Enjoy simple setup and lights-on projection with the Elite Screens FTE122H3-C4D Kestrel Tab-Tension 3 CLR 4D 59.8 x 106.3" Motorized Rising Projection Screen. The FTE122H3-C4D is a 16:9, 122" diagonal, motorized rising screen with Elite's ISF Certified, ambient-light-rejecting CineGrey 4D screen surface.

This electric floor-rising screen is housed in an elegant, black aluminum case that plugs into a standard 3-prong electrical outlet. There is no complicated installation needed, just plug and play. The CineGrey 4D surface is designed for standard-to-long throw projectors with a throw ratio greater than 1.4:1. The angular reflective material rejects up to 63% of ambient light and is ISF certified for color accuracy, ideal for environments with little or no control of indirect lighting such as family rooms, lecture halls, boardrooms, or training facilities. For your convenience, IR, RF, and 12V trigger controls are included.

122" Diagonal | 16:9 Aspect Ratio    CineGrey 4D ALR Screen Surface    1.1 Gain | 70° Viewing Angle    For Minimum 1.5:1 Throw Ratio Lenses    Up to 63% Ambient Light Rejection    ISF Certified for Color Accuracy    Black Aluminum Housing    Tab-Tensioned Design Keeps Images Flat    IR, RF & 12V Trigger Controls Included    Plug & Play Standard AC Power Cord

The CineGrey 4D is a 1.1 gain, flexible front-projection, ceiling-ambient light rejecting material for standard throw projectors. It can reject up to 63% of off-axis lighting while providing a bright, contrast-rich image in moderate light room environments. The CineGrey 4D produces outstanding images with a balanced color temperature for residential and commercial applications. The ambient light rejecting properties assist in maintaining picture clarity that does not wash out the image like typical matte white surfaces do under ambient light conditions.

To obtain ISF certification a projection screen must meet a list of essential ISF qualities such as accurate color fidelity, uniform spectral response, and black level performance.

• Not compatible with ultra-short and short-throw projectors
• Uses a multilayer matrix with reflective and absorbent micro-particles to eliminate 63% ambient light
• 4K/8K Ultra HD, HDR, and Active 3D compatible
• Moisture resistant black aluminum housing
• Rises and lowers using “scissor-backed” industry grade cross spring risers
• Tab-tensioned design to ensure a taut and flat ripple-free projection surface
• Includes Infrared (IR) and Radio Frequency (RF) handheld remote controls
• Wireless 12V trigger included
• Up/Stop/Down toggle switch for manual operation

Related Questions and Answers

Q: 1. The Goodman base is offered as an accessory. Does that mean it does not come with the viewfinder? Description is a little confusing.

A: The Hoodman I purchased from BH Photo included the full unit which included the base.

Q: 2. Please tell me the model which fits a Canon EOS 5Ds and Canon EOS 7D Mk II?

A: I have both a Canon 5D Mark IV and a Canon 7D Mark II. Their LCD screens are different sizes, with the 5D being larger. The Hoodman Loop being discussed fits the 5D screen well while being a little bigger than needed for the 7D screen, thereby giving some awkwardness to its use with that body. Mike R.

Q: 3. does Hoodman H32MB works with Nikon D90?

A: The Hoodman HoodLoupe Outdoor LCD Viewfinder for 3.2" Screens (BH #HOH32MB • MFR #H32MB) works with the Nikon D90 SLR Digital Camera.

Q: 4. Would this fit the Sony A6300?

A: Yes, it will fit.

Q: 5. Will this fit my Fujifilm X-T2?

A: This will not fit the Fuji x-t2; you will need the one that fits a 3" screen: https://bhpho.to/2Z59a1P

Q: 6. Does it fit a canon 6d markll?

A: yes.

Q: 7. can it be used underwater?

A: I wouldn't.

Q: 8. Will this hood loupe work for the Canon 1dx mark iii? Although the 1dx mark iii has a 3.15" screen, I'm wondering if there might be an issue with the right side edge of the hood loupe hitting the 1dx main dial, and therefore, the hood loupe would not properly fit/align over the LCD screen.)

A: It would work perfectly fine

Q: 9. Does this fit a Nikon D600? I tried the Elvid Optiview 3.2 viewfinder and it did not fit - it was too small height-wise and width-wise it interfered with the buttons.

A: I use it on my D7100. It fits over the screen well but overlaps the buttons a bit. My screen is 3.2 diag. Around 2.5 horz. The loop opening is 2.75 and 3.125 from edge to edge. I was thinking the smaller size would fit better even if it slightly covers the image. I use it just for focus so it doesnt bother me.

Q: 10. Does it fit Nikon Z7 ?

A: Yes, it does fit the Z7's screen.