This Hoya 62mm-86mm Adapter Ring SQ100 Filter Holderfrom Hoya 62mm-86mm Adapter Ring SQ100 Filter Holderallows the HOYA Sq100 Filter Holder's 86mm filter thread to be attached to lenses with a 62mm filter thread.

Adapter Ring for SQ100 Filter Holder System

Related Questions and Answers

Q: 1. Will this filter fit on my nikon 18mm-55mm AF-S lens?

A: Yes it will. The Nikon 18-55mm lenses use 52mm sized filters.

Q: 2. Can this be used with a Canon Powershot SX420 is ?

A: No, this filter is not compatible with the SX420.

Q: 3. hello! could this fit and work on the G Master 70 200mm? Thanks!

A: Yes, the Hoya 77mm NXT Circular Polarizer Filter will fit and work on the Sony FE 70-200mm f/2.8 GM OSS Lens.

Q: 4. Is this wide angle adapter ring compatible with the Seven5 filter system? I'm looking to add this to the front of a 12-40mm lens and I 'm concerned with vignetting from the standard adapter ring.

A: 12-14mm it been consider a ultra-wide angle lens yes you will get vignette if you form 20mm and up it ok. but for more info I recommend you to lee web click on camera scroll down to Lee Match system click on the button Good look Jose.

Q: 5. What is the proper technique for attaching the filter to the filter threads on the front of the lens? The filter is very thin, with very little to grip, but is further rendered difficult to screw on by the presence of the rotating section of the filter. Basically you can only hold the rotating part so it is tough to get the threaded portion to turn and screw into the threads on the lens. The rotating part just rotates so you can barely get any torque on the threaded portion. I finally got mine to screw in by pushing firmly toward the lens as I turned the filter. I don't want to damage anything. When using this technique the threaded portion turns slowly because it drags more on the lens threads.

A: Since submitting this question, I had a chance to look closely at the filter with my OptiVisor. It seems there is a very thin knurled ring on the threaded part of the filter just below the rotating part. I will have to practice and see if I can master threading it to the lens without cross threading or otherwise damaging anything. I do have a filter wrench, but the threads are so fine and delicate that it is even more difficult to tell if you are crossthreading. That will take some practice, too. The lens filter threads are inside a metal ring of sorts that prevents full sized fingers from being able to grip that knurled surface enough to be able to turn the ring to thread it in.

Q: 6. What material is the metal?

A: They are made of aluminum.

Q: 7. Is it normal for a circular polarizer to have movement once attached to the lens?

A: Define movement. It screws on and that should be tight (no movement). The filter itself turns to orient the angle of the polarization (as opposed to a non circular polarizing filter which only really works when shooting in landscape mode)

Q: 8. Does this filter work on the Sony RX 10 iii?

A: Yes it will.

Q: 9. Why won’t this filter tighten on my lens? It’s a 62mm and that what my lens takes.

A: The loose portion is the adjustment ring for polarization. Otherwise the filter will fit tight to your filter thread on the lens.

Q: 10. Would the Schneider 94-251062 ring be and equivalent to the lee ring..Would it be compatible with a lee filter holder?Thanks

A: The Schneider 62mm adapter ring is the equivalent size, however it will only be compatible with Schneider filter holders. The Lee Filters adapter ring will be compatible with a Lee filter holder.