTSUPERJOYG1

Q: 5. Will this device fully control the Sony PXW-X70?

A: The Acebil RM-S1 remotely controls record on/off, focus, zoom and iris with LANC camcorders. The Sony PXW-X70 is a LANC protocol camcorder so we see no reason it will not work.

Q: 6. Will this controller work with the Blackmagic URSA Mini Pro?

A: The URSA Mini Pro has the LANC protocol so while this combination is unknown and untested by B&H, we see no reason that it will not control the camera's record start/stop, electronic iris, and electronic focus.

Q: 7. Will work with a panasonic AG-CX10?

A: Yes, the Acebil RMC-P3PL Zoom Control Pan Bar can work with the 2.5mm control port on the Panasonic HC-X2000 UHD 4K 3G-SDI/HDMI Pro Camcorder with 24x Zoom.

Q: 8. Is this compatible with the Panasonic UX90?

A: Yes.

Q: 9. Would this work on a Canon 5D Mark IV?

A: This will not work with the 5D Mark IV.

Q: 10. Will this work with the DVX100B?

A: I'm 99% sure it will, notice you will need to connect the the cable on the side of the hand piece (not on the top).

DIY Videography	11/09/2024
[Quick Release] I found a need for this device for several Canon XA-10's I recently ordered. These are AWESOME! Beside very smooth operations it looks very professional. I highly recommend this product. 5

Ht	09/09/2024
[13.47 lb] I use this product with the Sony AX100 camcorder. It has smooth T/W functions. I can adjust speeds with touching on the rocker with light pressure or hard. We use three of these on our cameras. 5

Jack	25/07/2024
[2] Of all the various zoom controllers I've used, this is still my favorite. Not to mention I've had this exact model for over 8 YEARS and it still works great even with all of the play it has developed through countless zooms in and out. 5

Young Professional	17/05/2024
[75 mm Half Ball] I use this with the Canon XA10 and it works great. Gives you a lot of control over your zoom speeds. I'm glad I purchased this. 5

The filmer	12/05/2024
[Aluminum] Great to prop the camera up to shoot games Easy to set up and scans very smoothly like it but it was expensive 5

Bill	11/05/2024
[Aluminum] I use this on a normal height tripod where I dont need an on/off button for the camera. I use others when Ive got the camera on a 20 tripod and need that additional control. Works great. This is my preferred solution in that case. 5