The Dual XLR Male to TA5M Female Audio Cable from DigitalFoto Solution Limited is designed to work with the Zaxcom QRX200. The 3.2' long cable features two 3-pin XLR male right-angle connectors on one end and a TA5F Mini XLR female connector on the other.

For Zaxcom QRX200    Cable Length: 3.2'    2 x XLR Male Right-Angle Connectors    1 x TA5F Mini XLR Female Connector

Related Questions and Answers

Q: 1. Would this work with my mm-bsm-8 binaural headphones and MixPre-3 II to enable use of the kashmir XLR preamps instead of the aux-in one?

A: No, the ALZO adapter will not work because the MM-BSM-8 binaural headphones require 1.5 to 10 VDC plug-in power and the XLR inputs on the MixPre-3 II can supply 48V phantom power which is way more than needed and will likely damage the mic. The mic is designed to be used with the 3.5mm stereo plug. We have not tested it with adapters to confirm whether there will be issues with phasing and/or noise created by using a Y-type adapter, but it is very possible that could happen. If did want to try using a stereo 3.5mm Y-cable, you would need to use two XLR adapters (one for each input) like the Rode VXLR+ (B&H # ROVXLRP) which has a built-in power converter that converts phantom power to plug-in power. For the Y-adapter, you can try the Hosa Technology Stereo 3.5mm Female to Dual Mono 3.5mm Male Airline Adapter (B&H #HOYCSMF2MMRA) which splits stereo to two individual mono outputs. Again, I do want to mention that we have not tested this setup to confirm whether it will work properly or if it will sound good. We recommend connecting the mic to a 3.5mm TRS input for the proper stereo imaging it was designed to create.

Q: 2. If I am wanting to connect a Sennheiser Lavalier 3.5mm directly to my Zoom F3, should I get the VXLR or VXLR+?

A: The Sennheiser lavalier microphone requires a small amount of voltage in order to function, so you will want to use the RODE VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter (B&H # ROVXLRP), which will allow you to use phantom power from the XLR mic input on the Zoom F3 Portable Field Recorder and then convert it to the proper amount of plug-in power that the mic requires. The RODE VXLR 3.5mm TRS Female to XLR Male Adapter (B&H # ROVXLR) will only convert the plug on the microphone from 3.5mm to XLR, but it will not convert phantom power to plug-in power.

Q: 3. Will this work with the Shure VP83? I believe the Shure is mono...

A: Yes the Rode VXLR - Mono Mini-Jack to XLR Converter will work with the mono Shure VP83.

Q: 4. Does this adapter covert phantom power to plugin power?

A: This particular adapter will not convert Phantom to Plug-in power, but the Rode VXLR Plus will: https://www.bhphotovideo.com/c/product/1358231-REG/rode_vxlr_mini_jack_to_xlr_adaptor.html

Q: 5. Will this allow a Zoom H6 line out signal to be sent into both XLR ports of the Ursa Mini Pro camera?

A: Yes, the Hosa stereo mini to dual XLR cable can be used to send the line out audio from a Zoom H6 to the XLR inputs on the Ursa Mini Pro camera. Since you are sending a line level signal, make sure that you set the camera inputs for line level audio.

Q: 6. Will this work with the Rode SmartLav+?

A: No as the smartlav+ has a TRRS connection. The VXLR is a TRS to XLR adaptor only.

Q: 7. I'm assuming (since it was listed as an accessory to the Filmmaker Kit) this product will allow you to use the Lavalier included with the Filmmaker Kit as a hardwired mic via an XLR cable. If so, will this adapter allow +48V phantom power to be supplied to the Lavalier?

A: No, this does not supply phantom power.

Q: 8. Is this Adapter OK to use with a Rode Video Mic Go Shotgun connecting to a Tascam 70D for phantom power? If it is what should the setting on the Tascam 70D be 24v or 48v?

A: No. You should not send phantom power to the Rode Video Mic. It operates on its own internal battery, which is charged via the USB cable.

Q: 9. HOW LONG IS THIS CABLE? IS THIS IN METER?

A: 0.0381 METERS

Q: 10. Hello, I want to record speeches in a wedding. My setting is a back up audio. I want to connect my Rode wireless go II recorder to the dj console while guest speech using the Dj microphone. Will this adapter work for my needs.

A: Yes. The following adapter will get plugged into the events mixing board.