The Royer R-10 Hot Rod 25th Anniversary Limited-Edition Studio/Live Ribbon Microphone is designed to deliver smooth, full-range frequency reproduction and high SPL handling for musicians, recording engineers, and live sound mixers in home studios, recording facilities, and live stage applications. To celebrate this passive ribbon mic's 25th anniversary, this limited-edition version features a custom transformer that delivers an additional 5 dB of output gain over the standard version, providing a punchier feel with an increased low-midrange focus. Handbuilt in California, the mic features a high maximum SPL of 135 dB at 50 Hz and 160 dB at 1 kHz, and a wide, unhyped frequency response of 30 Hz to 15 kHz. The R-10 utilizes a standard XLR 3-pin output and does not require phantom power.

The microphone's figure-8 polar pattern allows pickup of sounds from the front and back of the mic, while maximizing sound rejection from both sides. This provides a directional focus in front of the microphone and allows room reflections behind the mic to be captured. The 2.5-micron aluminum ribbon element is protected from vibrations via an internal shockmount. A three-layer windscreen system tames plosives, strong bursts of air, and proximity-induced bass buildup. The wiring of the ribbon results in humbucking, which aids in preventing noise produced through electromagnetic interference. The R-10 includes a microphone holder, mic sock, and carrying case.

Figure-8 Polar Pattern    Custom Transformer with +5 dB More Level    Handles Loud Sources up to 160 dB SPL    2.5-Micron Aluminum Ribbon    30 Hz to 15 kHz Frequency Response    3-Layer Windscreen System    Internal Shockmount System    Wired to Reject Electromagnetic Noise    Includes Holder, Sock, and Carrying Case    Handbuilt in the USA

• Custom transformer with +5 dB more output gain than traditional R-10
• Delivers a punchier sonic profile with more pronounced lower midrange focus
• Black-accented trim for distinctive appearance
• Figure-8 polar pattern picks up sound from the front and back of the mic and rejects sounds from the sides
• High maximum SPL of 160 dB allows use on loud sources
• 2.5-micron aluminum ribbon constructed with Royer's patented direct-corrugation process
• 30 Hz to 15 kHz frequency response for full range without harsh high frequencies
• Built-in windscreen system utilizes three layers to protect against air blasts and plosives and reduces proximity effect
• Internal shockmount isolates the ribbon from vibration and increases its durability
• Open grille design reduces standing waves and comb-filtering effects
• Custom-designed transformer minimizes saturation even at high SPLs
• Wired for humbucking to reject electromagnetically induced noise
• Includes microphone holder, mic sock, and carrying case
• Handbuilt in Burbank, California

• Close miking in the studio and on live stages
• Electric and acoustic guitars
• Drum overheads, kick drum (see manual for position), room miking
• Percussion instruments
• Brass, horn sections
• Strings - solo and sections
• Acoustic piano
• Vocals

Related Questions and Answers

Q: 1. To use a DSLR, do you need the Celestron SLR adapter and a T-ring or something more?

A: The Sky-Watcher SkyMax 127 Virtuoso GTi Telescope cannot take the weight of a DSLR camera.

Q: 2. I am 5.2 High does this strap fit for me? Or is too long?

A: This is adjustable. I really would not worry that it will be too long.

Q: 3. is this compatible with Meeting Owl Pro?

A: The Owl Labs Lock Adapter for Meeting Owl 3 BH #OWLAMO3 is not compatible with the Meeting Owl Pro.

Q: 4. I just received my strap and want to attach it to my Canon 100-400 mm lens, not the 7D II body. Attaching to body puts too much torque on lens mount. Bit I need to attach to the tripod mount because the tapped hole in the lens is not 1/4-20. Are there adapters so that I don’t need to use the tripod mount?

A: The tap on the lens is a 1/4-20, you can in fact screw this into the bottom of the foot on the Canon 100-400mm lens. If you need to have the strap screwed into the foot and don't want to have to take it off every time you put it onto a tripod, you could use something along the lines of this, KIKLP450V2, where you would screw this plate onto the bottom of the collar on your 100-400, screw the Black Rapids plate into the 1/4-20 on the plate near the back which would leave the front of the plate open to be mounted on a tripod.

Q: 5. Would this fit a Samsung Galaxy S8+?

A: The Moondog Labs Smartphone Hood (XL) BH #MOSHXL is made for phones that are more than 6" in height.

Q: 6. Can this be used to clean sticky residue from tapes on the lavs?

A: The Goby Labs Sanitizer Spray for Microphones would not be recommended to remove adhesive residue from lavaliers or other audio cables, as it is designed primarily for sanitization. Products such as "Goo Gone", which are typically found in hardware stores, can serve the purpose of adhesive removal well.

Q: 7. Does it have 48v per output so 48v for 1 and 2

A: +48v phantom power per input.

Q: 8. I utilize Zoom Room Video Conferencing for my training sessions. Is the Owl compatible and will it project the trainees in the room to the Zoom system so the online trainees can see and better hear the in class participants?

A: Yes, this will work with Zoom just fine.

Q: 9. Does it work with iPads?

A: No, this is compatible with Windows and Mac OS only.

Q: 10. Can the scope fit on a tripod and what camera would be usable with the scope?

A: The Sky-Watcher SkyMax 127 Virtuoso GTi Telescope (25th Anniversary Edition), BH # SKS21225, is adaptable to standard photographic tripods. Use this adapter to attach a DSLR: Celestron SLR (35mm OR Digital) Camera Adapter (B&H # CETA1.250) The Canon EOS Rebel SL3 DSLR Camera with 18-55mm Lens (Black), B&H # CAEDRSL3BK, would work with the above tripod and adapter. https://bhpho.to/3YD73BW .