Seagate 8Tb Ironwolf Pro 7200 Rpm Nas Hdd Sata Iii

Seagate 8tb Ironwolf Pro 7200 Rpm Nas Hdd Sata Iii

Product Code: eq127997
Availability: In Stock

$599.97 $929.95

Qty

13 reviews Write a review

Description
Reviews (13)

Designed to deliver performance, reliability, and dependability in multi-bay, multi-user RAID and NAS environments within commercial and enterprise settings, the Seagate 8TB IronWolf Pro 7200 rpm NAS HDD SATA IIIfrom Seagate 8TB IronWolf Pro 7200 rpm NAS HDD SATA IIIis built to withstand 24/7 operation, or 8760 hours per year. This 8TB drive has been equipped with a SATA III 6 Gb/s interface, a rotational speed of 7200 rpm, a 3.5" form factor, and a 256MB cache, providing users with ample storage capacity with data transfer speeds of up to 255 MB/s. The IronWolf Pro also has an MTBF rating of 2 million hours and a workload rate of up to 550TB per year. Seagate's AgileArray technology provides dual-plane balancing, time-limited error recovery (TLER), and rotational vibration (RV) sensors to deliver enhanced RAID performance. Included is a limited 3-year Data Recovery Service that helps you retrieve damaged data in the event of a mechanical error, accident, or natural disaster, and overall protection is provided by a limited 5-year warranty.

8TB Storage Capacity 3.5" Form Factor SATA III 6 Gb/s Interface 256MB Cache 7200 rpm Up to 255 MB/s Data Transfer Rate 2 Million Hours MTBF Workload Rate: 550TB per Year AgileArray Technology Seagate Rescue Data Recovery

Key Specs
Total Installed Storage	8 TB
Drive Type	SATA III / 3.5" HDD (7200 rpm)
Read Speed	Maximum: 255 MB/s
Write Speed	Maximum: 255 MB/s
Parameters
Drive Type	SATA III / 3.5" HDD (7200 rpm)
Read Speed	Maximum: 255 MB/s
Write Speed	Maximum: 255 MB/s
Encryption Support	No
Mean Time Between Failures (MTBF)	2.0 Million Hours
Endurance (Total Bytes Written)	550 TB
Power Draw	10.1 W (Active) 7.8 W (Idle) 1.0 W (Standby)
Input Power	12 VDC at 2 A
General
Operating Conditions	32 to 97°F / 0 to 65°C
Operating Shock	70 G / 2.0 ms
Storage Conditions	-40 to 158°F / -40 to 70°C
Dimensions	5.79 x 4.01 x 1.03" / 146.99 x 101.85 x 26.11 mm
Weight	1.6 lb / 720 g
Packaging Info
Package Weight	1.88 lb
Box Dimensions (LxWxH)	9.2 x 7.1 x 3"

All-CMR (conventional magnetic recording) portfolio enables consistent, 24/7 performance, allowing users to access data virtually anytime, anywhere.

Up to a 550TB per year workload rating, a 2 million hours MTBF, and a limited 5-year warranty for a solid total cost of ownership (TCO).

Seagate provides complimentary Rescue Data Recovery Services for three years, giving users a hassle-free, zero-cost data recovery experience.

Helps protect data with prevention, intervention, and recovery recommendations to ensure peak system health.

Seagate's AgileArray technology provides dual-plane balancing, time-limited error recovery (TLER), and rotational vibration (RV) sensors to deliver top RAID performance in multi-bay environments.

Related Questions and Answers

Q: 1. Is it compatible with newly launched Synology DS923+ as it's not in the Synology compatibility list? It's compatible with many older models but why not the new one.

A: No, Synology has not qualified the Seagate 16TB IronWolf Pro 7200 rpm SATA III 3.5" Internal NAS HDD (CMR, OEM) BH #SEST16000NE0 at this time.

Q: 2. Can I check if this HDD has local warranty in Singapore?

