The 4-Pin LEMO to BNC Timecode Synchronization Cable for RED EPIC from DigitalFoto Solution Limited is a timecode synchronization designed to work with the RED EPIC camera. The 1.6' long cable features a 4-pin LEMO connector on one end and a BNC right-angle connector on the other.

For RED EPIC Camera    Cable Length: 1.6'    1 x 4-Pin LEMO Connector    1 x BNC Right-Angle Connector

Related Questions and Answers

Q: 1. Can I plug this cable in to a ZV-E1F?

A: Technically yes, you could plug the TRS connector of the Deity Microphones C15 Right-Angle Locking 3.5mm TRS to Right-Angle BNC Timecode Cable into the Sony ZV-E1's 3.5mm audio input, but this won't accomplish anything. The 3.5mm tip of the cable is meant to connect to the Deity TC-1's timecode output, and the BNC connector goes into a camera's BNC timecode input. The ZV-E1 doesn't have a BNC timecode input, or any timecode input at all.

Q: 2. Can this cable be used to connect a Nano lockit to the Komodo?

A: Yes, the Wooden Camera RED KOMODO Timecode I/O Cable (12", Inward Right Angle) would carry time code from a Ambient Recording NanoLockit Miniature Timecode Synchronizer to a RED komodo.

Q: 3. Will this mount support heavier PL mount lenses like the Sony Cine Alta Primes or RED Pro Primes?

A: This is a very solid PL mount, it will support heavier lenses. However it is never a bad idea to add a lens support unit to your rig, these will give you even great stability and assist you if you are using very large, heavy lenses.

Q: 4. Can I use my zoom f8 as master and use this cable to jam sync timecode into the TC-1?

A: Yes, the Deity TC-1 can be jammed with the C15 Right-Angle Locking 3.5mm TRS to Right-Angle BNC Timecode Cable.

Q: 5. Can I use this to jam the blackmagic video assist 5 inch 12g?

A: No, the Deity Microphones C15 Right-Angle Locking 3.5mm TRS to Right-Angle BNC Timecode Cable is intended for use with the Deity Microphones TC-1 Wireless Timecode Generator Box (B&H # DEDTT0272D80) which uses a locking 3.5mm connector. The BNC connector would be for connection to the timecode input on the device that you are connecting to. The Blackmagic Design Video Assist 5" 12G-SDI/HDMI HDR Recording Monitor has a non-locking 3.5mm audio input, so if you are jamming timecode to the audio input you need a cable that has a non-locking 3.5mm TRS connector. If you are feeding timecode from a device with BNC timecode output, you can use the Tentacle Sync Tentacle to BNC Cable - Right-Angle, 16" (B&H # TEC08) or the Tentacle Sync Tentacle to BNC Cable - Straight, 16" (B&H # TEC06).

Q: 6. Does this cable fit in the plastic bracket provided with a Tentacle Sync mkii?

A: The Kondor Blue BNC to 3.5mm Right-Angle Timecode Cable for Broadcast Cameras (10") does not fit the plastic bracket provided with a Tentacle Sync mkii.

Q: 7. Can i use this red-gemini?

A: Yes, this works perfect with the RED Gemini.

Q: 8. Would this cable connect my 27 iMac 2011 model with a 15 Mac Book Pro 2016 model?

A: Yes it will. You should turn off one, connect them, and then start it while pressing t and it will enter Target mode (it will show the Thunderbolt icon). It will mount as an external drive in the other computer.Once you are done, you eject the drive and turn off the machine by pressing the power button. Then, disconnect both machines.:)

Q: 9. Will this cable work with the RED Touch Pro 5.0?

A: I use it with a 7 and works great. Can't say for certain with the 5.0, but educated guess says yes.

Q: 10. Is this adapter RED approved?

A: No, but that's because RED doesn't approve anything really. It is a fine adaptor. It is cheaper because it is a dumb mount (no electronics). it's a great mount and works perfectly!