This dual-purpose Benro Aureole ND/PL Hybrid Filter 6-Stopcombines the benefits of a neutral density filter with a polarizer filter to create sharp, high-quality images with proper exposure. The neutral density reduces light from hitting your camera's sensor by 6-stops, while the polarizer filter reduces glare from naturally reflective surfaces like water. This makes the filter best utilized in very bright, sunny conditions. Multicoated optical glass makes the surface water resistant and oilproof while maintaining natural color reproduction.

1.8 Optical Density    Reduces Glare    Neutral Density and Polarizer Filter    Multicoated Optical Glass

Related Questions and Answers

Q: 1. I have a Batis 25mm. will this filter fit the lens, and also, will the original lens cap fit on top of this filter?

A: Yes, this will fit the 67mm filter threads of the ZEISS Batis 25mm f/2 Lens for Sony E. However, since this filter is made wider so as to avoid vignetting, you will need a 72mm lens cap. Here is a quality one to match your lens. B+W 72mm Pro Snap-On Lens Cap MFR #65-1065134 • BH #BWLC72

Q: 2. Im use canon ef 16-35 f2.8 iii can use original lens cap? and can attach original lens hood?

A: The front thread is a larger 86mm thread so the original 82mm hood and cap that came with the lens you would use this on will not work with this filter no.

Q: 3. Will it fit inside of the Canon 200mm f/2?

A: If your camera lens has a diameter of 52mm, then it should fit....The lens mm diameter is compatible with any filter with the same mm diameter it claims to have. Hope this helps!

Q: 4. How thick is this filter?

A: I don't have this filter. Not sure why I was asked by BH to answer the question. Sorry.

Q: 5. I have a UV protective filter, Can i use it in addition to a Polarize filter? Stack all 3?

A: It's typically advised you don't stack filters due to diminishing transmission and risk of unwanted glare/artifacts/color-shifting/cross-polarization.

Q: 6. Is this a hard stop filter where it goes from 2 to 5 and then it can't proceed further ?

A: The rotation of the filter is smooth. It does not click as you rotate it. It also stops rotating once you reach the maximum or minimum density.

Q: 7. is this filter compatible with nisi v5 100mm system?

A: Yes the B+W 100 x 100mm XS-Pro MRC-Nano 803 Solid Neutral Density 0.9 Filter is compatible with the NiSi V5 Pro 100mm Filter Holder Kit at 100mm x 100mm, and 2mm thick.

Q: 8. Can someone explain the markings on the filter? Thanks

A: The markings are 1/2 stop increments. This helps you determine the proper exposure.

Q: 9. 82mm. Does this filter have "front threads", for instance to screw on a lens hood?

A: The following system offer 86mm Front Filter Threads.

Q: 10. with an ultra-wide angle lens (i.e. Canon 16-35mm F4L with a full frame camera), do you get the dreaded X show up and if so at what density does it show up?

A: The X you can sometimes pick up in the image with a variable ND filter is caused most of the time by variable ND filters that go over 7-8 stops and lower quality ones.The B+W filter is fine. The one thing you might pick up is when set to the widest setting on that lens, 16mm you might pick up some vignette. And that is going to happen with that lens with most filters because of how wide it can go. The filter is designed with a thinner frame so it should be somewhat minimal.