You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Jason Cases Wheeled Case For Motorola Multi-unit Chargers

Jason Cases Wheeled Case For Motorola Multi-unit Chargers
  • Product Code: eq126438
  • Availability: In Stock

$2,697.00 $3,533.07

This Jason Cases Wheeled Case for Motorola Multi-Unit Chargersfrom Jason Cases Wheeled Case for Motorola Multi-Unit Chargershas a custom-cut foam insert to cushion and protect two 6-position Multi-Unit Chargers plus a set of 20 Motorola CP200 batteries during storage and transport. A built-in external waterproof socket enables the chargers to remain inside the case while charging. The foam insert also has slots for accessories and spare batteries. The laser-cut foam supports your gear, and the Pelican 1650 case features a retractable handle and built-in wheels for easy transport.

Genuine Pelican 1650 Case    Laser-Cut High-Grade Foam Insert    Built-In Waterproof Power Socket    Integrated Wheels and Retractable Handle

Key Specs
ColorBlack
Carry/Transport OptionsHandle, Retractable Handle, Wheels (Built-In)
  • Number of Wheels: 4
Type of ClosureLatch
Interior TypePrecut Foam
Water ResistanceWaterproof
IP67
DimensionsExterior
31.59 x 20.47 x 12.45" / 80.24 x 51.99 x 31.62 cm
Interior
28.57 x 17.52 x 10.65" / 72.57 x 44.5 x 27.05 cm
1.81" / 4.6 cm (Lid Depth)
8.84" / 22.45 cm (Base Depth)
Weight24.03 lb / 10.9 kg (Without Foam)
Parameters
Carry/Transport OptionsHandle, Retractable Handle, Wheels (Built-In)
  • Number of Wheels: 4
Type of ClosureLatch
Interior TypePrecut Foam
Features
ATA CompliantYes
Pressure/Purge ValveYes
Security LockAccepts Padlock (Not Included)
General
Water ResistanceWaterproof
IP67
Maximum Buoyancy181 lb / 82.1 kg
CertificationsMIL-C-4150J, DEF STAN 81-41, ATA 300, MIL-STD 810G
Maximum Volume3.08 ft³ / 0.09 m³
Padded InteriorYes
MaterialsExterior: Polypropylene
Interior: Foam
DimensionsExterior
31.59 x 20.47 x 12.45" / 80.24 x 51.99 x 31.62 cm
Interior
28.57 x 17.52 x 10.65" / 72.57 x 44.5 x 27.05 cm
1.81" / 4.6 cm (Lid Depth)
8.84" / 22.45 cm (Base Depth)
Weight24.03 lb / 10.9 kg (Without Foam)

Related Questions and Answers

Q: 1. how do you program the smaller digit on the radio frequency?

A: We can only guess the "smaller digit" you are referring to is the privacy code. Your radio has 121 Privacy Codes available to use in channels 1~22. The selected Privacy Code may be different for each channel. To select a Privacy Code for the current channel press the MENU button twice, and then the up/down buttons to select one of the 38 CTCSS Privacy Codes. Press the MENU button again and then the up/down buttons to select one of the 83 DCS Privacy Codes. The Privacy Code icon on the display will indicate whether you set your Privacy Code in CTCSS or DCS mode. To confirm the selection, press the PTT button or press the MENU button again to move to the next feature setting. Note : If you select a CTCSS Privacy Code, any pre-selected DCS Privacy Code will be cancelled and vice-versa. Selecting a Privacy Code of "oF" will disable the Privacy feature. To communicate between two radios, all radios in your group must be set to the same channel and/or Privacy Code selections. The Privacy Code can only be set in channels 1~22.

Q: 2. What’s the range? For example the Motorola ones I’ve used in the past is 250,000 sq ft

A: The manufacturer claims a 30 mile range, which is unobstructed "on the water", which will very greatly depending on condition, ie, obstructions and RF use in proximity.

Q: 3. Does this radio have an override to talk to all channels simultaneously?

A: No, the Midland FRS License-Free Business Radio Bundle (8-Pack) does not have a multi-channel broadcast mode.

Q: 4. What is the range? For example, the Motorola ones I’ve use in the past are 250,000 sq ft

A: 30-mile range with little obstruction.

Q: 5. Do these take the Motorola style headset inputs?

A: Yes, the Midland FRS License-Free Business Radio Bundle (8-Pack) is compatible with Motorola 2-pin connectors.

Q: 6. can all 8 of these be programmed to the same channel or do they only function in pairs?

A: These radios can all be programmed together.

