Enjoy pro-level audio quality in your videoconferences with the white Vaddio EasyIP CeilingMIC/AMP D Microphone - Whitefrom Vaddio. This white ceiling-mounted microphone uses lossless digital Dante networked audio and integrated echo cancellation to produce crisp, clear audio. The interface box can be linked with other units to cover larger rooms and its interface box can be positioned up to 100' from the network switch. It features a speaker amp with a 2-pin speaker output that can power a single analog speaker or multiple speakers in a series.

Compatible with Vaddio EasyIP components or any Dante audio system, the triple-element array head captures 360° audio and features a 3' adjustable drop cable with support for up to a 15' cable. The DSP (digital signal processor) can be controlled with Vaddio's desktop configuration tool and the free Dante controller software can be used to configure signal routes and additional settings. A silicone split strain relief boot, a 3' Cat 6 cable, a mic interface box, a cable clamp grommet, two ceiling trim ring plates with mounting screws, and a ceiling tile brace are included.

Dante Networked Audio Signal    3-Element Array Head/360° Coverage    Powered Analog Speaker Amp Interface Box    3' Cat 6 Drop Cable/Supports up to 15'    Echo Cancellation & Digital Processing    Extends up to 100' via Cat 5 Cable    Eliminates Table Clutter    Plug-and-Play RJ45 Design/PoE    Includes Ceiling Mount Hardware    Mic Comes in White Color

Vaddio EasyIP products and other systems with Dante audio

The AMP interface box can be located up to 100' from the network switch, and the single 2-pin terminal speaker output can power one speaker or multiple speakers if wired in series or parallel, and the total load is greater than or equal to 4 ohms

Creates a clean look in your conference room or meeting space

Lossless digital audio is distributed over Cat 6 Ethernet cable

Integrated digital signal processor and echo cancellation for clear audio

Three-element array head captures 360° audio

The included 3' drop-down cable can be swapped out for lengths up to 15'

For drop-tile ceilings and open-ceiling environments

Plug-and-play design supports PoE

Two-piece trim plate design can be installed after completing the rest of the installation

Cloth-wrapped microphone design with improved geometry provides better audio pickup

Related Questions and Answers

Q: 1. what is the dimensions of the base plate?

A: The dimensions of the base plate of the OC White B&H # OC52900B are 2 x 3.

Q: 2. Can it be hanged fron the ceiling so you can pull the mic down to use it?

A: That function would not be possible with the O.C. White Deluxe Microphone Arm and Riser System.

Q: 3. Does the camera allow for POE via the ethernet port?

A: No POE for this camera.

Q: 4. Deos this model (Panasonic RP-HF100M) have a microphone. The title states that but I cannot see it in the specs?

A: Yes, the Panasonic Lightweight On-Ear Headphones with Microphone and Controller (White) BH #PARPHF100MW has a built in line control and microphone.

Q: 5. Is there anyway to record audio with this device ?

A: There are currently no audio recording options defined by manufacturer.

Q: 6. How do I flip the image on the camera if it's ceiling mounted

A: In order to flip camera image go to back of PTZ camera base and locate the Camera Settings: DIP switches adjust the following features Ir remote frequency Baud rate Image flip

Q: 7. Is there any way of converting the end connection to usb on this product?

A: There is not. This product works over Cat5 cabling.

Q: 8. How many starts can you get on one charge?

A: That information is not published by the manufacture.

Q: 9. Can I verify that this does indeed work with and extend USB 3.2 Gen 1? Vaddio's site states USB 3.1 only for this part #.

A: You are correct, the Vaddio USB 3 Extenders will support up to USB 3.1, not USB 3.2 as it is currently labeled on our listing. We will correct the listing.

Q: 10. Will this mic work on an iphone with 3rd party video apps like, Moza genie, Dji or other gimbal manufacturers?

A: As two separate mics going bluetooth to the phone, no. That can only be achieved using their specific app for recording. As a single mic when set into Transmitter/ Receiver mode, then you could buy using a TRs to TRRS cable and the required headset adapter for your phone. Here's an example of the cable required for the receiver B&H # ROSC7.