The Antari Z-1200III Fog Machine adds fog to nightclubs, bars, bowling alleys, and event centers, as well as mobile entertainers and DJs, and anyone looking to add a dry and consistent smoky atmosphere to their events.This high-performance, entry-level fogger features a Unicore heater with thremal cut-off technology to prevent overheating. A built-in voltage protection module signals if you're plugged into the wrong output voltage and increases the output volume by 10%.

Use the LCD screen to set the unit up for the type of fog fluid you're using, with four options to choose from. The built-in tank holds 2.5 liters of fluid and consumes up to 85mL per minute. Use the hanging bracket to mount the machine onto a truss or similar hardware. Control the Antari Z-1200III via its single DMX channel or use the included Z-3 wired remote. The Z-50 wireless remote control is available separately.

Unicore Heater with Thermal Cut-Off    DMX Connector    10-Minute Warm-Up Time    Large 2.5L Tank    Uses 4 Different Fluid Options    Includes Wired Remote

• 1200W fog machine provides smooth, dry fog
• Unicore heater with thermal cut-off technology
• LCD screen
• Choose from four different types of fog fluid
• 1 DMX channel
• 2.5L tank
• 85mL per minute fluid consumption
• 10-minute warm-up time
• Includes hanging bracket and wired remote
• Built-in voltage protection module triggers increased output

Related Questions and Answers

Q: 1. this adapter work with lightkey software??

A: Unfortunately, the SoundSwitch Micro-DMX Interface is not compatible with the Lightkey Software.

Q: 2. How long are the coils good for?

A: The manufacture says the coil in the Vosentech MicroFogger 5 Pro Portable Smoke Machine Ultimate Kit can last a very long time. There is not a specific time frame but if used correctly it can last years. You should never let it run out of liquid and still run it. And do not use it upside down.

Q: 3. How does this perform as a haze (not smoke or fog) machine?

A: The SmokeGENIE Handheld Fog and Haze Machine Professional Kit is very good as a haze machine. Note it small and can does about 500 Cubic Feet per Minute.

Q: 4. Is this product compatible with the Faze Stream 700 by Eliminator Lighting? Their remote is a tc-4

A: I contacted Eliminator Lighting with your inquiry. They state that they do not believe the Faze Stream 700 would work with the Antari Fog Machine HC-1 Timer Remote for HZ-100 / HZ-350 / HZ-400 Haze Machine. They checked with their warehouse and both the Faze Stream 700 and the replacement remote are discontinued. Due to the low demand they have zero replacement remotes in stock. What I would recommend would be to purchase the remote and try it with your Faze Stream 700. If it does not work, you have 30 days from the original purchase date to return the remote for an exchange or refund. The link to our Return link is listed below. https://bhpho.to/2bxrYlG

Q: 5. Can this fixture control individual cells?

A: No, the Creamsource SpaceX RBGAW Color LED Light, 1200W does not allow for control of the individual cells.

Q: 6. Is this also compatible with the Aputure MC Pro?

A: No, the Aputure USB-C to DMX Adapter (Single) is only for the Aputure MT Pro and INFINIBAR Lights.

Q: 7. Will this work with the amaran 1' 2' and 4' tubes?

A: Yes, the amaran PT4c RGB LED Pixel Tube Light (4'), the amaran PT2c RGB LED Pixel Tube Light (2'), and the amaran PT1c RGB LED Pixel Tube Light (1') have USB-C ports and can be controlled through DMX with the following cable: the Aputure USB-C to DMX Adapter (Single).

Q: 8. Will this work with amaran f22c?

A: Yes, the Aputure USB-C to DMX Adapter will work with the Amaran F22c 2 x 2' RGB LED Flexible Light Mat, due to each being 5-Pin.

Q: 9. Can you use this with Luminair or blackout?

A: Aputure's Sidus One Wireless DMX Transceiver is a battery-powered single-universe transmitter and receiver for CRMX, DMX512, RDM, Art-Net, and sACN protocols, designed to expand the breadth and scope of Aputure's DMX console, the Sidus Link Pro app. It will connect to Lumenaire but not Blackout.

Q: 10. Is it possible to connect to a wifi network as the incoming feed, such as using a Unifi AP? I have a client whose office is in an old building and has internet provided by the landlord via WiFi.

A: If there are no Ethernet jacks in the office connected to the same network, no, you would need to use a different device to connect it to the same Wi-Fi network.