A: You will need to check with the manufacturer to see what their repair capabilities are in your part of the world for the Seagate 22TB IronWolf Pro 7200 rpm SATA III 3.5" Internal NAS HDD (CMR, Retail, 4-Pack) BH #SE22000NT04K.

Q: 3. Is this drive compatible with QNAP TVS-672XT? Also, what is the model number?

A: Yes, the Seagate 18TB IronWolf Pro 7200 rpm SATA III Internal NAS HDD is compatible with the QNAP TVS-672XT. The model number is ST18000NEA00.

Q: 4. Can these be used as single drives? Planning on using an enclosure for 1 drive for field video editing. Are they tough for constant traveling?

A: This drive can be used as a stand alone drive.

Q: 5. Is it possible that these Ironwolf Pro drives will be added to the compatibility list for the Synology DS923+ at some future date? If so, any idea how long until they are confirmed? Or is it unlikely that these will be deemed compatible?

A: Synology does not test all drives from all manufacturers. You are welcome to reach out to them to request that they test the drive but we have found them to work perfectly fine with the Synology units.

Q: 6. What is (CMR) information on the product?

A: To explain what CMR is on this Seagate 18TB IronWolf Pro 7200 rpm SATA III Internal NAS HDD (CMR), I recommend seeing this explanation by Buffalo: https://www.buffalotech.com/blog/cmr-vs-smr-hard-drives-in-network-attached-storage-nas

Q: 7. It is compatible with Synology DS920+?

A: Yes. The Seagate IronWolf Pro series drives are recommended for use in NAS enclosures such as the Synology DS920+.

Q: 8. What does CMR information means?

A: "CMR" on this Seagate 18TB IronWolf Pro 7200 rpm SATA III Internal NAS HDD (CMR) would be Conventional Magnetic Recording.

Q: 9. Are these drives new or reconditioned?

A: All items on the site are new unless specifically marked used or refurbished.

Q: 10. Is it compatible with QNAP 473A?

A: This drive SEST16000NE0 is compatible with with a Qnap TS-473A.

Ryan	22/09/2024
[1.88 lb] This is a great hard drive for server use or file backups, which is using this for both. If I need to expand my storage needs these are the first I'd consider getting again. 5

Arun Kumar	16/09/2024
[9.2 x 7.1 x 3"] You won't go wrong with Seagate Wolf Pro as a best companion for your NAS 5

Anthony	14/09/2024
[8 TB] Great product and service. Always get great service when purchasing and no issues with products. 5

Brett	04/09/2024
[12 VDC at 2 A] These drives are fantastic for a NAS unit and B&H delivers a great product on time. 5

Bill	22/08/2024
[70 G / 2.0 ms] The SEAGATE 12 TB IRON WOLF and the very expert B&H advice team, very helpful dance partners in any and all Backup Shows cinema productions...always making the room perfectly available... 5

Hossam	08/08/2024
[1.88 lb] Fast delivery, well packaged and it works. I can't ask for more. 5

Morgan	29/07/2024
[9.2 x 7.1 x 3"] This just plugs straight into a Synology NAS. It gives a warning about it not being on the approved compatibility list, but works just fine. If you're ADDING this to a NAS which already has drives in it, remember that it can only add as much storage as the next-largest disk in the array. If you add one of these to an array containing 18TB disks, it can only add 18TB to total storage. If you add two, then they become backups for each other and you can use the full amount of space. This is also dependent on which RAID scheme you are using, but everyone with a Synology is probably using SHR mode. 5

Arun Kumar	29/05/2024
[70 G / 2.0 ms] I read several reviews and evaluated different products, you won't go wrong with Seagate Wolf Pro as a companion for your NAS!! 5

Michael	18/05/2024
[12 VDC at 2 A] These drives work great in my Synology 6 Bay Nas - 5

Jason	19/04/2024
[9.2 x 7.1 x 3"] I have been using IronWolf Pro drives in a couple NAS devices for over 5 years and they've been very reliable. These are new, but two sets of smaller capacity drives were rock solid. 5