Teradek Rt Single-Channel Wireless Lens Control Kit Motr.S

Teradek Rt Single-channel Wireless Lens Control Kit Motr.s

Product Code: eq127581
Availability: In Stock

$10,497.00 $13,226.22

Qty

16 reviews Write a review

Description
Reviews (16)

Designed to improve upon previous models, the Teradek RT Single-Channel Wireless Lens Control Kit MOTR.Sis an ultra-compact, lightweight, and speedy lens control unit capable of adjusting focus, iris, or zoom functions. The motor has a maximum torque of 0.95nm and a maximum speed of 297 teeth per second. Balanced cable management ensures your 0B 4-pin connections redirect cables and prevent them from getting in the way of your camera configuration.

An improved rod clamp is compatible with both 15 and 19mm rods. One 0.8 MOD lens gear is included and separately available gears can expand lens compatibility. The MOTR.S can be daisy-chained to suit your needs. The motor supports an operating voltage up to 32V.

MDR.S Compact Receiver MOTR.S Lens Motor CTRL.1 Wireless Lens Controller Pre-Marked Focus Rings, Iris Ring Motor, Controller, USB, and D-Tap Cables LP-E6 Battery with Charger Mounting Brackets, Neck Strap Hard-Shell Case with Custom Foam

General
Gear Pitch	0.8 MOD
Maximum Torque	0.95 nm (Peak) 0.3 nm (continuous)
Maximum Speed	297 teeth per second
Connectors	2 x 0B 4-Pin
Power
Power Source	Plug-In Power
DC Input Power	7 to 32 VDC
Operating Current	1 A (Standby) 2 A (Maximum)
Environmental
Operating Temperature	32 to 82°F / 0 to 50°C
Physical
Mounting	1x 15mm Rod Clamp 1x 19mm Rod Clamp
Color	Black
Material of Construction	Aluminum
Dimensions	4.2 x 2.2 x 1.2" / 106 x 56 x 31 mm
Weight	6.5 oz / 184 g
Packaging Info
Package Weight	0.57 lb
Box Dimensions (LxWxH)	6.4 x 4.1 x 3"

More compact and lightweight form factor

Redesigned aluminum chassis, reinforced sockets, next gen circuit boards

New 15/19mm rod clamp with better located handle

0.95nm maximum torque, 297 teeth per second

Related Questions and Answers

Q: 1. Will this work with DSMC3 RED's?

A: The Teradek MDR.X 3-Channel Lens Control Receiver with Bluetooth is only tested to work on the RED DSMC2 systems.

Q: 2. Can you reverse the direction of the motor?

A: With the Movcam Single-Axis Wireless Lens Control System, the motor direction cannot be changed. Motor direction change is available on a different, more advanced model, the MCS-1.

Q: 3. Does this work with a Y motor cable from previous generation MDRs from Teradek RT so that two 3.1 motors can be used?

A: No, the Teradek MDR.S Compact 3-Channel Lens Control Receiver with Bluetooth will not work with a Y motor cable from the previous MDR.

Q: 4. What accessory is needed to easily mount the MDR.x with the through hole? So it doesn't wobble/rotate around anymore.

A: The hole in the Teradek MDR.X 3-Channel Lens Control Receiver with Bluetooth (B&H# TE150010) is typically used with a bolt for mounting it to a cage or other threaded female tap, as shown here: https://bit.ly/3Mglc0M

Q: 5. Does this support the thumbwheels?

A: The Teradek MDR.S Compact 3-Channel Lens Control Receiver with Bluetooth does not list compatibility with the Teradek RT Thumbwheel S Standard Wired Controller.

Q: 6. Can you do run/stop from Alexa via R/S cable (Fisher to 3 pin lemo) without connecting to 3 pin fisher to Camera port on MDR.S?

A: The Teradek MDR.S Compact 3-Channel Lens Control Receiver with Bluetooth would work with the following Run/Stop cable. Teradek ARRI Run/Stop Cable for MDR.X Receiver (24") BH #TE111476 https://bhpho.to/3Zqb4Zo

Q: 7. What is the difference between the Motr.s Max and the Motr.s?

A: As the Teradek RT MOTR.S Max Lens Motor systems are new releases, our data on the products are limited. Teradek has provided details on the Teradek RT MOTR.S Lens Motor, but we are awaiting further details on the Teradek RT MOTR.S Max Lens Motor, which should be forthcoming shortly.

Q: 8. Does this support tof.1?

A: It does not. You will need to use the MDR.X.

Q: 9. How is this powered? From the side of the DSMC2 Brain or from the DC outlet I see on the bottom? Thx.

A: This product requires a RED-approved DSMC2 Expander module with an RS-232 control port, such as B&H # REDSMC2IOVLE. Once you have the Expander the required cabled are included with the Teradek product. https://bhpho.to/2B1IpRG

Q: 10. Does this come with the power cable?

A: Yes, the Teradek MDR.S Compact 3-Channel Lens Control Receiver with Bluetooth (B&H# TERTMDRSLCRB) includes the Teradek RT Power 3-Pin D-Tap (also called P-Tap) Cable. That has a D-tap (compatible with P-tap) male connector on one end and a male 3-pin connector on the other for power.

james	24/09/2024
[0.8 MOD] Red chose a very tiny lemonier port, so the cable is very thin and needs some care to avoid damage. considering the realities, Teradek did a good job. 5

Melvin	17/09/2024
[Black] Works great with very little noise. 5

Michael	11/09/2024
[6.4 x 4.1 x 3"] Outstanding quiet device, I use it to lower the lever to my Harmony pedal. I'm in a group, so I take a direct out from my MixWiz, which is too strong for the pedal, this unit takes it down to clean level, and the pedal performs flawlessly. I can build this device myself, but the quality, and the compactness of this device, and the fact that it is 1/4 connectors solves all the little problems at once, Sescom does it again, Thanks.. 5

Audey	27/08/2024
[0.8 MOD] I needed to control the volume for an acoustic guitar with a pickup. This volume control does the job quite well. I am well pleased with its performance. 5

Todd	06/08/2024
[6.4 x 4.1 x 3"] I'm a voice actor and utilize both a VO sound booth and a separate engineering station outside the booth. I wanted a compact volume control for my headphone inside the booth because my audio interface is located in the engineering station, not inside the booth. This device is perfect! I attached it to a small table and can ride it like a fader if need be for live, directed sessions with other studios, as well as coaches. Great build quality and lossless audio. Very happy! 5

Zachary	27/07/2024
[0.57 lb] works the same as a cinetape. with the added benifit of on screen readouts 5

Aaron	19/07/2024
[Aluminum] Simple and straightforward. Plug one end into the 1/4 jack, the other into your headphones, and now you have volume control. I used it to control the monitor volume on my Denon cassette deck, which did not come with a built in monitor volume control (a lot of cheaper decks did not come with them). 5

Conrad	29/06/2024
[6.4 x 4.1 x 3"] Used it with the V-mount/IO expansion module and it worked as expected. You'll need to set the RTMotion controller to the ARRI trigger mode with this configuration. 5