Point Source Audio Series8 Omnidirectional Earworn Mic

Product Code: eq12832
Availability: In Stock

$999.00 $1,308.69

Qty

3 reviews Write a review

Description
Reviews (3)

The beige Point Source Audio Series8 Omnidirectional Earworn Micis designed for live sound reinforcement applications where ambient noise is low to moderate such as for concerts, plays, and public speaking. The microphone fits over either the subject's left or right ear and features a 360° bendable and unbreakable boom with an omnidirectional back electret microphone element. The IP57 waterproof rating helps prevent moisture, sweat, or makeup from interfering with the sound.

The microphone can handle a maximum SPL of 136 dB and offers a full-range frequency response of 20 to 20,000 Hz. The unit comes with a windscreen, clothing clip, storage box, 4' cable, and an interchangeable 3.5mm locking connector for Sennheiser EW Series systems.

Reversible Left or Right Ear Placement 360° Bendable & Unbreakable Boom IP57 Waterproof Protection Back Electret Condenser Capsule 20 to 20,000 Hz Frequency Response 136 dB Maximum SPL Interchangeable X-Connector System Includes Windscreen and Clothing Clip Includes Storage Box

Key Specs
Polar Pattern	Omnidirectional
Power Sources	Plug-In Power
Color	Beige
Microphone
Polar Pattern	Omnidirectional
Included Tone/Pattern Caps	No
Performance
Frequency Response	20 Hz to 20 kHz
Maximum SPL	136 dB
Sensitivity	-43 dB
Dynamic Range	104 dB
Connectivity
Analog Output	1x 1/8" / 3.5 mm TRS Male
Cable Length	4' / 1.2 m
Power
Power Sources	Plug-In Power
Operating Voltage	1 to 10 V (Plug-In Power)
Physical
Color	Beige
Environmental Resistance	Dust/Water-Resistant (IP57)
Weight	0.6 oz / 17 g
Packaging Info
Package Weight	0.38 lb
Box Dimensions (LxWxH)	7.3 x 5.7 x 1.1"

Related Questions and Answers

Q: 1. I would like to use this headset with Telex and Clear-com systems. Which headset and adapters should I get? Tks

A: The CM-i3 is available wired for TELEX or Clearcom systems. Please see the following link: http://bhpho.to/2fyyJS4 There is currently no adapter available from Telex to Clearcom. Adapters available can be found here. http://bhpho.to/2gD6ciS

Q: 2. can this work with any microphone with TA4F connector or is it only for Point Source mics?

A: The Point Source Audio CON is meant for use with PSA microphones only. Results with other brands will vary as they may have different wiring schemes, even if the connector is the same.

Q: 3. Does anyone have a photo of that install tool they offer?

A: CIEMs have the MMCX connector, you can simply snap them on. If they use a different type of connector then you'll want to remove and replace the whole cable assembly.

Q: 4. Because this is a condenser microphone, will it work with a Clear-Com RM-704 station?

A: Hello Scott, Thank you for your question. Our CM-i5 headset with condenser microphone can operate with systems that provide bias power. We checked with Clear-Com on the RM-704 and seems it does not supply the bias power. Many of their body-packs and the new FreeSpeak do offer the bias power. However, the CM-i3 with the dynamic mic should work with this station with no problem. Please come back to us if you have any other questions.

Q: 5. Do you make the point source omni 8 mic high sensitivity with the 2.5mm jack for the WM Lectrosonic transmitter

A: Hello Harrold, We do make this X-connector for the WM Lectosonics as a special order item. This item number would be CO-8WLh-XLEw. Please use this part no. when ordering, or contact us directly at sales@point-sourceaudio.com if you have additional questions.

Q: 6. Does this mic require any phantom power please?

A: This mic is designed with a connector for Sennheiser wireless transmitters, it does not require phantom power but does require voltage to operate 1 -10v which is provided by the transmitter.

Q: 7. will this work with a countryman mic??

A: It took me a while to find our old E6 to try. Yes, this headset will hold the countryman in place. The microphone is a bit looser a fit than the Point Source that it is made for and i didn't do exhaustive testing but it seems to me like it would hold up through a production. i took a picture but i don't see a way to attach it.

Q: 8. Does this work with the Riedel Bolero Wireless Intercom?

A: Yes, the Point Source Audio CM-i3-4F Intercom Headset with XLR-4F Connector is compatible with the Riedel Bolero Wireless Intercom.

Q: 9. I want to use my Sennheiser mics on my zoom N1. Because of the threaded collar, it doesn't fit perfectly into my Zoom N1. Does this cable convert the Sennheiser connector to a regular 3.5mm plug?

A: This adapter is specifically for Point Source mics to connect into Sennheiser wireless bodypack transmitters.

Q: 10. Will these work with Ultimate Ears custom in-ears?

A: Based on the information that I am seeing the Point Source Audio CM-i5-4F is not compatible with Ultimate Ears custom in-ear monitors.

Glenn D.	19/09/2024
[Beige] We have only used this once, but our congregation definitely noticed the difference. Everything was projected clearly with no noticeable distortion. Small enough to be inocuous, and not uncomfortable. The only concern that we have is if someone borrows it and unknowingly tries to bend the boom; not sure how adversely it may be affected. 5

Joew10	08/09/2024
[0.38 lb] Sounds great. Much better than lavalier mic. 5

Pudisgreat	29/07/2024
[0.38 lb] I bought this mic for my new Senn G3 wireless bodypack. I filmed an exercise video and the talent forgot they were even wearing it and I think it sounded great for the price. I was very happy with the size too...it is small and not very noticeable. .... It can only be used for the left ear as indicated. 5