Charge two V-mount batteries simultaneously with the IndiPRO Tools Dual V-Mount Intelligent Battery Charger. Its intelligent interface identifies the battery's capacity and selects the appropriate charging current. Batteries under 100Wh are charged at 3A and batteries over 160Wh at 6A. Any batteries that fall within the 100 to 160Wh range are charged at 4.5A.

An integrated LCD screen displays the charging status of each battery. Top vents ensure proper heat dissipation and prevent overheating. The charger has a compact form factor and a built-in carry handle for portability.

2 x 98Wh Li-Ion V-Mount Batteries    Two-Bay V-Mount Battery Charger    Supports up to 12A Continuous Draw    D-Tap and USB Accessory Outputs    4-LED Power Gauge    Compact Form Factor    Charge/DC-Out/Off Mode Switch    Built-In Charging Capacity Manager    Integrated Carry Handle for Portability

Related Questions and Answers

Q: 1. Are these compatible with RED cameras in showing the percentage of battery level left?

A: These batteries can power up the RED cameras but will not show the percentage of the battery level left. We offer a line of batteries that are compatible with the RED cameras, see the link below: https://www.bhphotovideo.com/c/search?Ntt=rdm98s&N=0&InitialSearch=yes&sts=ma&Top+Nav-Search= Please let us know if there have anymore questions.

Q: 2. Does this battery worknwith the new Canon R5 C? If so, about how much time will it last? The normal LP-E6NH last 30 to 45 min in video mode.

A: Yes, it's possible to use a large battery with a D-Tap (or P-Tap) power port such as the IndiPRO Tools Micro-Series V-Mount Li-Ion Battery (98Wh) (B&H# INVMP98S) with the Canon EOS R5 C Mirrorless Cinema Camera (B&H# CAER5C). The battery itself would need to be mounted somewhere else such as on a battery plate attached to a rod system since it is much too large to fit into the battery compartment of the camera. You would then connect a cable such as the Anton Bauer P-Tap to Canon 9V Barrel Cable (20") (B&H# ANPC9RBSC) to a DC coupler such as the Canon DR-E6C DC Coupler for EOS R5 C (B&H# CADRE6C) which would go in the battery compartment of the R5 C. It would last for hours of use.

Q: 3. How long could this battery power a Blackmagic Pocket 4k?

A: This battery will allow the Blackmagic Pocket 4K to last about 5 to 6 hours.

Q: 4. Can I charge this battery while still attached to the camera?

A: With the camera off, it would be possible to charge the IndiPRO Tools Micro-Series V-Mount Li-Ion Battery (98Wh) (B&H# INVMP98S) through its D-Tap port while it is attached to the battery plate of a camera.

Q: 5. Is this compatible with the Godox VL150? The power supply says input 100-240v @2.5A max and output 16.8V / 10A, 168W. Thanks!

A: Yes, you can use this battery on the Godox lights.

Q: 6. *how long will the 270s last with the p300c at full power?

A: Indipro Tools states that the IndiPRO Tools Micro-Series V-Mount Li-Ion Battery (270Wh) offers an estimated time of 1 hour and 35 minutes using full power on the Aputure Nova P300c RGB LED Light Panel.

Q: 7. Can the battery be used to power a camera while plugged into the charger? The DTap charger is a lot easier to attach and detach safely than the BMP6K's native power plug. The box doesn't seem to have included an instruction manual, so I'm unable to determine whether trying to charge and discharge simultaneously is valid/safe usage.

A: It's not advisable to use a D tap charger to charge the battery while powering the camera simultaneously because of possible issues of handling the voltages with the on board power management of the battery. If you have a battery plate that offers power in with outputs like the Wooden Camera D-Box builds, that is a route to consider.

Q: 8. Will the USB-A on the battery supply enough voltage to run the Canon R5 using the USB-C? Is it a power delivery port?

A: No, The USB output is not PD or 9v which is the Requirement for the R5C. The USB port on this IndiPRO Tools Micro-Series V-Mount Li-Ion Battery is 5v.

Q: 9. Will this work with the Z Cam K1 Pro?

A: yes they will power the Z cam with the right D tap power adapter

Q: 10. Will this work on the RED Scarlet MX?

A: Yes this battery system will work with the RED Scarlet MX