Proaim Double Swivel Clamp For Speed Rails & Scaffold Poles

Product Code: eq125471
Availability: In Stock

$138.00 $201.48

Qty

13 reviews Write a review

Description
Reviews (13)

The Proaim Double Swivel Clamp for Speed Rails & Scaffold Polesgives you a secure and quick connection between scaffolds, truss, speed rails, bars, and rods. It is constructed of high-grade aluminum, which offers a payload of up to 330 lb. The Swivel Clamp is designed to clamp onto 1.5 to 1.96" tubes.

Quickly Clamps Two Speed Rail Pipes 330 lb Load capacity

General
Compatibility	Not Specified by Manufacturer
Physical
Load Capacity	330.7 lb / 150 kg
Material of Construction	Aluminum
Dimensions	Not Specified by Manufacturer
Weight	2.6 lb / 1.2 kg
Packaging Info
Package Weight	3.42 lb
Box Dimensions (LxWxH)	13.2 x 8.3 x 4.3"

Since the clamp freely swivels for 360°, you can adjust your speed rail to any angle you want
Just set your clamp up and tighten the bolt
The locking knob secures the scaffolds in place, ensuring strength with a high level of safety
It is lightweight, durable, and easy to set and remove

Related Questions and Answers

Q: 1. Is this schedule 40?

A: Yes, the Proaim 1 1/4" Speed Rail/Scaffolding Tube (6') is also basic schedule aluminum tubing.

Q: 2. Can I attach this to a monopod, then attach the Wimberley Sidekick to this clamp?

A: You should be able to do that using this clamp.

Q: 3. Is this safe to use on the top of a LCD monitor?

A: We do not recommend connecting this to an LCD.

Q: 4. Will this work with Lume cube 2.0 ?

A: Yep! It’ll connect directly with the Lume Cube’s 1/4” 20 mount!

Q: 5. I am hoping to use this to mount a microphone to a SmallRig cage. Is there a tap for this that is 3/8" on both ends, so that I can screw it into the 3/8" thread holes on the cage?

A: The Rycote Universal Shotgun Mount for Cameras and Boom Poles has a 1/4" female thread on the bottom and the included shoe mount adapter has a 1/4" male thread on one side and a 3/8" female thread of the bottom of the shoe. To attach the shock mount to a 3/8" female thread on your SmallRig cage, you can either use a dual male thread adapter like the Impact 3/8"-16 and 1/4"-20 Adapter Spigot (B&H # IMCA112) with the native thread on the shock mount or you can use the Impact 3/8" to 3/8" Adapter Spigot (B&H # IMCA115) to use the female thread on the shoe mount adapter.

Q: 6. Is this compatible with the Sennheiser MKH 416 ?

A: Yes, the Rycote Universal Shotgun Mount for Cameras and Boom Poles is compatible for use with the Sennheiser MKH 416-P48U3 Moisture-Resistant Shotgun Microphone.

Q: 7. What is the length of the clip itself? I'm looking for something to hold my cms-10 which has a big diameter and a short length for the clip to grab.

A: The microphone cradle apparatus of the Rycote 037340 Universal Shotgun Mount for Cameras and Boom Poles measures 2.5 inches.

Q: 8. How widely can the clamp open? In other words, what's the maximum pole diameter I can attach it to?

A: unfortunately this specific detail has not been provided by the manufacturer

Q: 9. Do you sell a speed rail that this fits nicely on?

A: The Tilta 2" Speed Rail Clamp for Hydra Predator Arm (B&H# TIHDAT05RMA) is part of the Tilta Hydra Predator Shock Absorbing Arm (V-Mount) (B&H# TIHDAT05V) or Tilta Hydra Predator Shock Absorbing Arm (Gold Mount) (B&H# TIHDAT05AB) and it may indeed be used with standard two-inch (50mm) speed rail, just like those arm kits. As of mid May 2022, B&H does not sell speed rail of that diameter, but if and when we do sell Tilta's version of that rail (Tilta HDA-SRK-SR) you will be able to find it at this link: https://bhpho.to/3yIzfrM

Q: 10. It is this correct? 2" speedrail? The standard is 1.25 and 1.5. Why would Tilta go with a non-standard rail size?

A: The Tilta 2" Speed Rail Clamp for Hydra Predator Arm will work with speed rails with an outer diameter up to 2".

Elizabeth	21/09/2024
[3.42 lb] This is easy to get into place and manipulate with one hand while holding it with the other. Some clamps are clunky for me to handle because they are made with beefy guy's hands in mind. I was worried about springing for this, but within 3 hours of getting it, it made itself a favorite. 5

Aaron	29/08/2024
[3.42 lb] The quality looks good. Have not used them other than installing them to check for fit. Have other Global Truss equipment and very happy with it. 5

Brent	24/08/2024
[3.42 lb] I needed these for a Dana Dolley and they are smooth and attach easily. 5

Maureen	24/07/2024
[3.42 lb] We've been looking for a solution for our spotlight that had no stand and B&H had the perfect thing! Solid, easy install, does what it says it will do--and economical. B&H shipped it out to us quickly and--problem solved! 5

Robert	24/07/2024
[Aluminum] These clamps are the best. I use these clamps to hold camera lights, boom arms, and my desktop studio monitors stands in place. Anyone who works in the production field needs these in their gear case. 5

anyonymous	24/07/2024
[Aluminum] Typical high quality Matthews build, this has the unique ability to join two hex snap-in pins while also providing the function of a super clamp. One thing you can do with this is use it with a right-angle super stud to rotate a snap-in pin 90 degrees for clamping to horizontal beams instead of vertical posts. It can of course hold two things too, compared to only one for a super clamp. Hence the name double super clamp. 5

Karl	04/07/2024
[3.42 lb] I have to say these things were a life saver on a shoot I was just on. Not only did they resist high wind speed and keep their shape, but they are light as a feather. Something that will stand the test of time! Good Purchase. 5

Shelton	06/06/2024
[Aluminum] I was looking for something to mount a homemade speaker bar to a speaker tripod. This worked perfectly! 5

Jacob	06/06/2024
[Aluminum] There are a ton of clamp options on the market, including replicas of Cardellinis from other manufacturers. We own a few different makes of jaw style clamps, and while they all work, threading a lock knob down a 4 - 6 shaft with poorly machined threads multiple times a day on set makes you want to throw lesser clamps out of the nearest window. If you work in production full time, save yourself some grief and get the real deal. With respect to this particular product, I love having both spuds on either end of the shaft, and the threads are so well machined all you have to do is pop the lock knob and it spins down the shaft. Super easy to deploy and is entirely invaluable in some circumstances. 5

Matthew	09/05/2024
[Aluminum] I'm not using it for lighting or stage, but rather a ham radio antenna. I bought it specifically to use at the base of a mast pole that I needed to tilt over to where I could reach the top and do some work on it. Using this clamp and a pole pounded in the ground, I was able to tilt the top down without the base sliding away from me. 5