This Vicoustic Cinema Forte VMT White Calacatta Cremo 2-Packpanel features a calacatta cremo VMT panel with a white frame and is part of the Vicoustic Cinema Family that also includes the Cinema Piano VMT and Cinema Fortissimo VMT. Its sloping front has a minimum thickness of 2.36" and a maximum thickness of 4.72", which results in an excellent absorption capacity. Furthermore, by rotating the panel you can create very interesting patterns, especially if you combine them with the other panels on the same line.

These 3 new panels are mostly made of recycled materials, and being inspired by VMT technology can be customized. Compatible with VicFix J profile, these panels can also be installed in the corners acting as a broadband Bass Trap, with enhanced performance in the low region.

Sloping Front Panel    Broadband Absorber    For Walls and Corners    VicPET Wool, MDF, Lacquered Steel

Related Questions and Answers

Q: 1. will this cable work with the Zhiyun crane 2 8.0 v outlet?

A: Not sure of the question. These cables are designed to power the Pocket Cinema Camera 4K when connected to a variety of power sources like battery, D-Tap, and other BMD power supplies.

Q: 2. What kind of connection is on the rear side of the enclosure?

A: the manufacturer does not specify but based on the specified bus speed it would have to be some form of PCIE connection on the dock https://www.bhphotovideo.com/c/product/1529924-REG/atech_flash_technology_bj_0122_r01_4_bay_cinema_dock_system.html or a proprietary equivalent to be able to sustain the NVME data rates and pass that through thunderbolt 3

Q: 3. My vlock plate has both a 14.5 v and a 50v dtap option. For the bmpcc4k. Which should I connect to?

A: I would hope it's a 5.0V option and not a 50V. 50V would definitely fry your camera. 5.0V would not be sufficient. The BMPCC4K can use up to 20V though the AC adopter port. I would use the Dtap to DC Adapter cable to attache the camera to the V-lock battery.

Q: 4. Will these work for the 6K Pro?

A: Yes, The Blackmagic Design Pocket Cinema Camera 4K DC Cable Pack will also support the Pocket 6k & Pro camera models.

Q: 5. Can I install any regular m.2 in this unit? Maybe a Crucial 4TB P3 NVMe PCIe 3.0 M.2?

A: Standard M.2 PCIe 3.0 x4 NVMe SSDs are compatible with the Blackjet DX-1M M.2 NVMe SSD Enclosure for TX-4DS & TX-2DS Cinema Docks, and as such, the Crucial 4TB P3 NVMe PCIe 3.0 M.2 should be appropriate.

Q: 6. Is the lens metadata? /I?

A: You will need to use the Angénieux MSU-1 & MSU-1A Universal Cine Servo Units for lens metadata and /i Cooke communication.

Q: 7. Will this cable combination also work on the pocket 6K camera?

A: Yes it will. This is a good set of cables to have for both 4K and 6K models. It will allow you to use other BMD power supplies with this camera if necessary.

Q: 8. any L-Series battery plate recommendations?

A: We are not aware of any L-Series batteries or plates which would work with this cable.

Q: 9. will this 2Pin power to D-Tap work with the Red Komodo camera?

A: Yes, the Blackmagic Design Pocket Cinema Camera 4K DC Cable Pack can be used to power a RED Komodo so long as it is connected to an appropriate power source that would provide the correct voltage required by the RED Komodo.

Q: 10. are these individual cables or all bunched and attached together? that would add a lot of unnecessary weight wouldnt it?

A: The Blackmagic Design Pocket Cinema Camera 4K DC Cable Pack have separate cables.