Turn your Bowens-mount fixture into a soft, even, omnidirectional light source with the SB-30 Acrylic Soft Ball, a lantern-style light modifier from DigitalFoto Solution Limited. Ideal for overhead use or to raise the ambient illumination level, the bulb measures 11.8" from the base to the crown.

Lantern-Style Light Modifier    Soft, Even, Omnidirectional Light    For Use with Bowens-Mount Fixture    11.8" Height from Base to Crown

Related Questions and Answers

Q: 1. 66Ib=?Ib

A: 66 lbs is the support weight of the DigitalFoto Solution Limited N52 Panoramic Ball Head. So you can put on that head a camera and lens that weighs up to about 66 lbs.

Q: 2. Is the bh-30 detachable from the 10inch suction cup it comes with? Interested in knowing the size of threading underneath, I would like to confirm if it's a 3/8 hole

A: Yes, with the Matthews BH-30 Ball Head with 10" (25cm) Suction Cup Mount, the BH-30 can detach from the suction mount, and the threading underneath is 3/8"-16.

Q: 3. How do you connect a go pro to this?

A: The BH30 has a removable top plate and you can screw into any of the go pro mounts with a 1/4-20 female receiver.

Q: 4. Will this ball head work with Arca-Swiss universal quick release plates?

A: The Matthews BH-30 Ball Head has not been tested with all Arca style plates. But the head uses standard Arca Swiss style plates, and should work with most.

Q: 5. Leofoto's site says this has support wt. of 15kg, 33lb. Why does your site say 13.2lb?

A: According to the manufacturer, the maximum load capacity of the Leofoto LH-30 Ball Head with Quick Release Plate is 33.1 lb (15 kg). Our website should be updated & corrected to reflect this information shortly.

Q: 6. are other shoes available for this head? More specifically I need an extended shoe with 1 or ideally 2, 3/8 screws, not 1/4 20.

A: yes,you can get other plates that will fit the BH30,in my case i just replaced the hole top plate with RRS quick release system.this is a vary good ballhead fot the price.

Q: 7. What are the actual dimensions (L & W) of the writing surface only (below the clapper mechanism itself? (If you measured it as a rectangle, without the rounded edges).

A: About 7" x 11"

Q: 8. Will this fit on a GODOX collapsible softbox that fits on a GODOX S2 bracket? I assume the round outer diameter’s are the same.

A: This Westcott Optical Spot Mount for Bowens has Bowens mount which matches the mount on GODOX S2 bracket, however please, make sure you are placing it on the correct size speed ring on your light modifier.

Q: 9. Are the color lines printed on or are they a sticker?

A: The color lines would be printed on this Elvid 7-Section Acrylic Production Slate with Soft Case Kit.

Q: 10. How much weight can this single suction mount hold? I saw 39lbs in reference to the head, but I want to confirm what the suction cup can handle.Thank you!

A: Yes, Matthews' website and the Overview on our website both indicate the Matthews BH-30 Ball Head with 10 (25cm) Suction Cup Mount will support up to 39.6 lb (18 kg). The ball head suction cup mount itself weighs 6 lbs (2.72 kg).