The Lynx Technik AG yellobrik Analog Sync/Video Fiber Optic Transmitter provides a passive loop output and supports single mode LC fiber connection. This compact analog sync or NTSC/PAL composite video to fiber optic transmitter is specifically designed to combat the restrictions involved with the distribution of broadcast-quality analog reference and composite video signals over a long distance.

Pairing of this transmitter with the ORX 1702 Fiber Optic Receiver (sold separately) gives a transmission system for analog sync reference signals or NTSC/PAL composite video signals. This device is useful for reference sync distribution between remote installations to maintain correct synchronization.

The OTX 1712 Transmitter has the technology to maintain a very-high degree of sync and burst phase stability during fiber reception and analog conversion. It converts NTSC/PAL video signals to SDI signals (including reference and other relevant information) before they are converted into fiber optic signals. Therefore, when the OTX 1712 Transmitter is used for NTSC or PAL video sources, it is possible to convert the fiber signals directly into SDI if required using an SDI receiver (such as ORX 1712).

Analog Sync Signal to Fiber    NTSC & PAL Composite Video to Fiber    Up to 6.2 Mile Transmission    Error-Free/Broadcast-Quality Performance    Passive Loop Output    For Black Burst, Bi- or Tri-Level Sync    Hot-Swapping & Hot-Plugging Support    yelloGUI-Compatible for Settings Access

• Supports analog black burst, bi-level, tri-level sync signals
• Supports up to 1080p60 video

Related Questions and Answers

Q: 1. Do these devices need a battery pack to function?

A: The Hollyland Mars 4K Wireless Video Transmission System comes with two wall power adapters included to power both the TX and RX. However, you will need to add batteries if you cannot be wired to wall power, like these: Genaray 2 x NP-F770 4400mAh Batteries & 2 x Compact Chargers Kit (B&H # GENPF770CS)

Q: 2. Does it have its own remote controller ?

A: It does not come with a remote controller. You can get the Cinetics Lynx Controller as a separate item. https://tinyurl.com/3hs3kbr8

Q: 3. Are the SFP modules included?

A: Yes, An SFP module with LC connector included with the Transmitter and the Receiver in the AVMATRIX 3G-SDI Fiber Optic Extender Transmitter & Receiver Set.

Q: 4. Is the I/O breakout cable included?

A: No, An AES breakout cable is not included. Example AES cable Hosa Technology AES/EBU Snake - DB25 Connector to 4x XLR3M and 4x XLR3F - 9.8' (3m) BH #HOAEDST4XMF

Q: 5. Will this transmitter attach to the Ronin 4D?

A: At this time, for the DJI Ronin 4D 4-Axis Cinema Camera 6K we recommend using the DJI Ronin 4D TX2 Video Transmitter BH #DJVTR4D • MFR #CP.RN.00000178.01 which is designed for the 4D.

Q: 6. Hello. Please tell me are LC SFP modules included in Lynx Technik AG OTT 1812 BH #LYOTT1812?

A: Yes, An SFP is included with the Lynx Technik AG Dual-Channel 3Gbit SDI to Fiber Transmitter. Includes Module, SFP Module, AC power supply

Q: 7. Is this zero latency?

A: DJI transmission technology enables the system to offer a 20,000-foot (6km) on-ground transmission distance (FCC) with end-to-end ultra-low latency (down to 68ms).

Q: 8. When using this transmitter, will it also drive the active track view on the RS3 Pro?

A: No, the DJI Wireless Video Transmitter does not provide the active track. The DJI Ronin RavenEye Image Transmission System for RS 2 & RSC 2 provides that capability with the DJI RS 3 Pro Gimbal Stabilizer. The DJI Ronin RavenEye Image Transmission System for RS 2 & RSC 2 is included with the DJI RS 3 Pro Gimbal Stabilizer Combo. See the link below: https://bhpho.to/3PTZcdE

Q: 9. Is there a pre-made XLR audio break-in/out cable assembly available from Lynx Technik (or someone else) that could be used with the 25 pin connector on this unit?

A: According to the manufacturer, that while the included D-Sub Screw Terminal Adapter PCB answers the needs of 99% of it's users, there is a special order item. that might suit you RAC MF25-4/4 Adapter Cable. http://bit.ly/1eg8tKW If you wish to order this, please email us. provideo@a href= http://bhphotovideo.com target= _blank bhphotovideo.com./a

Q: 10. DJI is panning to sell just receivers with no monitor like teradek?

A: As of right now, there is no news on a stand alone wireless receiver from DJI.