Digitalfoto Magic Arm With Dual Ball Heads (5.2")

Product Code: eq125666
Availability: In Stock

$72.00 $87.12

Qty

15 reviews Write a review

Description
Reviews (15)

This 5.2" DigitalFoto Magic Arm with Dual Ball Heads (5.2")from DigitalFoto Magic Arm with Dual Ball Heads (5.2")allows you to mount accessories like fill lights or monitors on your rig and freely rotate or adjust them while attached. Both ball heads have a 1/4"-20 screw with locating pins and can tilt 180° or rotate 360°. Other 1/4"-20 mounting threads on the lock knob and 3/8"-16 threads on the ball heads offer additional mounting points for cable clamps or other accessories. Rubber rings on the ball heads maintain smooth movement, and rubber padding on the arm ends protects your equipment from scratches.

180° Ball Heads on Both Ends 5.2" Total Length 1/4"-20 Screws with Locating Pins 1/4"-20 and 3/8-" Threads 360° Rotation Rubber Rings and Padding

Parameters
Top Mount	1/4"-20 Male
Bottom Mount	1/4"-20 Male
Points of Articulation	2
Material of Construction	Aluminum, Rubber
Maximum Length	5.2" / 132 mm
Width	0.1' / 42 mm
Weight	4.3 oz / 121 g

Related Questions and Answers

Q: 1. Does this have standard 25mm ball mounts?

A: The Falcam F22 Dual-Head Quick Release Magic Arm Kit has industry standard ball mounts.

Q: 2. The product looks like and is priced like 'aluminum', but the description says this is 'carbon fiber'. Which is it?

A: Here are the specs from Syrp for the Magic Carpet. Portable and lightweight Adjustable legs with fine adjustment feet Vertical shooting with built-in counterweight wheels Made from durable aluminum Silky smooth ball bearing roller carriage. I will notify our web department.

Q: 3. This ball head looks like it can go easily in landscape position, what about portrait position?

A: Basic answer is that I could discard all my other tripods and keep this one. It's THAT good in any position even with a heavy camera and I use D4s and D3s bodies. Camera position is very fast and simple in every dimension.

Q: 4. What type of supports are people using with this?

A: Light stands

Q: 5. What is the diameter of the pipe?

A: It's metric, 3.1 cm (a bit over 1 3/16 ).

Q: 6. 66Ib=?Ib

A: 66 lbs is the support weight of the DigitalFoto Solution Limited N52 Panoramic Ball Head. So you can put on that head a camera and lens that weighs up to about 66 lbs.

Q: 7. How much weight does it support?

A: The 12” Dual Mega Ball Clamp Arm with 1/4-20 Accessory Mounting, can support around 3-4 Lbs of equipment. However, the weight capacity varies depending on how the unit is positioned.

Q: 8. Can lever clamps from Really Right Stuff be used with this head?

A: Yes, the Novoflex Magic Ball 50 with Socket Head accepts the Really Right Stuff B2-LR-II Lever-Release Clamp (60mm). You will need this bushing adapter to connect one to the other though. https://bit.ly/487EyPx

Q: 9. Will the anti rotating pins work with the Fx6’s top handle 1/4-20 anti rotating holes? (Where the VF screws into)

A: The anti-twist pins of the Tilta Pro Articulating Arm with Dual Ball Heads (1/4"-20 Screws) will fit into the pin holes on the handle of the Sony FX6 Full-Frame Cinema Camera (Body Only).

Q: 10. Does it come with the two camera support platforms/clamps shown in the photo?

A: Yes the Manfrotto 131DDB Tripod Accessory Arm for Four Heads (Black) comes with the two camera supports on top and one on each side as shown in the photos.

Dean	18/09/2024
[2] I bought several of these mounts already, but let me start by stating that I did NOT buy them for their intended purpose (which is for mounting small cameras like a personal handheld or a GoPro to a stationary base, or perhaps even lighter professional cameras)... Instead my use of them (misuse of them) was to attach arrow quivers to the side of high-powered hunting crossbows (I wanted to be able to infinitely customize the position of the quiver assemblies). And for my purpose this mount ALMOST worked beautifully. It easily supports the added weight (more than that of any of my cameras) and it seamed very solid and appeared to hold up to the much greater leverage presented by a 22 inch long arrow package against its tiny 1/4 inch balls (which made for a rather extreme fulcrum point), but field testing revealed that it would slip slightly from recoil-shock when actually shooting (which in my case created a potentially hazardous condition that could get someone hurt). And so in the end I upgraded the bows much larger 1 inch steel and rubber ball motorcycle camera mounts intended to take road vibration and shock of potholes (and this worked perfectly)... Anyhow, that is not what THIS tiny 1/4 inch all-metal mount was ever intended for to begin with. But I can tell you that my misuse presented real-world test conditions which were way-way more extreme than you should ever encounter when using it for its true purpose. So I'd expect it to work out absolutely great as an actual static camera mount. It really is a solid design; very compact, all metal, precision machined parts, even the turn knobs are metal, so you can really torque this thing down very tightly without it failing; there is no plastic in any of the design. It is very clearly well worth the money. And I will definitely still use the 2 I have to set up stationary cameras in the field. In fact, they are so nice that I will likely buy more to use with all of my trail-cams. 5

Quinton	16/09/2024
[1/4"-20 Male ] Very well built magic arm. Wish they have a 3/8 to 1/4-20 because very few things actually have a 1/4-20 mount with locking pins. 5

Dave	06/09/2024
[1/4"-20 Male ] Good luck getting the right size. But when you do, it works great! 5

Alain	28/08/2024
[2] I got a few of these. Really love them. 5

Jordan	27/08/2024
[1/4"-20 Male ] locks tight, and holds my heavy on camera LED easily. 5

Michael	21/07/2024
[1/4"-20 Male ] This little gem holds tight and fits just about anywhere. Super small but really strong. 5

Tarek	04/07/2024
[1/4"-20 Male ] very well built and useful and the price is amazing 5

Brigitte	26/06/2024
[2] I use this with the SmallRig Accessory Mounting Plate for DJI Ronin-S to mount my Ninja V. Works like a charm. 5

Ethan	22/06/2024
[1/4"-20 Male ] The magic arm is pretty easy to use, the whole thing loosens and tightens with a single clamp which is really nice. 5

Robert	21/06/2024
[1/4"-20 Male ] It's always nice to have useful little gadgets like this. SmallRig has proven to be a reliable seller of camera accessories. 5