The black Point Source Audio CO-3 Earworn Microphone offers a cost-effective solution for hands-free speech applications without sacrificing sound quality. The microphone features a low-profile rigid boom with a fixed length, and ear-loop designed to mount onto the left ear.

Its omnidirectional microphone capsule provides a generous pickup area and is most effective in minimizing noise caused by breathing, popping, wind and general movement. The CO-3 is optimized for speech and is an ideal solution for houses-of-worship, presentations, lectures and anywhere a hands-free, high-quality, low-profile microphone is necessary.

Optimized for Speech    TA4F Connector    For Telex Wireless Transmitters    Omnidirectional Polar Pattern    Left Ear Placement    Low-Profile Design

The omnidirectional microphone capsule provides a generous pickup area and is most effective in minimizing noise caused by breathing, popping, wind and general movement.

This version of the CO-3 features a TA4F connection for attaching to compatible Telex wireless transmitters.

A low-profile rigid boom with a fixed length and ear-loop is designed to mount onto the left ear. The entire structure is designed to provide an unobtrusive, low-profile for stage applications.

Related Questions and Answers

Q: 1. Will this mic work work with a TASCAM DR-40? And do I need any other accessories like xlr cable to use it?

A: This mic will connect directly to a TASCAM DR-40 via a standard XLR cable: The Kopul Studio Elite 4000 Series XLR M to XLR F Microphone Cable (6') is a studio-quality cable for connecting mics to mixers, preamps, audio interfaces and recorders; or to be used in any other application where XLR connectivity is required. The cable is engineered to be both quiet and durable, and is well-suited for critical recording and broadcast situations. B&H# KOM4006. http://bhpho.to/1qfqgR7

Q: 2. Can this mic be used interchangeably with various transmitter brands?

A: Yes, it can! Each mic comes with one X-Connector. Additional X-Connectors for other wireless brands can be purchased separately.

Q: 3. This version CO-3 features a 1/8 (3.5mm) mini connection,,.... is it a locking connection like on all sennheiser mics?

A: yes this has a threaded collar for secured insertion into the body pac

Q: 4. Will this work with a Canon 600d (Australia) - does it require a third party audio mixer for optimal sound recording?

A: To connect directly to the external mic input of your camera an XLR cable and an impedance matching adapter will be required: The Kopul LMT100 cable simply enables a microphone or mic-level device to be input into a high-impedance 3.5mm mini input found on DSLRs, camcorders, and other devices. It is 1.5' long and has a 3-pin XLR female connector on one end and a standard 3.5mm mini plug on the other. It is designed for use with mono microphones. B&H# KOLMT100.For the best sound (lowest noise floor) a DSLR adapter interface is the way to go:The BeachTek DXA-SLR PRO HDSLR Audio Adapter is designed to enhance audio quality with virtually any HDSLR camera by providing high quality XLR inputs, AGC disabling, built-in limiting, headphone monitoring, comprehensive metering and more. Connect up to two microphones and provide 12 or 48V phantom power to professional condenser microphones. B&H # BEDXASLRPRO.

Q: 5. Is the connector screw on (lockable)?

A: Hello John, This microphone has a hardwired termination of the connector. Hope that helps!

Q: 6. As I understand, the mic gets the power from the Tascam phantom +48V OR from the supplied power module. Please clarify. Can I plug the mic directly into Tascam XLR or I need an additional adapter? Thanks in advance.

A: The phantom power comes from the included power adapter. You can plug the XLR otput into any device that accepts a mic level signal without needing additional power.

Q: 7. Will this work with the 3 or 4 pin connector or 3.5mm?

A: Hi Mark! This mic model EO-8WL-XAT-BE has an interchangeable X-Connector compatible with the Audio-Technica (XAT) wireless system. If you wish to switch out to other wireless brands, you simply swap out for another X-Connector which can be purchased separately. For example, XSH (for Shure) or XSE (for Sennheiser.)

Q: 8. is it stereo or mono?

A: I really don't know but the sound is great.Sorry

Q: 9. Will this headset work on the Sony packs?

A: If it doesn't say your brand, then I wouldn't buy it. This one is made for Sennheiser.

Q: 10. Will this microphone easily fit into the Pelican 1020 Micro Case?

A: Yes, that is a good fit for it.