Q: 7. Likely a dumb question...but does this system allow up to eight people to communicate with each other? Four people? What would be the primary use of this system? What might be a better system for six to eight people in a large room to communicate with each other? Looking for something with a similar style ear-only headset. Thanks.

A: If you are looking for a headset solution for 8 people in 1 large space, B&H # EAHUB817 & BH #HOHLSC18S are our most popular solutions for that.

Q: 8. How good is the reception when using between different buildings? Our office is located at the opposite end of our plant, approximately 200 yards.

A: In this case, we would recommend a high powered radio like the Midland BR200 or MB400 if you are trying to communicate from building to building across 200 yards as the buildings themselves will be an obstruction and make it difficult for the signal from this particular radio to penetrate the multiple walls.

Q: 9. What's the total weight capacity, and weight capacity of each drawers? Thank you

A: I contacted the manufacturer concerning your inquiry. According to the manufacturer, they state that normally, they advise to load each drawer with not more than 20-30 lbs (9.07- 13.61 kg) of tools, and the overall tool chest should not weigh more than approximately 180 lbs. (81.65 kg) when fully loaded.

Q: 10. how do you program the radio??????

A: Larry, these radios are FRS license free radios that are pre-programmed to use the FRS and GMRS shared frequencies. The consumer is unable to make any changes to the programming

18/09/2024

[Precut Foam] Considering my set of Canon CN-E primes is about 4 times the cost of my car, I feel safe with my lenses in this case when I drive my old Honda Civic to a shoot.


I also fly a good bit, and while I would prefer not to check my lenses, if I have to I can be confident that they'll be in good shape when I get to location.

5
15/09/2024

[Black] From what I understand, this case is roughly 1/8th the size of the case that Freefly created, and it seems about the perfect size to me. I've heard you need a fork lift in order to get Freefly's Movi Pro case into the back of a pickup truck, so this one is much more convenient as I can lift it by myself.�It even fits in the trunk of my '05 Hyundai Elantra whenever my wife needs our SUV for the day.�

This is my second Jason Cases case--they're so nice that I find myself looking for reasons to buy another one. It's so nice having something specifically designed for your gear instead of trying to pick-and-pluck your way to something that works.

5
14/09/2024

[Yes] Can be stored without breaking down unit!

5
11/09/2024

[Yes] I just purchased 2 Black Magic URSA Studio cameras and knew the challenge to have one case include cameras, accessories and add extra studio viewfinder was going to be a challenge. Jason Cases was the best choice due to it's well-designed cases, and size. And the extra cutouts allowing for miscellaneous equipment was the icing on the cake!
Well Done!

5
09/09/2024

[Precut Foam] This case is pristine and presents very well.. We are very comfortable traveling our lens knowing it so we'll protected. The foam is a perfect fit. Thank you!

5
05/09/2024

[Yes] The case is very good, I did make adjustments to the padding inside to accommodate at hood, as there isn't a cut out but I made one underneath the monitor. It is large but provides great protection

5
02/09/2024

[Precut Foam] The case is designed perfectly for the Alexa Mini using full Arri Accessories, everything fits in like a glove.

5
24/07/2024

[Precut Foam] Love the case. Fits like a glove. Had to take off a half cage to fit the body but I wanted to ditch the cage anyway. This size will hold 2 lenses and four batteries. Oh, and I bought it on sale too!

5
28/06/2024

[Yes] This case is big and you know that going in. It allows me to keep the FX9 totally built with a Small Rig baseplate and shoulder rig as well as a Gold mount adapter attached. There's a ton of well thought out space for batteries, a charger, cables and other essentials.

5
18/06/2024

[Precut Foam] Beautiful, sexy looking case for my C100 M2. Camera fit snuggly, also have room for two lenses, charger, 4 batteries and more. if you have high end camera than this is a must

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Jason Cases Wheeled Case For 8 Zeiss Cp3 Lenses

$2,397.00 $3,068.16

Jason Cases Wheeled Hard Case For Red Raptor Xl

$1,497.00 $2,245.50

Products You May Like

Print File Cd/dvd Sleeves 250-pack White

$379.35 $489.36

Apollo 52 Cart Motorized Base Upgrade

$32,847.00 $44,014.98

Laowa Argus S35 33mm T1 Cine Lens For Sony E

$2,697.00 $4,234.29

Ewa-marine Lens Step-up Ring 82-95mm

$115.50 $168.63

Cooler Master Caliber X2 Gaming Chair Gray

$1,109.97 $1,387.46

Denz Camera Plate 3.1 X 2.6 Black

$189.00 $266.49

3-pin Xlr Male To Rca Male Cable (6')

$28.77 $42.87