Lynx Technik Yellobrik Video Fiber Optic Transmitter

Product Code: eq12656
Availability: In Stock

$2,479.50 $3,421.71

Qty

6 reviews Write a review

Description
Reviews (6)

The Lynx Technik AG yellobrik Analog Sync/Video Fiber Optic Transmitter provides a passive loop output and supports single mode ST fiber connection. This compact analog sync or NTSC/PAL composite video to fiber optic transmitter is specifically designed to combat the restrictions involved with the distribution of broadcast-quality analog reference and composite video signals over a long distance.

Pairing of this transmitter with the ORX 1702 Fiber Optic Receiver (sold separately) gives a transmission system for analog sync reference signals or NTSC/PAL composite video signals. This device is useful for reference sync distribution between remote installations to maintain correct synchronization.

The OTX 1712 Transmitter has the technology to maintain a very-high degree of sync and burst phase stability during fiber reception and analog conversion. It converts NTSC/PAL video signals to SDI signals (including reference and other relevant information) before they are converted into fiber optic signals. Therefore, when the OTX 1712 Transmitter is used for NTSC or PAL video sources, it is possible to convert the fiber signals directly into SDI if required using an SDI receiver (such as ORX 1712).

Analog Sync Signal to Fiber NTSC & PAL Composite Video to Fiber Up to 6.2 Mile Transmission Error-Free/Broadcast-Quality Performance Passive Loop Output For Black Burst, Bi- or Tri-Level Sync Hot-Swapping & Hot-Plugging Support yelloGUI-Compatible for Settings Access

Interfaces
Inputs	1x BNC (Composite / Sync) Female
Outputs	1x ST 1x BNC
Standards
Video Standard Compliance	SMPTE 274M/296M/297-2006
Transmission
Max Transmission Distance	6.2 Miles / 10 km
Video Format	Composite 1080p: 23.98/24/25 fps 1080PsF: 23.98/24 fps 1080i: 50/59.94/60 fps 720p: 50/59.94/60 fps NTSC PAL
Supported Cable Types	Single-Mode Fiber
Power
Power I/O	1x Barrel (8 to 24 VDC) Input
Power Consumption	12 VDC (3.4 W)
General
Operating Conditions	41 to 104°F / 5 to 40°C up to 90% Humidity
Dimensions	5.5 x 1.7 x 0.9" / 140 x 42 x 22 mm
Weight	4.4 oz / 125 g
Packaging Info
Package Weight	1.4 lb
Box Dimensions (LxWxH)	10.4 x 8.9 x 3.5"

Supports analog black burst, bi-level, tri-level sync signals
Supports up to 1080p60 video

Related Questions and Answers

Q: 1. Hello. Please tell me are LC SFP modules included in Lynx Technik AG OTT 1812 BH #LYOTT1812?

A: Yes, An SFP is included with the Lynx Technik AG Dual-Channel 3Gbit SDI to Fiber Transmitter. Includes Module, SFP Module, AC power supply

Q: 2. Can you use to DJI Transmitters with one DJI High Bright monitor?Let's say I have a transmitter on camera A and camera B...

A: The DJI High-Bright Remote Monitor can only connect to one DJI Wireless Video Transmitter at a time.

Q: 3. Can you use this transmitter on the RS3 Pro in conjunction with the RavenEye transmitter at the same time? Or is it one OR the other ?

A: Unfortunately, the DJI Wireless Video Transmitter cannot be used simultaneously with the DJI Ronin RavenEye Image Transmission System for RS 2 & RSC 2 when mounted and powering through a gimbal, but if you are able to power the DJI Wireless Video Transmitter away from the gimbal and you have HDMI and SDI simultaneous output from the camera, both transmitters can be used.

Q: 4. Does this TX/RX SFP module fits in Black Magic Optical Fiber Mini Converters?

A: That will depend on the model of Blackmagic Converter you are using. So that we may best assist you finding the proper product for your needs feel free to email us directly at askbh@bhphoto.com.

Q: 5. Will this work with the Rs3 gimbal?

A: The DJI Wireless Video Transmitter is only supported on The DJI RS2 or RS3 PRO gimbals at this time.

Q: 6. Is there a pre-made XLR audio break-in/out cable assembly available from Lynx Technik (or someone else) that could be used with the 25 pin connector on this unit?

A: According to the manufacturer, that while the included D-Sub Screw Terminal Adapter PCB answers the needs of 99% of it's users, there is a special order item. that might suit you RAC MF25-4/4 Adapter Cable. http://bit.ly/1eg8tKW If you wish to order this, please email us. provideo@a href= http://bhphotovideo.com target= _blank bhphotovideo.com./a

Q: 7. Do y'all think the latency is fast enough to pull focus?

A: No, the DJI Wireless Video Transmitter does not provide stable enough signal to use for focus pulling reliably and with consistency of transmission.

Q: 8. Does it have its own remote controller ?

A: It does not come with a remote controller. You can get the Cinetics Lynx Controller as a separate item. https://tinyurl.com/3hs3kbr8

Q: 9. Will this transmit video to a phone?

A: The DJI Wireless Video Transmitter is only compatible with the DJI High-Bright Remote Monitor and DJI Wireless Video Receiver.

Q: 10. How many receivers can be used with one transmitter?

A: According to Hollyland, the Hollyland Mars 4K Wireless Video Transmission System will support 2 receivers.

Stephen	12/09/2024
[1.4 lb] Lower cost than most cable reels, good quality. I am using this for a CAT5e digital audio snake. A side reel for the tails would be a big plus. 5

ICDave	23/08/2024
[12 VDC (3.4 W)] Plugged it in and it worked with no adjustments or configuration necessary. Long connection with fiber looks exactly like short connection with DVI cable. I'm running a 1920 x 1200 monitor at 60 Hz. 5

Jose	18/08/2024
[1.4 lb] I had to drill large holes in the very center of the plate to allow for easy in/out of the short end of the cable. After that these reels worked great. Totally worth the price and the headache relief of under/over cable wrapping until your arms fall off. I started with 1 and bought 5 more recently. 5

Mariano	15/07/2024
[1.4 lb] Great profesional reel at a really reasonable price, I look for tons of options an and for the price this was the best! 5

anyonymous	19/06/2024
[1.4 lb] We have used this product many times for sending the DVI signal 700+ feet from the computer. No problems at all. Just attach them and they work. 5