The DigitalFoto Solution Limited Mini-HDMI Male to Micro-HDMI Female Adapter supports HDMI version 1.4 and resolutions up to 1080p. This is a 7.8" mini-HDMI male to micro-HDMI female adapter for connecting devices like cameras or smart phones to camera monitors, recorders, and gimbals. It is made from pure copper wire wrapped in environmentally friendly PVC with gold-plated connectors.

Mini-HDMI Male to Micro-HDMI Female    HDMI Version 1.4    Supports Up to 1080p Resolution    Gold-Plated Connectors

Related Questions and Answers

Q: 1. Does this have a 1/4-20 thread on the bottom to attach to a tripod?

A: Yes, it has a 1/4 inch female thread on the bottom. This allows you to attach it to most tripods with a head.

Q: 2. Does it fit this K&F filter https://www.bhphotovideo.com/c/product/1536341-REG/ ? And if not is there one that does fit?

A: Yes, 100 mm equals 3.937 inches the unit will adapt to the following sizes 4 x 4" or 4 x 5.65" Filter

Q: 3. Title and description say 1.6-7.9" (INCHES), but the specification page says 1.6-7.9' (FEET). Can you tell me which is correct?

A: The DigitalFoto Solution Limited Coiled Right-Angle Mini-HDMI to HDMI Cable is 1.6 to 7.9'.

Q: 4. Will the glidecam vest and arm work with this?

A: Yes, the DigitalFoto Solution Limited Stabilizer Arm Adapter for Universal Single-Handle Gimbal is compatible with the Glidecam X-10 Dual Support Arm Stabilizer Vest System.

Q: 5. Not confident enough to try it on FX6 as some past third party BPU batteries had an issue damaging the data pins. Safe to use?

A: Yes, the DigitalFoto Solution Limited V-Mount to BP-U Dummy Battery Adapter with Full Decoding is safe to use due to the built in full decoding chip.

Q: 6. Will this work on the original Smooth Q gimbal?

A: This is for the Smooth 4, we are not aware of it fitting the Smooth Q. Instead we recommend the DigitalFoto Solution Limited Universal L-Bracket with Cold Shoe Mount for Single-Handle Gimbal, BH #DIM0667II. https://bhpho.to/2JuR7iB

Q: 7. Would this be a good light to use with a Panasonic HC-W580 camcorder for outside night taping?

A: It always depends on the use of the light and the distance the light will be from the subject. If you are Four feet from your subject then yes, the DigitalFoto Solution Limited Magnetic Mini RGB LED Light (2500 to 9000K) will work. For anything else that is further away this light may fall short of expectations.

Q: 8. would this work with vista ll arm and the crane 3s pro?

A: Yes, the DigitalFoto Solution Limited Stabilizer Arm Adapter for Universal Single-Handle Gimbal is compatible with the Proaim Flycam Vista-II Arm and the Crane 3S Pro.

Q: 9. I understand the gimbal will work fine but w no weights on the bottom, won't the whole operation want to swing upside down?

A: The DigitalFoto Solution Limited Stabilizer Arm Adapter for Universal Single-Handle Gimbal can be tightened so that the gimbal you connect will not roll.

Q: 10. Curious why the DTAP has 3pin holes instead of 2 like traditional connectors. How does this effect when using standard 2pin D-tap

A: The DigitalFoto Solution Limited Multifunction D-Tap Breakout Adapter with USB, DC Barrel & 4 x D-Tap Ports has three pin holes so that the input is multi directional, meaning that the D-tap plug you connect to each port can be inserted to that the d-tap is facing either direction (cable out to the left or out to the right). The d-tap pins would only connect to two of the three pin inputs.