Seagate 20Tb Ironwolf Pro Nas Hdd 7200 Rpm Sata Iii

Seagate 20tb Ironwolf Pro Nas Hdd 7200 Rpm Sata Iii

Product Code: eq130683
Availability: In Stock

$4,799.88 $7,295.82

Qty

16 reviews Write a review

Description
Reviews (16)

Designed to deliver performance, reliability, and dependability in multi-bay, multi-user RAID and NAS environments within commercial and enterprise settings, the Seagate 20TB IronWolf Pro NAS HDD 7200 RPM SATA IIIfrom Seagate 20TB IronWolf Pro NAS HDD 7200 RPM SATA IIIis built to withstand 24/7 operation, or 8760 hours per year. This 20TB drive has been equipped with a SATA III 6 Gb/s interface, a rotational speed of 7200 rpm, a 3.5" form factor, and a 256MB cache, providing users with ample storage capacity with data transfer speeds of up to 285 MB/s. The IronWolf Pro also has an MTBF rating of 2.5 million hours and a workload rate of up to 550TB per year. Seagate's AgileArray technology provides dual-plane balancing, time-limited error recovery (TLER), and rotational vibration (RV) sensors to deliver enhanced RAID performance. Included is a limited 3-year Data Recovery Service that helps you retrieve damaged data in the event of a mechanical error, accident, or natural disaster, and overall protection is provided by a limited 5-year warranty.

20TB Storage Capacity per Drive 3.5" Form Factor SATA III 6 Gb/s Interface 256MB Cache 7200 rpm Up to 285 MB/s Data Transfer Rate 2.5 Million Hours MTBF Workload Rate: 550TB per Year AgileArray Technology Seagate Rescue Data Recovery

Key Specs
Total Installed Storage	20 TB
Drive Type	SATA III / 3.5" HDD (7200 rpm)
Read Speed	Maximum: 285 MB/s
Write Speed	Maximum: 285 MB/s
Parameters
Drive Type	SATA III / 3.5" HDD (7200 rpm)
Read Speed	Maximum: 285 MB/s
Write Speed	Maximum: 285 MB/s
Encryption Support	No
Mean Time Between Failures (MTBF)	2.5 Million Hours
Endurance (Total Bytes Written)	550 TB
Power Draw	7.7 W (Active) 5.5 W (Idle) 1.0 W (Standby)
Input Power	12 VDC at 2 A
General
Operating Conditions	32 to 97°F / 0 to 65°C
Operating Shock	40 G / 2.0 ms
Storage Conditions	-40 to 158°F / -40 to 70°C
Dimensions	5.79 x 4.01 x 1.03" / 146.99 x 101.85 x 26.11 mm
Weight	1.5 lb / 670 g
Packaging Info
Package Weight	1.81 lb
Box Dimensions (LxWxH)	10.6 x 6.1 x 2.9"

All-CMR (conventional magnetic recording) portfolio enables consistent, 24/7 performance, allowing users to access data virtually anytime, anywhere.

Up to a 550TB per year workload rating, a 2.5 million hours MTBF, and a limited 5-year warranty for a solid total cost of ownership (TCO).

Seagate provides complimentary Rescue Data Recovery Services for three years, giving users a hassle-free, zero-cost data recovery experience.

Helps protect data with prevention, intervention, and recovery recommendations to ensure peak system health.

Seagate's AgileArray technology provides dual-plane balancing, time-limited error recovery (TLER), and rotational vibration (RV) sensors to deliver top RAID performance in multi-bay environments.

Related Questions and Answers

Q: 1. re: B&H #SEST18000NE0. Is "17200 rpm" a typo?

A: The Seagate 18TB IronWolf Pro 7200 rpm SATAIII Internal NAS HDD (CMR) BH #SEST18000NE0 is a 7200rpm drive. The error has been reported and should be updated as soon as possible.

Q: 2. I’m a professional photographer and all of my images are stored via these large drives. My operating system is on a ssd, and when I first bring images in they are processed on my ssd drive. But one I store them, they are still accessed by my software (Lightroom and other Adobe products), and often I’m still retrieving, searching for and editing the images long after they were moved off my ssd drive. This drive will be wired directly into my mother board and PC that has 4 storage drives. What are the pros of the following two drives and cons for my situation. Which would you recommend? Thank you.

