The Dual XLR Male to TA5M Female Audio Cable from DigitalFoto Solution Limited is designed to work with the Zaxcom QRX200. The 7.8" long cable features two 3-pin XLR male right-angle connectors on one end and a TA5F Mini XLR female connector on the other.

For Zaxcom QRX200    Cable Length: 7.8"    2 x XLR Male Right-Angle Connectors    1 x TA5F Mini XLR Female Connector

Related Questions and Answers

Q: 1. Phantom power. Can my mixing board power my boundary microphone using this adapter? I'm using a Mackie 8 channel mixer with Olympus boundary mics.

A: So that we may best assist you, please contact us by live chat, phone or email, proaudio@bhphoto.com.

Q: 2. If I am wanting to connect a Sennheiser Lavalier 3.5mm directly to my Zoom F3, should I get the VXLR or VXLR+?

A: The Sennheiser lavalier microphone requires a small amount of voltage in order to function, so you will want to use the RODE VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter (B&H # ROVXLRP), which will allow you to use phantom power from the XLR mic input on the Zoom F3 Portable Field Recorder and then convert it to the proper amount of plug-in power that the mic requires. The RODE VXLR 3.5mm TRS Female to XLR Male Adapter (B&H # ROVXLR) will only convert the plug on the microphone from 3.5mm to XLR, but it will not convert phantom power to plug-in power.

Q: 3. I'm assuming (since it was listed as an accessory to the Filmmaker Kit) this product will allow you to use the Lavalier included with the Filmmaker Kit as a hardwired mic via an XLR cable. If so, will this adapter allow +48V phantom power to be supplied to the Lavalier?

A: No, this does not supply phantom power.

Q: 4. Can I connect a JBL Lifestyle Can I plug in my JBL Quantum 300 Gaming headset to this adapter and plug it into an audio interface or mixer?

A: So that we may properly assist you, please contact via phone, email or live chat.

Q: 5. Will this work with the Rode SmartLav+?

A: No as the smartlav+ has a TRRS connection. The VXLR is a TRS to XLR adaptor only.

Q: 6. Is this Adapter OK to use with a Rode Video Mic Go Shotgun connecting to a Tascam 70D for phantom power? If it is what should the setting on the Tascam 70D be 24v or 48v?

A: No. You should not send phantom power to the Rode Video Mic. It operates on its own internal battery, which is charged via the USB cable.

Q: 7. can this be used with microphones requiring plug in power? Not 48v phantom, but 1-3v?

A: This cable is intended to be used with dynamic mics and self-powered (battery) condenser mics.

Q: 8. As to length: what is the spread-distance of the two XLRs from the Y-junction of the wires?

A: The split is not glued together, so, it's roughly half the length of the cable (7.5'). If you extended each line as far as it could go, you could get 15' between the left and the right xlr end. I ended up having to tape the split together to make the cable more manageable

Q: 9. If I connect the 3.8mm to a Hollyland Lark Max, and the XLRs into an Ursa Mini Pro, will it split the left and right signals?

A: If the Hollyland Lark Max receiver is set to stereo mode, then the ALZO 3.5mm Female to Dual XLR Male Stereo Microphone Adapter Cord will carry left and right signals on the first and second XLR outputs respectively. If it is set to mono mode, the same mixed signal will be carried on both XLR connectors.

Q: 10. Would this work with the Rode VideoMic NTG TRRS output (allowing you to record the signal in addition to the safety track separately) with any mixer with XLR inputs?

A: The adapter has a female 3.5mm TRS connector, so to avoid the possibility of any issues with compatibility, it would be better to use a TRS cable instead of the TRRS cable since the auto-sensing feature may not work properly when connecting to an adapter rather than directly to a mic input. For a standard TRS cable, you could use the Rode SC2 Right-Angle 3.5mm TRS Coiled Patch Cable (B&H # ROSC2). As an easier solution, you can use a single Y-cable with 3.5mm TRS and left/right XLR connectors like the Kopul Y-Cable with 1/8" TRS Stereo Mini to 2 XLR Male Connectors - 3' (B&H # KOSMYCM2XM03) or Hosa Technology Pro Stereo Breakout Cable - 3.5mm Stereo Mini to Dual 3-Pin XLR Male - 3' (B&H # HOHMX003Y) or Hosa Technology Stereo Mini-Phone (3.5mm) Male to 2 XLR Male Y-Cable - 6.6' (B&H # HOYCSMM2XM6). All of the Y-cables are available in longer lengths. The single Y-cable ensures a proper left/right split and helps to avoid introducing noise into the signal.