The Vue Pro 4-Camera System with Holders from DTEN combines four 12MP 4:3 camera sensors (one in each camera) and operates multiple lenses simultaneously to capture in-room participants at eye level. Boasting 4K video quality and a combined 160° horizontal field of view, the camera utilizes advanced, smart-framing AI technology to dynamically frame and capture participants with tight and sharp headshots from anywhere in the room.

4 x 12MP 4:3 Camera Sensors    Operates Multiple Lenses Simultaneously    4K Video Quality    160° Combined Field of View    Captures Subjects at Eye Level

Related Questions and Answers

Q: 1. Will the 4X Powermate adapter for your camera work with the 2X version? I don't really see the difference?

A: There is a specific 4x T mount adapter

Q: 2. What is the thickness of the carrier? I'd like to use it with a Nikon ES 1 slide copier. Thanks!

A: I have negative and slide holders. The negative holder is 0.28 (7.0mm) thick and the slide holder is 0.29 (7.36mm). The width (just in case you're thinking of width instead) is 2.465 (62.6mm), the same for both.

Q: 3. I've got 80mm front diameter lenses. I wish to use this MB directly on the rods. What kind of donught can i use to block the rear light? Thanks,

A: For speed and convenience, I would suggest rather than a doughnut, useing this Movcam Universal Stretch Donut (130 mm) B&H # MOARU130 Mfr # MOV-301-0202MM2.

Q: 4. what is the ring lite size/diameter?

A: The inner diameter is 7.8'' and the outer diameter is 10.1'' on the Gator Ring Lights.

Q: 5. Hi there, is this compatible with 7500i model?

A: Yes they are!

Q: 6. Does this come with a case?

A: No. What's in the box is the following 10 Inch Ring Light 10 Inch Ring Light Tripod Stand Weighted Base Stand Phone Mount

Q: 7. Will this work for Plustek 7200 ?

A: I Have No Idea.

Q: 8. Can this Matte box hold a double width tray like for a 138mm filter or diopter?

A: The Chrosziel Matte Box 456-20 is designed for use with 2 individual filter trays, allowing rotation of each individual tray. A double thick tray would not fit with this configuration.

Q: 9. It says these are for AX1 tubes. Will these also hold the Titan Tubes or any other Astera tube for that matter?

A: The following unit will support both AX1 and titan tube's.

Q: 10. If this holder is used on an Epson Perfection V600 scanner with EpsonScan software, will the software still automatically find and isolate each frame? Or would I have to marquee and scan each frame separately?

A: I tested the Plustek 35 mm film holder on my Epson V700. If your Epson V600 is similar enough to mine, it doesn't isolate each frame as the Plustek 8100 does. You would have to draw a selection area around each frame. However, the thickness of the film holders for the two scanners is not the same. I measured approx. 3 mm from glass to film for the Epson holder, and approx. 4.5 mm for the Plustek holder. Then I did a scan with each scanner. It was sharper on the Plustek, fuzzier on the Epson. Depth of field is very narrow on the scanners. The height difference creates unfocussed scans when the Plustek holder is used with the Epson scanner.