Lynx Technik Fiber Optic Video Receiver Sc Connection

Product Code: eq12651
Availability: In Stock

$2,422.50 $2,931.22

Qty

9 reviews Write a review

Description
Reviews (9)

The Lynx Technik AG yellobrik Analog Sync/Video Fiber Optic Receiver provides two analog outputs and supports single-mode SC fiber connection. This NTSC/PAL composite video to fiber optic receiver is a compact device. It is specifically designed to combat the restrictions involved with the distribution of broadcast-quality analog reference and composite video signals over a long distance. Pairing of this receiver with the OTX 1712 Fiber Optic Transmitter gives a transmission system for analog sync reference signals or NTSC/PAL composite video signals. This device is useful for reference sync distribution between remote installations to maintain correct synchronization.

The ORX 1702 Receiver has the technology to maintain a high degree of sync and burst phase stability during fiber reception and analog conversion. It receives SDI signals (including reference and other relevant information) before they are converted to analog signals. Therefore, when this receiver is used for 525 or 625 SDI video sources, it is possible to convert the signals to an analog NTSC or PAL composite output directly.

Interfaces
Inputs	1x SC (Fiber)
Outputs	2x BNC (3G-SDI)
Standards
Video Standard Compliance	SMPTE 274M/297-2006
Transmission
Video Format	RJ45 1080p: 23.98/24/25 fps 1080PsF: 23.98/24 fps 1080i: 50/59.94/60 fps 720p: 50/59.94/60 fps
Supported Cable Types	Single-Mode Fiber
Fiber Center Wavelength	1260 nm
Power
Power I/O	1x Barrel (8 to 24 VDC) Input
PoE Support	No
Power Consumption	(3.5 W)
General
Operating Conditions	41 to 104°F / 5 to 40°C up to 90% Humidity
Dimensions	5.5 x 1.7 x 0.9" / 140 x 42 x 22 mm
Weight	4.4 oz / 125 g

Supports analog black burst, bi-level, and tri-level sync signals

NTSC and PAL composite video compatible

Supports two outputs

Broadcast-quality performance

Supports hot swapping and hot plugging

Related Questions and Answers

Q: 1. Can you recommend the best solution for Power?

A: The best solution for the Hollyland Mars 4K Wireless Video Transmission System to receive power is using Sony L series NPF batteries, such as (GVMNPF7503PK) which comes with chargers and batteries.

Q: 2. How is this mounted to the camera?

A: The Hollyland Mars 4K Wireless Video Transmission System (B&H# HOMARS4K) consists of the transmitter and receiver, each of which features a 1/4"-20 female thread that may be used with a male 1/4"-20 thread such as this one whose other end can fit into a camera's hot shoe or cold shoe for on-camera mounting: Revo Hot Shoe to 1/4"-20 Male Post Adapter (B&H# RESACS14M, https://bhpho.to/3H278qX).

Q: 3. how many transmitter can you use one hollyland mars 4k receiver?

A: When working with the Hollyland Mars 4K Wireless Video Transmission System you will only be able to use one Transmitter to one receiver. The Mars 4K Transmitter also allows phone app monitoring. Transmitter to 1 receiver + 2 apps Transmitter to 4 apps Mars M1 wireless transceiver monitor to 1 receiver and 2 apps

Q: 4. Does this TX/RX SFP module fits in Black Magic Optical Fiber Mini Converters?

A: That will depend on the model of Blackmagic Converter you are using. So that we may best assist you finding the proper product for your needs feel free to email us directly at askbh@bhphoto.com.

Q: 5. Will this receiver work with the Rhonin 4D's TX2 Video Transmitter module, complete with audio?

A: Only the DJI Ronin 4D Video Transmitter can be used with the DJI High-Bright Remote Monitor.

Q: 6. Can you recommend a stubby antenna for the older Mars 400?

A: There are two shorter antenna options. However, Nothing as short as the Mars 4k that would work with the older models. option one https://bhpho.to/3H9cth1 Option two https://bhpho.to/3imFlYK More info about the Antenna options - The Triumph Mushroom and Lollipop antennas are the same with different design. Cylindrical is the regular antenna you use for most of the cases when the Transmitter and Receiver are at the same height or horizontal. The Triumph Mushroom, and Lollipop antennas are used when the Transmitter and Receiver in big height difference, for example, you put the transmitter on top of the jib while the receiver is mounted with the monitor on the ground.

Q: 7. If I send a 10 bit image it will be converted to 8 bit?

A: Yes, as Hollyland has stated, a 10-bit video signal sent to the Hollyland Mars 4K Wireless Video Transmission System, will be converted to 8-bit.

Q: 8. Is there a pre-made XLR audio break-in/out cable assembly available from Lynx Technik (or someone else) that could be used with the 25 pin connector on this unit?

A: According to the manufacturer, that while the included D-Sub Screw Terminal Adapter PCB answers the needs of 99% of it's users, there is a special order item. that might suit you RAC MF25-4/4 Adapter Cable. http://bit.ly/1eg8tKW If you wish to order this, please email us. provideo@a href= http://bhphotovideo.com target= _blank bhphotovideo.com./a

Q: 9. Can the receiver see the transmission from a drone?

A: No, not directly. However, if your drone is large enough to hold a transmitter, and the drone has HDMI/SDI output it could work. Using the DJI Transmission Standard kit. DJI Transmission Standard TX/RX Combo BH #DJTSC

Q: 10. Does it have its own remote controller ?

A: It does not come with a remote controller. You can get the Cinetics Lynx Controller as a separate item. https://tinyurl.com/3hs3kbr8

Jose	13/09/2024
[1x SC (Fiber)] I had to drill large holes in the very center of the plate to allow for easy in/out of the short end of the cable. After that these reels worked great. Totally worth the price and the headache relief of under/over cable wrapping until your arms fall off. I started with 1 and bought 5 more recently. 5

Steve	29/07/2024
[ (3.5 W)] I wrapped a 250ft Outdoor POE CAT6 Network Cable on this reel and it really works well. Not the most durable reel I have ever used but for a network cable it's just what I needed. 5

Bryan L.	27/07/2024
[1260 nm] Works as expected 5

Tim	21/07/2024
[1x SC (Fiber)] Just note that this are single channels per box. So you essentially used the SDI output as an additional out which is nice and saves us a DA. Took a chance on an unknown player and happy to say they worked. These are the same guys that own lilliput (shared a booth at NAB at least) 5

Stephen	15/07/2024
[1x SC (Fiber)] Lower cost than most cable reels, good quality. I am using this for a CAT5e digital audio snake. A side reel for the tails would be a big plus. 5

Jim Speed	01/06/2024
[1x SC (Fiber)] The distance from our ISP to the cabinet that houses the data switch is about 18 meters. I can always find the length and type of fiber optic cable I need and, I receive it quickly, and the price is competitive. 5

ICDave	21/05/2024
[2x BNC (3G-SDI)] Plugged it in and it worked with no adjustments or configuration necessary. Long connection with fiber looks exactly like short connection with DVI cable. I'm running a 1920 x 1200 monitor at 60 Hz. 5