Honeywell Genesis 18 Awg Rg6 Quad-Shield Coaxial Cable

Honeywell Genesis 18 Awg Rg6 Quad-shield Coaxial Cable

Product Code: eq12972
Availability: In Stock

$215.85 $280.61

Qty

10 reviews Write a review

Description
Reviews (10)

The 500' long White Genesis Series 18 AWG RG6/U QUAD-Shielded Broadband Coaxial Cable from Honeywell comes packaged in a pull box. It is a broadband and digital coaxial cable, tested for high standards to assure high performance in high-end home theater installations, incorporating HDTV and digital video. The cable has a foil shielding that protects signal transmission from EMI and RFI interference and blocks lower frequency interference.

General Purpose CL2-Listed

Parameters
Gauge	18 AWG
Conductor	Copper-clad steel center 30 Ω/1,000'
Insulation	Nitrogen-injected foam polyethylene dielectric
Shield	100% coverage aluminum foil / 60% aluminum braid 100% coverage aluminum foil / 40% aluminum braid
Jacket	PVC
Style	RG6/U
Minimum Bend Radius	3.0" (76.2 mm)
Frequency	Sweep Frequency: 3 GHz
Nominal Impedance	75 Ω
Resistance	10.9 Ω/m at 20°C
Attenuation	Minimum SRL: 20 dB 0.7 dB/100' at 5 MHz 1.5 dB/100' at 55 MHz 2.8 dB/100' at 211 MHz 3.9 dB/100' at 400 MHz 4.4 dB/100' at 500 MHz 4.9 dB/100' at 600 MHz 5.5 dB/100' at 750 MHz 6.5 dB/100' at 1,000 MHz Minimum SRL: 15 dB 8.1 dB/100' at 1,500 MHz 8.9 dB/100' at 1,800 MHz 9.9 dB/100' at 2,200 MHz 10.3 dB/100' at 2,400 MHz 11.7 dB/100' at 3,000 MHz
Pulling Tension	Maximum: 19.0 lb (8.6 kg) Recommended: 14.25 lb (6.46 kg)
Temperature Rating	-4 to 167°F (-20 to 75°C)
Voltage Rating	300 V
Diameter	Dielectric: 0.18" (4.57 mm) Nominal Outer Diameter: 0.298" (7.569 mm)
Length	500.0' (152.4 m)
Packaging Info
Package Weight	16.75 lb
Box Dimensions (LxWxH)	16.4 x 15.7 x 11.7"

CCS (Copper Clad Steel)

High durability and strength

Common for broadband applications, including CATV / MATV and HDTV

Related Questions and Answers

Q: 1. Will this cord work with the Paul C. Buff Alien Bee strobe?

A: Yes, the 18 AWG Universal Power Cord is compatible with the Paul C. Buff Alien Bee strobe.

Q: 2. There is a comment that the reels are consistently coming up short in length. Sometimes as much as 100 feet. Has this issue been addressed?

A: Didn.t happen to my order.

Q: 3. is this support 3 g sdi and what is the max length?

A: Yes, the Belden 1694A RG6 Low Loss Serial Digital Coaxial Cable (500', Black) supports 3G signals and can allow up to 255 feet for 3G-SDI.

Q: 4. is this cable recommended to be buried underground in conduit that may fill with water?

A: This cable is not recommended to be buried underground in a conduit that may fill with water.

Q: 5. will this work 3g-sdi ?

A: Yes, this cable is rated for 3G-SDI.

Q: 6. Does this work with a photogenic 1250dr strobe head?

A: This is the recommended AC line cord: Photogenic AC Line Cord - 110V, for PL and PM Series MFR #937467 • BH #PHPL06LCQ: https://bhpho.to/2YIi0WS This cable should work also: Watson 18 AWG Universal Power Cord (NEMA 5-15P to IEC C13, Black, 6') • BH #WAPC186B: https://bhpho.to/2KyRRkM

Q: 7. This cable is listed by Blackmagic as being tested for carrying a 12G signal up to 50 meters. Can you confirm this is possible? I can't find any information in the technical specifications that mentions using this for a 12G signal. Thanks!

A: This cable is unfortunately not capable of 12G, here is an alternative. The Belden 12G-SDI 75-Ohm UHD 4K Mini Coax Video Cable https://www.bhphotovideo.com/c/product/1555368-REG/belden_4855r_1000_blk_12g_sdi_75_ohm_4k.html/qa

Q: 8. Would this work in commercial 70 volt installations?

A: In 70 volt applications it is recommended to use 16 gauge or lower dependent on distance. An 18 gauge cable such as this is recommended for home theater applications.

Q: 9. Hi team. I would like to know the lenght of this cable. I see 1000', but is not clear the units. Its meters? Feets? inches? Tks

A: The Belden 4694R RG6 12G-SDI 4K UHD 18 AWG Cable (1000', White) is 1000 feet in length.

Q: 10. Can this be used on a 220 volt device and outlet?

A: The maximum voltage that the Watson 18 AWG Universal Power Cord (NEMA 5-15P to IEC C13, Black, 1') is capable of handling is specified at 125V, therefore this product would not accommodate a 220V signal connection.

Dale	26/09/2024
[RG6/U] This is excellent quality cable that remains flexible in sub freezing conditions. No inner stiffener, so this is easy cable to route in tight bends. This is my favorite Catagory6 cable. Solid copper. 23awg. 5

Kris Gnagey	03/09/2024
[75 Ω] We wanted to get pink cable to distinguish our cables in a shared closet space. This was the only place I could find bulk cable in this color at a good price. Because the cable comes from a third party, the shipping took a little longer than expected, but B&H support was very helpful and prompt with relaying that information when it became available to them. 5

Rosanna	17/07/2024
[PVC] I’ve used other brands of BNC connectors and have regretted it each time. These connectors are reliable and easy to use. Have never had a problem. 5

Curtis	26/06/2024
[75 Ω] One of the easiest ways to purchase what I need. 5

David HIrsch	26/06/2024
[3.0" (76.2 mm)] These are about the easiest way to terminate RG-6 for HDSDI I have used in my over 30 years of AV integration.� They work just like they say, Snap and seal. 5

Chris	25/06/2024
[16.75 lb] Great wire and the rolls are affordable. 5

Darren	21/06/2024
[3.0" (76.2 mm)] I love these ends. They are super easy to install on cable runs and they don't fail like other ends I have bought that pull back out after medium usage. The KEY thing is you need to push them in firmly after you strip the ends. LOVE THESE and highly recommend ! Just make sure you buy the Belden Snap-N-Seal PROPSAKIT Compression Tool and Stripper Kit that goes with it to make it super simple. And I always use Belden 1694A RG6 Low Loss Serial Digital Coaxial Cable and have had zero issues over the past 5 years. 5

Andrickson	07/05/2024
[3.0" (76.2 mm)] muy bueno! 5

Darren	15/04/2024
[300 V] I love these ends. They are super easy to install on cable runs and they don't fail like other ends I have bought that pull back out after medium usage. The KEY thing is you need to push them in firmly after you strip the ends. LOVE THESE and highly recommend ! Just make sure you buy the Belden Snap-N-Seal PROPSAKIT Compression Tool and Stripper Kit that goes with it to make it super simple. 5