The Voice Technologies VTO Box is an empty OtterBox with a foam insert, made to carry and protect a Voice Technologies VT400, VT500, VT502 or VT506 lavalier microphone. The box is made from high-impact polycarbonate.

High-impact polycarbonate case made to carry lavalier microphones.

Custom foam insert

Shoelace-type neck strap is included.

Compatible with Voice Technologies VT400, VT500, VT502 or VT506 lavalier microphones

Related Questions and Answers

Q: 1. How long is the cable on this microphone? From end to end?

A: The length of the cable of the Point Source Audio Series8 CO-8WLh Omnidirectional High-Sensitivity Waterproof Lavalier Microphone (Sony, Beige) is 4' / 1.2 m.

Q: 2. Does it requieres 48V phantom power?

A: No 48v will damage mic only 1.5 to 5volts on the transmitter to power mic, if you only have Phantom Power 48volts, get a lavaier with an XLR connection instead.

Q: 3. Will it work with Rode Wireless ME/GO? Specifically, the voltage requirements and the 3.5mm locking connector compatibility.

A: The Sennheiser MKE1 Professional Lavalier Microphone requires 4.5 to 15V. We would not recommend using this microphone with the RODE Wireless ME or the Wireless GO and Wireless GO II Compact Digital Wireless Microphone Systems because the transmitters have non-locking inputs so the mic would not be securely connected and most high-end lavalier microphones do not function properly when used with either of these wireless systems. The Sennheiser MKE series mics work much better with wireless transmitters such as the Sennheiser SK 500 G4 and SK 100 G4. From our testing, the microphones that work best with the RODE ME, GO, and GO II Wireless Microphone Systems are the RODE Lavalier II Omnidirectional Lavalier Microphone (B&H # ROLAVALIERII), the Saramonic DK3G Omnidirectional Lavalier Microphone (B&H # SADK3G), the Shure MOTIV MVL Omnidirectional Lavalier Microphone (B&H # SHMVL35MM), and the Saramonic SR-M1 Omnidirectional Lavalier Microphone (B&H # SASRM1).

Q: 4. Will this work with the MKE-2?

A: Hi, yes this will work with the MKE-2 microphone. Thank you for shopping at B&H!

Q: 5. Can the receiver and transmitter charge while in use?

A: It is possible to operate the transmitter and receiver when they are charging, however, Sennheiser does recommend turning the units off during charging. More details are listed here, under "charging the rechargeable battery": https://bit.ly/3Tfq0rz

Q: 6. Would I be able to use this mic on a Polson Transmitter without any issues?

A: Yes as long as the jack size is the same..... Mike works great.

Q: 7. Can the receiver unit receive two simultaneous channels or can it only receive from one transmitter at a time?

A: No it can’t. In the features it clearly says: “Multi-pairing lets you quickly switch between multiple transmitters linked to one receiver (note that only one transmitter can broadcast to one receiver at a time)”

Q: 8. Is this manufactured out of metal? Or is the spring at least made out of metal. I used plastic ones before and they all 3 broke with very minimal use.

A: Yes it is made out of metal.

Q: 9. Is there a gain control?

A: No, there is no gain control. These are meant to be a cable replacement only. For a unit with gain control, here's a similar 2.4ghz option BH #RORODLNKFM.

Q: 10. If you bought two sets of this version of the XS kit, will the XLR receivers clear the XLR jacks and camera body of a Sony FS-7M2?

A: Due to the physical build of the Sony PXW-FS7M2 XDCAM body and the form factor of the Sennheiser XSW-D XLR MALE RX Plug-In Receiver, it does not appear that the receivers in the Sennheiser XSW-D LAVALIER SET Digital Wireless Omni Lavalier Microphone System will successfully mount to the XLR inputs on the PXW-FS7M2 camera.