Lemo-Type 00B 4-Pin To 3.5 Timecode Cable For Tentacle Sync, Easync, Red Epic

Lemo-type 00b 4-pin To 3.5 Timecode Cable For Tentacle Sync, Easync, Red Epic

Product Code: eq125836
Availability: In Stock

$78.00 $106.08

Qty

7 reviews Write a review

Description
Reviews (7)

Deliver timecode to your RED EPIC cinema camera from your Tentacle Sync or Easync device using this LEMO-Type 00B 4-Pin to 3.5 Timecode Cable for Tentacle Sync, Easync, RED EPICfrom DigitalFoto Solution Limited. Plug the NEUTRIK 3.5mm right-angle male connector into your timecode-generating device and input that into your RED EPIC camera with the LEMO-type 00B 4-pin connector. In total, the cable measures 11.8" long.

Delivers Timecode to RED EPIC LEMO-Type 00B 4-Pin Connector NEUTRIK 3.5mm Right-Angle Male Connector 11.8" Total Length

Parameters
Connector 1	1x LEMO 4-Pin
Connector 2	1x 1/8" / 3.5 mm Male Right Angle
Cable Length	11.8" / 30 cm
Packaging Info
Package Weight	0.04 lb
Box Dimensions (LxWxH)	7.25 x 4.65 x 0.45"

Related Questions and Answers

Q: 1. Is there some way to mount this into a rack easily? There seems to be limited mounting options.

A: The Tentacle Sync Timebar Multipurpose Timecode Display could be mounted to a flat rack panel face using soft side hook and loop to attach the unit.

Q: 2. Will there be a smart slate version of this?

A: At this moment, no, Tentacle offers the MovieSlate Pro for iPads though, which would currently be the best option: https://bhpho.to/44amrZ1.

Q: 3. Would this work with a Deity TC-1?

A: Although the Deity TC-1 uses the same TC output type as the Tentacle Sync, the Tentacle C24 Timecode Cable has not been tested with the TC-1 and results may vary.

Q: 4. This cable now works with the a7s3 new firmware update correct? The tentacle website has this listed as dor the a7s3 as well

A: The Tentacle Sync 3.5mm TRS to Multi Interface Timecode Cable for Sony FX3/FX30 (7.9"), BH # TEC24, is compatible with the SONY a7s3 mirrorless camera.

Q: 5. Is there any clamps or mounts? Eg to attach this to a wall?

A: There is an integrated hook surface for mounting the Tentacle Sync Timebar Multipurpose Timecode Display.

Q: 6. What’s the link for the slate option?

A: The Tentacle Sync Timebar Multipurpose Timecode Display is a "timebar," and there is no slate version of this product from Tentacle. A search for "smart slate," will render the results you're looking for.

Q: 7. Would this work with Rode wireless pro?

A: No, the Tentacle Sync C24 3.5mm TRS to Multi Interface Timecode Cable is intended for use with the Sony FX3 and FX30 Digital Cinema Cameras. It is not compatible for use with the RODE Wireless PRO 2-Person Clip-On Wireless Microphone System. For the timecode support in the Wireless PRO, the receiver acts as the timecode generator and timecode is generated together with the audio signal and timecode is baked into the audio recorded by the Wireless PRO transmitters. When the receiver is connected to a camera or recorder, the timecode signal will be recognized by your editing software.

Q: 8. What A series Sony cameras does this work with today (June 2024). A7R 5, I hope?

A: The Tentacle Sync 3.5mm TRS to Multi Interface Timecode Cable for Sony FX3/FX30 (7.9") is only listed as compatible with the FX3 and FX30 cinema cameras.

Q: 9. That Deity TC cable works with tentacle TC box?.

A: Yes, the Deity Microphones C17 Right-Angle Locking 3.5mm TRS to Right-Angle 9-Pin LEMO Timecode Cable would work with the Tentacle Sync E. However, because the Deity cable has a locking connector and the Sync E does not, the locking ring would be loose and my rattle while in use.

Q: 10. Is it compatible with other types of timecode generator? Like the Atomos Ultrasync ONE?

A: The Tentacle Sync Timebar Multipurpose Timecode Display is only compatible via Bluetooth with Tentacle Sync products through the Tentacle Setup App, but you are able to Jam-Sync the device through the 3.5mm jack with other timecode generators such as the Atomos Ultrasync ONE.

Max	26/09/2024
[0.04 lb] I own two of these. Their solid cables so far. I haven't had them for more than a few months but They've held up to some serious abuse that deemed me chewing out a part of the camera department. They are a bit long for anything I need but the slack isn't too much. Both connector sides fit snug in anything I've plugged them in. 5

Kong	21/09/2024
[1x LEMO 4-Pin] Tentacle Sync cables are always great and as the headline says, this is the cable for use with the RED Mysterium X camera. If that's the camera you're dealing with, don't use the cable that says it's for RED, that connector looks the same but is smaller. I'm sure it's for the newer RED camera systems. 5

William	05/09/2024
[0.04 lb] Every product I've ever purchased from Tentacle Sync is of outstanding quality, and this cable is no exception. I still use a Red One, and this is the cable you need to connect a TS timecode generator to the camera's timecode input. 5

Bob	22/08/2024
[0.04 lb] If you need a cable for a Red camera this is the one. There are different Red camera's so make sure you know what pin configuration you need 5

Eric	06/08/2024
[0.04 lb] After testing several different cables, I found this cable - the Tentacle Sync Tentacle to 5-Pin LEMO Cable- is the correct cable to send timecode to the ARRI Alexa 35. 5