A: I think your question boils down to a comparison of an SSD vs a HDD. For backup there are many reasons to go with a hard drive. Price, Capacity. For the OS and Applications - we would suggest SSDs.

Q: 3. It is compatible with Synology DS920+?

A: Yes. The Seagate IronWolf Pro series drives are recommended for use in NAS enclosures such as the Synology DS920+.

Q: 4. Will my Imac read this external device, it being 20TB?

A: The Seagate 20TB IronWolf Pro 7200 rpm SATA III Internal NAS HDD (CMR) BH #SEST20000NE0 is an internal drive, not external. If you buy an external enclosure for 3.5'' SATA HDD like the Oyen Digital Novus USB Type-C Rugged 3.5" HDD Enclosure BH #OY3N1CBL then you can use it externally with an iMac.

Q: 5. Would the 10TB suitable for the following NAS drive. Synology DiskStation DS920+ 4-Bay NAS Enclosure?

A: Yes, it is suitable.

Q: 6. The 20TB version of the HDD is running a little hot, up to +54°C. Is that normal?

A: The average temperature for a 3.5" Disk drive is going to range between 41-77F (5-25C). 54C is abnormal and we advise to replacing this disk immediately.

Q: 7. Why does B&H list this drive as a ST4000NEA025 when (AFAIK) no such part exists, and the photos used indicate the actual part number, ST4000NE025?

A: With lots of dealings with Seagate drives, the âAâ is for the US market. Replace âAâ for Zâ for Canada and so on. This is proper ð If you try to warranty swap an international drive in the US MARKET, youâll be screwed

Q: 8. will this HDD work with LaCie 2big Dock 2-Bay Thunderbolt 3 RAID Array?

A: The Seagate 20TB IronWolf Pro 7200 rpm SATA III 3.5" Internal NAS HDD is not listed as a compatible internal drive and may not function properly.

Q: 9. Is it compatible with nas synology DS920+?

A: Yes. This Seagate 16TB IronWolf Pro 7200 rpm SATA III 3.5" Internal NAS HDD (CMR, OEM) would work with the Synology DS920+

Q: 10. Will this drive work with Synolgy DS720+?

A: Yes, the Seagate 6TB IronWolf Pro 7200 rpm SATA III 3.5" Internal NAS HDD (CMR, Retail) BH #SEST6000N000 is compatible with the Synology DS720+.

Brett	19/09/2024
[12 VDC at 2 A] These drives are fantastic for a NAS unit and B&H delivers a great product on time. 5

Morgan	18/09/2024
[20 TB] This just plugs straight into a Synology NAS. It gives a warning about it not being on the approved compatibility list, but works just fine. If you're ADDING this to a NAS which already has drives in it, remember that it can only add as much storage as the next-largest disk in the array. If you add one of these to an array containing 18TB disks, it can only add 18TB to total storage. If you add two, then they become backups for each other and you can use the full amount of space. This is also dependent on which RAID scheme you are using, but everyone with a Synology is probably using SHR mode. 5

James	24/08/2024
[1.81 lb] I bought 4 of these. I plan to get 4 more. They work well. 5

Arun Kumar	15/08/2024
[1.81 lb] You won't go wrong with Seagate Wolf Pro as a best companion for your NAS 5

Jason	13/08/2024
[40 G / 2.0 ms] I have been using IronWolf Pro drives in a couple NAS devices for over 5 years and they've been very reliable. These are new, but two sets of smaller capacity drives were rock solid. 5

Hossam	12/08/2024
[550 TB] Fast delivery, well packaged and it works. I can't ask for more. 5

Michael	04/08/2024
[12 VDC at 2 A] These drives work great in my Synology 6 Bay Nas - 5

Anthony	01/08/2024
[20 TB] Great product and service. Always get great service when purchasing and no issues with products. 5

Larry	15/07/2024
[12 VDC at 2 A] This is a bare drive ready to install. All that needs to be done is hook up the power and SATA cable then initialize and format the drive. The drive is nice and quiet. It was designed to be running all day every day for years, unlike some consumer drives. 5

Ryan	03/06/2024
[12 VDC at 2 A] This is a great hard drive for server use or file backups, which is using this for both. If I need to expand my storage needs these are the first I'd consider getting again. 5