Convert a digital SDI signal to analog and de-embed audio with this Gra-Vue Mio Mini 2-Channel SDI to Analog Converterfrom Gra-Vue. This converter features an SD-SDI BNC input that supports NTSC/PAL video and converts it to analog video for output via its CVBS BNC output. There is also an SD-SDI loop output for monitoring. The audio can also be extracted from the SDI input and sent via two 3-pin audio outputs. A dip switch on the side allows you to choose which tracks will be embedded and extracted.

Convert SD-SDI Signal to Analog    SDI Input, NTSC/PAL CVBS Output    SDI Loop Output, LED Indicator    2 x 3-Pin Analog Audio De-Embed Outputs

One BNC digital video input that supports NTSC 480i59.94 and 576i50 PAL

Two 3-pin analog audio outputs

A dip switch allows you to select which audio track will be embedded or de-embedded

Real-time LED indicator for signal and power status

BNC SD-SDI loop output

Related Questions and Answers

Q: 1. how long will be the RG6 cable when analog signal is converted going to the video switcher?

A: With RG6, about 300 feet. Much longer, you should be using fiber...

Q: 2. I just bought this Analog to SDI,for Sony nxcam hxr-nx3/1 to BM ATEM. Can anyone help how to setup up?

A: Not much to set up. As I recall there are some switches on it to set as. I connected it and flipped the switches until I stumbled onto the right combination.

Q: 3. Can I use this to go from hd sdi drone a video switcher preview output to a rd connection and split it to send a video signal to multiple screens

A: This will make an analog video signal from SDI. Not completely sure of your workflow.

Q: 4. I want the "look" of the dvx100a while shooting with modern iPhones. Can this be used to that effect in any way possible? How?

A: The Blackmagic Design Mini Converter SDI to Analog is for cable and signal compatibility for video hardware solutions. It will not produce the look of an older camera through its conversion.

Q: 5. Hi. I have an old professional VHS camera that has BNC video output. So to capture the video to my Mac book, first I have to use this analog-sdi converter, after I have to connect it to the Design UltraStudio Mini Recorder, and after connect all this to laptop? And what’s the difference if I will use Elgato USB Analog Video Capture Device Instead of all this, connected to the camera via bnc-s-video cable ( it passes the color) and connected to laptop via usb? Thank you very much for your answer!

A: If you use the Blackmagic Design Mini Converter Analog to SDI, it will convert the analog signal to digital and then the Blackmagic UltraStudio Mini Recorder could be used. However, the Elgato USB analog video capture device could be used as a more direct solution to convert an analog source. The only major advantage in using the Blackmagic solution would be to use Blackmagic's Media Express software (free download) to encode it into a variety of formats, such as Apple Prores.

Q: 6. Is there a way to go from VGA to BNC male for this? Would RGBHV work if I just didn't use the H & V cables?

A: Most likely not. RGB does not carry sync, so you would need H and V inputs. You will need a VGA to SDI scaler. Hope this aswers the question

Q: 7. How many analog signals in the input and SDI outputs?

A: There is one input, and two SDI outputs.

Q: 8. anyone know if this is compatible with an ultrastudio mini recorder? need to convert N64 composite for streaming via OBS. Thx!

A: This may not work if the signal is not NTSC broadcast standard frequency. We do not have direct experience.

Q: 9. Will this convert an NTSC composite video to SDI?

A: Yes

Q: 10. If I connect component video and analog audio to this converter and run SDI cable (RG6), can I plug the SDI cable directly into my HD TV at the destination (without further conversions)?

A: As long as the source is producing a signal with resolution and frame rates compatible with Blackmagic Mini Converter Analog to SDI.