The Antari Z-1000 III Fog Machine adds fog to nightclubs, bars, bowling alleys, and event centers, as well as mobile entertainers and DJs, and anyone looking to add a dry and consistent smoky atmosphere to their events.This high-performance, entry-level fogger features a UNICORE heater with thermal cutoff technology to prevent overheating. A built-in voltage protection module signals if you're plugged into the wrong output voltage and increases the output volume by 10%.

Use the LCD screen to set the unit up for the type of fog fluid you're using, with two options to choose from. The built-in tank holds 1.7 liters of fluid and consumes up to 60mL per minute. Use the hanging bracket to mount the machine onto a truss or similar hardware. Control the Antari Z-1000 III via its single DMX channel or use the included Z-10 wired remote. The Z-50 wireless remote control is available separately.

UNICORE Heater with Thermal Cutoff    DMX Connector    6-Minute Warm-Up Time    Large 1.7L Tank    Uses 2 Different Fluid Options    Includes Wired Remote

• 1000W fog machine provides smooth, dry fog
• UNICORE heater with thermal cutoff technology
• LCD screen
• Choose from two different types of fog fluid
• One DMX channel
• 1.7L tank
• 60mL per minute fluid consumption
• 6-minute warm-up time
• Includes hanging bracket and wired remote
• Built-in voltage protection module triggers increased output

Related Questions and Answers

Q: 1. What is the difference between the hanging mount and the stand mount version of this instrument?

A: The ARRI T1 1000W Location Fresnel with Stand Mount (120-240 VAC, Black) and Hanging mount are almost the same. The Hanging mount the yoke is set on top so it hangs correct from the ceiling. And stand mount the yoke is on the bottom so it can be positioned on a light stand.

Q: 2. What diameter should the Filter be cut to fit in the filter holders?

A: The ARRI T1 Fresnel lens is 5.9 inches. But with gels it is best to attach them to the outside of the barndoor so there is air flow. 1000 watts does get hot and will melt gels.

Q: 3. Do I need a rack shelf to mount? I am not sure whether the rack ears are sturdy enough.

A: The CyberPower 1000W PFC Sinewave Rackmount UPS BH #CY1500PFCRM2 was designed to be rack mounted.

Q: 4. Does the fan operate 100% of the time? Is there any audible noise emitted when not in battery mode?

A: The fan noise of the CyberPower 1000W PFC Sinewave Rackmount UPS (B&H # CY1500PFCRM2) varies depending on usage and surroundings.

Q: 5. Is this product compatible with the Faze Stream 700 by Eliminator Lighting? Their remote is a tc-4

A: I contacted Eliminator Lighting with your inquiry. They state that they do not believe the Faze Stream 700 would work with the Antari Fog Machine HC-1 Timer Remote for HZ-100 / HZ-350 / HZ-400 Haze Machine. They checked with their warehouse and both the Faze Stream 700 and the replacement remote are discontinued. Due to the low demand they have zero replacement remotes in stock. What I would recommend would be to purchase the remote and try it with your Faze Stream 700. If it does not work, you have 30 days from the original purchase date to return the remote for an exchange or refund. The link to our Return link is listed below. https://bhpho.to/2bxrYlG

Q: 6. Can I use a 5 pin to 3 pin adapter without issue?

A: No, a 3-pin adapter will not work properly with the ENTTEC DMX USB Pro.

Q: 7. does this come with a 4-leaf barndoor?

A: No, the ARRI T1 1000W Location Fresnel with Hanging Mount (120-240 VAC) does not come with a barn door. The barn door for that is, https://bhpho.to/3i4mkac .

Q: 8. Does this come with scrim set?

A: The light does not come with a scrim kit.

Q: 9. Is it Mac compatible?

A: Yes, the SoundSwitch Micro-DMX Interface is bot Mac and PC compatable.

Q: 10. What kind of sine wave is this when it is on battery mode?

A: The CyberPower 1000W PFC Sinewave Rackmount UPS BH #CY1500PFCRM2 specifies in the manual it is a sinewave output.