The EtherWAN EG97244-4VCR 28-Port Layer 3 Ethernet Switchfrom EtherWAN EG97244-4VCR 28-Port Layer 3 Ethernet Switchis a rackmount switch supporting a hardened-grade operating temperature of -40 to 167°F and offering eight GE RJ45, 16 x GE 100/1000 SFP, and four 1G/10G SFP+ ports. It features a redundant internal universal 100-240VAC power supply with an IEC connector.

-40 to 167°F Operating Temperature    8 x GE RJ45 & 16 x GE 100/1000 SFP Ports    4 x 1G/10G SFP+ Ports    Redundant Internal Power Supply

Related Questions and Answers

Q: 1. Will this case fit a Sony a7riv with a24-70mm f2.8 GMii lens?

A: Unfortunately Matador Camera Base Layer 2.0 is too small for that camera kit.

Q: 2. The WFT-R10 batteries wear out fast, as one battery powers the cam and one battery powers the file transfer. Is issue fixxed?

A: The Canon BG-R20EP Battery Grip with Ethernet Port is not a wireless grip like the WFT-R10 is, so it does not have that issue. It can use the two batteries in the grip to power the camera.

Q: 3. Will this work with a monitor that has thunderbolt 3 input?

A: No, this adapter requires the thunderbolt host connection from the source device to operate.

Q: 4. Will this fit a Sony A7Riii with a 70-200 lens attached?

A: Unfortunately, the Matador camera base layer 2.0 is too small to hold that A7RIII and FE 70-200mm f/2.8 GM OSS. It would hold the lens by itself, but even then only barely.

Q: 5. Will this fit the 5Dmiii + 24-70? Thanks

A: The Canon 5D III with a 24-70mm lens attached will fit in the Matador Camera Base Layer 2.0.

Q: 6. Is this a remote office's gateway for internet access? Is that the intended use or for end client AP access to bridged corp LAN

A: This EtherWAN Hardened Wireless Bridge Kit 1+6 is designed to wirelessly bridge a network to up to 6 remote locations up to two miles away, line of sight, from the EasyLink base unit.

Q: 7. Do 2 batteries supply power to the R5II, or does only 1 battery do so while the 2. is used for image upload like in the WFT-R10?

A: The Canon BG-R20EP Battery Grip with Ethernet Port supplies power to the Canon EOS R5 Mark II Mirrorless Camera with two batteries. Like the Canon WFT-R10A Grip, it allows wireless file transfer.

Q: 8. Is the ethernet port able to be used as an additional stills tether port as a more stable connection port than the USBc?

A: Yes because the ethernet connection on the Canon BG-R20EP is 2.5G (up to 2500Mbps) while USB-C is only up to 480 Mbps. Plus ethernet connections can be longer and the USB.

Q: 9. Will this fit the Panasonic G9/GH6 cameras outfitted with either the 10-25 f/1.7 or 25-50 f/1.7 lenses?

A: No, the Matador Camera Base Layer 2.0 is too small for either camera setup.

Q: 10. What transceivers are recommended for the 100G ports on this switch? I've searched around

A: Because the Blackmagic Design Ethernet Switch 360P has not yet be released, we currently don't have any specific transceivers we recommend for the 100Gb ports of this switch.