The 3.3' Neewer XLR Male to Female Microphone Cable 3.3' 6-Packis a quality 2-conductor cable engineered for accurate signal transmission and durability. It is ideal for connecting microphones, mixing boards, and other audio equipment in professional studios, home studios, or onstage.

The balanced cable features dual 21-gauge OFC conductors wrapped in an aluminum foil shield and a woven OFC shield to protect your signal from unwanted RF noise. A cotton-yarn inner layer helps reduce electrostatic and microphonic noise. The heavy-duty flexible PVC jacket protects the cable in high-traffic areas.

This pack contains six cables, each with its own color (green, blue, purple, red, yellow, orange) to help identify mics onstage or in signal paths in busy setups.

For Microphones and Studio Equipment    XLR Male to XLR Female Connectors    Green, Blue, Purple, Red, Yellow, Orange    Dual 21-Gauge OFC Conductors    Aluminum Foil Shield + OFC Woven Shield    Heavy-Duty Flexible PVC Jacket

Related Questions and Answers

Q: 1. If I connect the 3.8mm to a Hollyland Lark Max, and the XLRs into an Ursa Mini Pro, will it split the left and right signals?

A: If the Hollyland Lark Max receiver is set to stereo mode, then the ALZO 3.5mm Female to Dual XLR Male Stereo Microphone Adapter Cord will carry left and right signals on the first and second XLR outputs respectively. If it is set to mono mode, the same mixed signal will be carried on both XLR connectors.

Q: 2. Can I connect an RX from the Rode Wireless Go II to a mixer, using the RODE SC11 and 2 RODE VXLRs, so I can have a microphone on each channel?

A: You can use the Rode SC11 Right-Angle 3.5mm TRS Y-Splitter Cable and two Rode VXLR 3.5mm TRS Female to XLR Male Adapters to connect the output from the Rode Wireless GO II Receiver to the inputs on a mixer. As another option, you can use a 3.5mm TRS male to dual XLR male Y-cable like the Cable Techniques 3.5mm Right-Angle TRS to Dual Low-Profile 3-Pin XLR Male Y Cable - 15" B&H # CATGO2YX3M15), the Hosa Technology Pro Stereo Breakout Cable - 3.5mm Stereo Mini to Dual 3-Pin XLR Male - 3' (B&H # HOHMX003Y), or the Azden MX-2 - Y Cable for 200UPR & 320UPR with 1/8" (3.5mm) Mini to Dual XLR Connection (B&H # AZMX2).

Q: 3. Will this work with my stereo clippy mics which end in a 3.5 male trs to be able to use the xlr inputs for my MixPre6?

A: The ALZO 3.5mm Female to Dual XLR Male Stereo Microphone Adapter Cord for Pro Camcorders is compatible with stereo microphones which use a 3.5mm TRS connector.

Q: 4. Can I use this to plug in a Rode Lavalier Go Mic to an Focusrite Audio Interface XLR Jack?

A: The Rode Lavalier Go Mic is not compatible with the RODE VXLR 3.5mm TRS Female to XLR Male Adapter, the correct adapter is the RODE VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter.

Q: 5. Can I use this adapter paired with:(BH #MOG353515) to send audio from a Zoom F4(3.5mm/sub out) to a camera's XLR?

A: You could use the RODE VXLR 3.5mm TRS Female to XLR Male Adapter to connect a 3.5mm line output to a camera's XLR input, although the signal will be mono and it will come in hot due to being a line signal instead of mic level.

Q: 6. Is this the best choice to connect the line out from the Zoom H3-VR to the XLR input of the Zoom F8nPro? Is there a best cable your recommend?

A: Instead of using the Rode VXLR Adapter, you can use a single cable with the appropriate connectors to send the output from the Zoom H3-VR Audio Recorder into the XLR inputs on the Zoom F8n Pro Field Recorder. Use a cable like the Kopul Stereo Right-Angle 1/8" Male Mini-Jack to XLR Male Cable - 6' (B&H # KORSMXM06) for connection to a single input or the Hosa Technology Pro Stereo Breakout Cable - 3.5mm Stereo Mini to Dual 3-Pin XLR Male - 6' (B&H # HOHMX006Y) for connection to dual inputs.

Q: 7. Is this Adapter OK to use with a Rode Video Mic Go Shotgun connecting to a Tascam 70D for phantom power? If it is what should the setting on the Tascam 70D be 24v or 48v?

A: No. You should not send phantom power to the Rode Video Mic. It operates on its own internal battery, which is charged via the USB cable.

Q: 8. Will this work to connect a Sennheiser G4 lav mic to the XLR input of the FX6?

A: The Kopul A-XMMF 3.5mm TRS Female to XLR Male Adapter (B&H# KOAXMMF) could be used to connect the XLR inputs of the Sony FX6 Full-Frame Cinema Camera (Body Only) (B&H# SOFX6) to a 3.5mm male lead coming from a microphone level input such as that coming from the receiver of the Sennheiser EW 112P G4 Camera-Mount Wireless Omni Lavalier Microphone System (A: 516 to 558 MHz) (B&H # SEEW112PG4A) if it is connected with a male to male 3.5mm TRS cable.

Q: 9. Can someone confirm that this cable splits the right channel and the left channel? I'm thinking it might go well with the Deity Microphone V-Mic D4 duo on and ENG type camera such as the Sony FS5.

A: Yes. This cable will split the left and right on the 3.5mm to seperate male XLR conectors.

Q: 10. I have the Tascam DR-60 and two lavalier mics: Boya BY-M1 and Purple Panda. Will the Rode VXLR allow me to connect both microphones to my recorder?

A: If you have an adapter for each mic, I can't see why not. The Tascam has dual XLR inputs.