Whether you are an owner-operator who needs a case for your camera or a rental house looking to protect its investment, this black Foama Studio Case for RED V-RAPTOR Yellow Insertwith a yellow insert from Foama Studio Case for RED V-RAPTOR Yellow Inserthas you covered. Nestled inside a Nanuk 950 case, the durable EVA foam is custom-cut to accommodate your camera and specific accessories.

The foam insert for the RED V-RAPTOR is custom-made to fit each piece of equipment perfectly, so you can rest assured knowing it's safe from any damage. While most foam inserts on the market are made from open-cell PE or PU foams that are less protective and not as durable, the Foama insert is designed using the highest quality closed-cell EVA foam, which is much stronger and more long-lasting than any other type on the market.

For Camera & Select Accessories    22.8 x 18.3 x 11.7" Exterior Dimensions    IP67 Rated, Dust Resistant & Waterproof    Extendable Handle & Low-Profile Wheels    Lightweight NK-7 Polypropylene Resin    PowerClaw Latching System    Automatic Pressure-Release Valve    Stackable Design, Handle & Lid Stays    Soft Grip Top & Side Handles

• RED V-RAPTOR LPL and PL mount
• RED CFexpress memory cards
• SMALLHD DSMC3 RED TOUCH 7.0" LCD
• RED CFexpress card reader Type B
• Six Anton Bauer Titon Micro 150 batteries
• Charger Blue Shape energy inside
• 18 and 12" rods

This large 22.8 x 18.3 x 11.7" case is outfitted with robust top and side handles for carrying, or if it is too heavy, extend the telescoping handle and tow it behind you on its two rollerblade-style polyurethane wheels. Built from lightweight but tough impact-resistant NK-7 resin, it has a built-in purge valve to ensure you'll be able to easily open the lid after a flight. The O-ring sealed lid makes the case IP67-rated, waterproof, and resistant to dust.

Nanuk's patented PowerClaw latches clamp the case shut, and slide locks prevent accidental opening if dropped. For security, the case has two steel-reinforced 0.34" diameter holes to accommodate padlocks. Other design features include handle and lid stays and durable stainless steel hardware, and the case is designed to be stackable with other cases. These build and design features make the 950 a safe and dependable way to store and transport your gear.

Related Questions and Answers

Q: 1. Is this case large enough to hold two camera bodies (canon 5d mark ii & 7d mark ii) + four lenses (largest is 100-400mm f/4.5-5.6L) + spare batteries, cleaning supplies, etc.? I'm not sure if this case or the 1560 is the way to go.

A: Do this: lay out your kit on a table and arrange within each case's specified dimensions. Within the 15010, plan for padded inserts spanning 1/2 -3/4 separation between each item. If you want more separation, the pick and pluck foam and the 1560 may be a better option.

Q: 2. Can this hold both 120 and 35mm film rolls at the same time?

A: The Kodak Steel 120/135mm Film Case (Red Lid/Yellow Body) can hold both 35mm and 120 film at the same time.

Q: 3. Which cases will hold a mac laptop?

A: This case will hold up to a 15 MacBook Laptop just fine. It would not fit a 17 though.

Q: 4. can I use this to transport a self inflatable life vest on a chopper?

A: This would likely depend on what, if any, restrictions the helicopter had about luggage (available space), and the size of the vest not only before it is inflated, but also after. Other than that, I cannot see any issues with using a pelican case to transport a self inflatable life vest in a helicopter.

Q: 5. Does the case still have the same loud wheels?

A: The Pelican 1510SC Studio Case with Lid Organizer and Yellow Divider Set (Black) come with wheels made of strong polyurethane with stainless steel bearings for smooth traction and works well as any carry-on case with wheels.

Q: 6. Would a Macbook Pro 15.4" fit in the laptop pouch?

A: No, the laptop pouch is limited to 15 inches.

Q: 7. Will it hold a MAC Pro tower?

A: Hi,I do not have the dimensions of the Mac Pro Tower in mind (it should be easy to check and compare with inner dimensions of the case) but at first glance I would say no. This (wonderful) case is cabin-size and I would guess the tower is similar to a PC desktop tower.In any cases I strongly recommend the case to carry fragile / high-tech gear. As a carry-on luggage, be careful with the weight of the basic model as it is quite heavy (there is a recent lighter version).Hope it helps.Marc

Q: 8. Shooting on a boat, let's say I need to swim from an anchored sailboat to shore, not terribly far, would you feel confident floating the case in the saltwater for the swim?

A: I think it is likely that the Pelican folks would agree that this is risky. I have never tried it; maybe it would be ok. However, fully loaded, your case+contents can be very heavy is unlikely to float. Stripped of the bags and with a light load it would float but chuck full ... i doubt it. The seals are pretty robust though. So, if you have maintained the o-rings, etc, it is likely to be dry inside after exposure to water. If you are just transporting a light load, it may float and there is a reasonable chance that this box will protect your equipment. If you are carting several thousand dollars worth of equipment, though, I would not risk attempting to float the package.However, I cannot think of a better container to protect your equipment from damage were the trip to the water to be accidental.You could, of course, put some weights in the box and see how it works. Be sure to expose it to some waves.

Q: 9. ordered and received Pelican 1510, do I order the small organizers? Screws were included.

A: If you are looking to purchase the internal dividers and lid organizer items separately, the Pelican 1515 Padded Divider Set - for Pelican 1510 Series Cases, B&H # PEDS1510, and the Pelican 1519 Photographer's Lid Organizer for Pelican 1510 Case, B&H # PELO1510, would be the correct items for your needs.

Q: 10. Hi anyone use this for a canon c100 standing upright with the top mic handle off ? does it clear well with the pouch ?

A: No, the camera is a touch too tall for that case.