Exalux Connect Rx200N Wireless Rdm/Dmx Receiver Basic Kit

Exalux Connect Rx200n Wireless Rdm/dmx Receiver Basic Kit

Product Code: eq126224
Availability: In Stock

$1,488.00 $2,232.00

Qty

10 reviews Write a review

Description
Reviews (10)

The Exalux CONNECT RX200N Wireless RDM/DMX Receiver Basic Kitfrom Exalux CONNECT RX200N Wireless RDM/DMX Receiver Basic Kitis an ultracompact wireless RDM/DMX receiver. Its RDM and DMX compatibility makes it ready for the future of DMX. CRMX communications by LumenRadio is DMX512 + RDM-ANSI E1.20 compliant, and it supports 512 channels in one universe. The RX200N CRMX receiver works perfectly with the Exalux CONNECT CRMX family, such as the TX100 family. It also works perfectly with other CRMX devices available on the market such as EXALUX CONTROL ONE or CONTROL SKY.

Thanks to its wide supply range (+5 to 26 VDC), the RX200N can be powered through the USB connector of a DMX fixture, a V-lock battery through the D-Tap connector, or any external power supply, available separately.

Built-In LumenRadio CRMX Receiver 1 DMX Universe Wide Range DC Power Mode DMX and RDM Compliant Neutrik 5-Pin XLR Connector Aluminium Unibody Enclosures Removable Antenna Universal 3/8"-16 Mounting

Key Specs
Inputs/Outputs	1x XLR 5-Pin (DMX) Locking Female 1x DC Barrel (Power) Input
Channels	512 (DMX)
Protocol	CRMX, DMX512, RDM
General
Inputs/Outputs	1x XLR 5-Pin (DMX) Locking Female 1x DC Barrel (Power) Input
Channels	512 (DMX)
Cooling System	Passive
Frame Rates	0.8 to 830 Hz
Latency	5 ms
Sensitivity	20 dBm
Wireless Range	328.2 yd / 300 m
Frequency	2.4 GHz
Antenna Gain	20 dBi (External)
Power
Power Consumption	≤0.9 W
Input Power	4 to 26 VDC
PoE Port Power	Yes
Compatibility
Protocol	CRMX, DMX512, RDM
Physical
Operating Conditions	14 to 131°F / -10 to 55°C
Storage Conditions	-4 to 167°F / -20 to 75°C
Certifications	CE, RoHS
Environmental Resistance	Dust-Resistant (IP30)
Material of Construction	Aluminum
Rack Mount	Yes
Dimensions	3.6 x 1.0 x 1.2" / 91.0 x 26.0 x 31.0 mm (Without Antenna) 5.6 x 1.0 x 1.2" / 143.0 x 26.0 x 31.0 mm (Including Antenna)
Weight	2.8 oz / 80 g

Related Questions and Answers

Q: 1. Is TimoLink RX directly compatible with virtual consoles such as Blackout or ARRI stellar app? Or do you have to purchase TX?

A: No, the following system runs of its own protocol system. Freq 2412.99 mhz - 2464.49 mhz

Q: 2. Will this work with the ARRI Skypanl?

A: It's work but the signal very week and not stable at all

Q: 3. Will this work with ARRI Skypanel?

A: The Switchcraft DMX Barrel Adapter 5 Pin Female To 3 Pin Male B&H # SWS5F3M can be used with this receiver onto the Arri Skypanel. Please see the image below for reference.

Q: 4. I have two instruments and I want them to do the exact same thing. Both instruments have DMX IN and DMX OUT jacks. Is it possible to plug a WICICLE receiver into one of the instruments and daisy chain that unit to the other one, instead of buying a separate receiver for each of them?

A: Yes it is possible to connect one light with the receiver and daisy chain to another light using a cable.

Q: 5. Will this work with the Exalux Control One?

A: No, the Exalux system runs on a CRMX, DMX512 protocol system we suggest looking into the following adapter which works with the Exalux system via DMX input and will provide a Lumen Radio CRMX protocol signal. Godox TimoLink TX Wireless DMX Transmitter BH #GOTX • MFR #TIMOLINK TX https://www.bhphotovideo.com/c/product/1748675-REG/godox_tx_wireless_dmx_transmitter.html

Q: 6. Will these work with Chauvet instruments?

A: This can be used on a variety of DMX capable items.

Q: 7. Do the receiver status lights go out eventually or stay on all the time?

A: Once setup and connected, the LED status light will light when sending or receiving data.

Q: 8. Will this receiver communicate with the Exalux Control One?

A: The Blizzard wiCICLE Skywire Wireless DMX Receiver is not compatible with the Exalux CONTROL ONE DMX Controller. The Exalux CONTROL ONE DMX Controller is LumenRadio CRMX. So you need one like this, https://bhpho.to/3Mbq2Ny.

Q: 9. Compatible with Ratpac Satellite?

A: The Godox TimoLink RX Wireless DMX Receiver BH #GORX is a CRMX receiver and should be able to receive signal from any CRMX compatible transmitter.

Q: 10. If I used all three of these with a board like the SDC12 how would channel assignments work? Would they just go 1, 2, 3 automatically or would I need to do something else?

A: You assign a Dmx address for each light and choose channels for each fixture as needed.

William	29/09/2024
[512 (DMX)] Bought four of these to work with a LumenRadio Aurora, connects instantly when Aurora transmits. Simple operation, no issues for me. 5

Nestor	22/09/2024
[0.8 to 830 Hz] Great range and realtime. Awesome. 5

Thomas	09/09/2024
[512 (DMX)] Using in divisible meeting space in crowded 2.4GHz environment and works fine. Very cost effective and simply works. 5

William	11/07/2024
[2.4 GHz] I configured just as instructed in Jeff Brink's YouTube video, works just fine with Blackout, connects without issues to all my receivers. I chose LumenRadio directly (over similar products) as since they own the keys to the castle, coming advances will likely hit their products first. 5

Jonathan	22/06/2024
[0.8 to 830 Hz] Works very well. Way to use 5

Sheila	05/06/2024
[0.8 to 830 Hz] I bought these as we have a series of events happening where the cable runs would have been 300-400' or elements had to be movable. These worked perfectly, with no issues. Have only been used a few times but I would have no issue recommending them thus far. 5

Harry	13/04/2024
[4 to 26 VDC] As expected and came fast? 5

Thomas	04/04/2024
[20 dBm] Haven't had any problems with 4 units. Eliminates DMX cables. 5

Nicholas	30/11/-0001
[0.8 to 830 Hz] B and H are my first go to for any of my photo/ video needs and have been for years. Keep up the great work! Nick 5

Frank	30/11/-0001
[2.4 GHz] The new Stardust from LumenRadio is leaps and bounds better than any other CRMX transmitter on the market. That you can have one unit send out 4 CRMX universes or 8 CRMX2 is a game changer. As a working NYC Film/TV Light Board op, this is essential for my kit. The range on the transmission is excellent. 5