Arri Ultra Prime Lds Lens Case For 6 By Jason Cases

Product Code: eq126991
Availability: In Stock

$1,497.00 $2,125.74

Qty

18 reviews Write a review

Description
Reviews (18)

The compact genuine Pelican 1510 Case from Jason Cases has a laser-cut, high-grade foam insert that is custom cut to hold up to six ARRI Ultra Prime LDS lenses. The watertight and dustproof case weighs only 12 lb when empty.

Watertight & Dustproof Case Holds 6 ARRI Ultra Prime LDS Lenses Laser-Cut, High-Grade Foam Insert Built-In Wheels, Retractable Handle

Key Specs
Color	Black
Carry/Transport Options	Retractable Handle, Handle, Wheels (Built-In)
Type of Closure	Latch
Interior Type	Main Compartment: Insert with Custom Compartments
Water Resistance	Waterproof
Dimensions	Exterior 22 x 14 x 9" / 55.9 x 35.6 x 22.9 cm
Weight	12 lb / 5.4 kg
Parameters
Dedicated Lens Compatibility	ARRI Ultra Prime LDS 16mm T1.9 ARRI Ultra Prime LDS 24mm T1.9 ARRI Ultra Prime LDS 32mm T1.9 ARRI Ultra Prime LDS 40mm T1.9 ARRI Ultra Prime LDS 50mm T1.9 ARRI Ultra Prime LDS 85mm T1.9
Carry/Transport Options	Retractable Handle, Handle, Wheels (Built-In)
Type of Closure	Latch
Interior Type	Main Compartment: Insert with Custom Compartments
Features
Pressure/Purge Valve	Yes
Security Lock	Accepts Padlock (Not Included)
General
Water Resistance	Waterproof
Padded Interior	Yes
Dimensions	Exterior 22 x 14 x 9" / 55.9 x 35.6 x 22.9 cm
Weight	12 lb / 5.4 kg

ARRI Ultra Prime LDS 16mm lens
ARRI Ultra Prime LDS 24mm lens
ARRI Ultra Prime LDS 32mm lens
ARRI Ultra Prime LDS 40mm lens
ARRI Ultra Prime LDS 50mm lens
ARRI Ultra Prime LDS 85mm lens

Related Questions and Answers

Q: 1. Does the stool spin?

A: While the legs on the base of the LDS Monte Zucker Pneumatic Posing Stool are designed to remain stationary, the seat on the top of the stool does spin to allow you to rotate and pose your subject.

Q: 2. Would drop-in filters that fit the Canon RF-EF adapter work with this?

A: No, only the NiSi drop-in filters are compatible with the NiSi ATHENA PRIME lenses that are included in the NiSi ATHENA PRIME T2.4/1.9 Full-Frame 8-Lens MASTER Kit (Canon RF).

Q: 3. Is it possible to buy just a replacement seat?

A: We do not carry that part separately. Best is to contact the manufacture for that.ALMTel: (602) 454-0786Website: a href= http://www.almlive.com/ target= _blank http://www.almlive.com//a

Q: 4. How do you adjust back focus on the Arri Alura 15.5-45mm lens?

A: The ARRI Alura 15.5-45mm T2.8 F Wide-Angle Zoom (LDS PL, Feet) (B&H# ARAZ1545T28F) can perform differently on different cameras and mounts. As such, you may want to add shims between the lens mount and lens body to adjust the back focus.

Q: 5. Is this alura 1.4 X extender comparable with Zeiss lwz 3 21-100 mm t/2.9-3.9 lens

A: no this will not be compatible with the Zeiss Light weight zoom

Q: 6. Are these able to used with the BMPCC 6k Pro?

A: Yes, the VESPID Prime 5-Lens Kit (ARRI PL & Canon EF) will work with the BMPCC 6K Pro when using the Canon EF mounts.

Q: 7. Lens case dimensions?

A: The outer dimensions are roughly 18x17x9.5"

Q: 8. Does this cap work with the NiSi 114mm Shatter-Proof Protector Filter?

A: You would not be able to put this on top of a filter. It would have to be either one or the other on the lens.

Q: 9. Will these lenses with EF-mount be compatible with 0.71x focal reducers?

A: The DZOFilm VESPID Cine Prime 10-Lens PL Mount and EF Mount Kit will be compatible with both types. More importantly is what system it is being used on, which is needed to answer this question properly.

Q: 10. Sometimes extenders/teleconverters allow APS-C lenses to be used on full-frame cameras. Does this extender, combined with an adapter, allow the S35 Alura lenses to cover FF sensors and thus be used on FF cameras?

A: While it may increase the area of coverage, no, the ARRI Alura LDS Extender 1.4x Lens for ARRI/Fujinon Alura Zoom Lenses & More (B&H# ARAE1.4XLDS) does not effectively allow an APS-C (Super 35) lens to cover a full frame image sensor with a high quality image circle.

Carlos	17/09/2024
[Black] Purchased this to store our new Fuji MK-R's (by Duclos). The lens mount and cap is a little larger than the mold. Makes sense as this case was molded for MK-E/MFTs. I had to do some shaving of the mold at the mount. Not bad but perhaps I'd contact Jason Cases directly to see if they can update this case or do the shaving for you(?). 5

Ryan	16/09/2024
[Yes] This is the fourth case I've had from Jason Cases and it's fantastic. I have the original 6 lens Xeen case they made, but then Xeen came out with two more lenses and once I picked them up I knew I wanted the 8 lens case. It's (seriously) heavy and huge, for sure, but it has great custom cut foam and offers unbeatable protection for your lenses. Highly recommended. 5

Jay	14/09/2024
[Latch] I'm a big advocate on investing in well designed and constructed cases to protect the production gear I use for work, and when I started traveling the country for a documentary this year, I started looking for a case to protect my 4 batteries and charger. Jason Cases never disappoint! 5

Brian	26/08/2024
[Yes] This case is big and you know that going in. It allows me to keep the FX9 totally built with a Small Rig baseplate and shoulder rig as well as a Gold mount adapter attached. There's a ton of well thought out space for batteries, a charger, cables and other essentials. 5

Anthony	02/08/2024
[Latch] They case is very well done. It has plenty of space to store items and is very durable. It is one of the few options available for the FX9. 5

Terry	02/08/2024
[Yes] Perfect case for this set of lenses with room for my focus attachment and lens cleaning material. I've used Pelican Cases for years and they have always protected my gear. 5

Art	18/06/2024
[Yes] I just purchased 2 Black Magic URSA Studio cameras and knew the challenge to have one case include cameras, accessories and add extra studio viewfinder was going to be a challenge. Jason Cases was the best choice due to it's well-designed cases, and size. And the extra cutouts allowing for miscellaneous equipment was the icing on the cake! Well Done! 5

Aeyron M.	16/06/2024
[Yes] Purchased this product for my Red Epic W. Incredibly well built interior. It's exterior is a pelican case with a custom fitted interior which is very well made and saves a great deal of space. Company is very responsive with questions about their products and pretty fast with shipping. 5

charles	16/06/2024
[Latch] Jason Cases are the best! Customer support excellent! I contacted them before buying and they talked me through everything even sent Pics of the case with All Accessories in the case since the camera had not shipped to everyone yet. But they Had one and Sent me Photos of How it would fit and it Fits perfectly! NO other company would do that!! LOVE THOSE GUYS!!! 5

Robert	13/06/2024
[Black] Well made, and fits the BMD ATEM 1ME desk perfect. We just used it to travel to Vegas and checked it as baggage, it was totally fine. 5