The yellow Haukland 7-in-1 Photography Jacket Yellow Men's 2XLfrom Haukland 7-in-1 Photography Jacket Yellow Men's 2XLis three separate layers that can be worn in seven different combinations. There are 27 pockets between the three jacket layers, including the mini photo bags. Each jacket can be worn separately as well as together, depending on the conditions you're in.

Waterproof Outer Jacket    Padded & Quilted Inner Jacket    Fleece Base Layer    Windproof, Rainproof, and Breathable    Microfiber Cloth Pocket in Each Jacket    3 Mini Photo Bags Included

The first layer of the 7-in-1 jacket can be worn alone on chilly fall or spring days. It is cut longer than most standard fleece jackets to help keep you covered and warm. The fleece fabric protects against light rain and moves moisture from the inside to the outside of the jacket. In heavier rain, you can zip this fleece layer into the outer jacket. You can attach both sleeves and the collar of this jacket to the outer jacket with eyelets and buttons.

This first layer jacket has eight pockets including five pockets in the mini photo bag. There are two large front pockets and one pocket in the left sleeve with an elastic strap and metal clip for a microfiber cleaning cloth. The mini photo bag in this layer is made from mesh.

The second layer of the 7-in-1 jacket is a padded, quilted jacket with a hood and a stylish checker design. This jacket can be worn by itself on chilly days without rain. It also zips into the outer jacket for an additional layer of warmth on cold and windy days. You can connect the hood and sleeves of this jacket to the outer jacket with buttons and eyelets. It is cut slightly longer than other padded jackets but doesn't show under the outer jacket.

This second layer jacket has eight pockets when you count the mini photo bag. There are two large front zippered pockets and one microfiber cloth pocket with an elastic strap and metal clip in the left sleeve. The mini photo bag has a waterproof film to protect your equipment in snow or rain.

The third layer of this jacket is lightweight, water and wind resistant with a rain column of 6000mm. It is made from tear-resistant 228T nylon-treated fabric. The interior mesh enhances the jacket's comfort and breathability while providing air circulation. The zippers under the arms provide extra ventilation if desired. Additionally, this outer jacket has a welded 2-way YKK zipper for extra water and wind protection. There are also elastic bands in the hood for a more secure fit and wrist wind stoppers to seal the jacket and prevent unnecessary heat loss. You can also tighten the sleeves with the hook-and-loop adjustment. The front side of the hood is cut longer to protect your camera and viewfinder in inclement conditions.
There are 11 different sized pockets throughout this jacket including the five pockets in the mini photo bag. There are two chest pockets designed to carry lens caps, two large pockets with hook-and-loop closures for filters up to 100x150mm or your Haukland 3-in-1 gloves, and an interior top left pocket for a slim wallet, your passport, or phone. There is also a left-sleeve pocket with an elastic strap and metal clip for your lens cleaning cloth.

Photographers have worn the Haukland 7-in-1 jacket from anywhere around 77 °F in the rainforests of Costa Rica to -4°F in Finland, as well as in winds over 100km/H.

• Layer 1 has 5 pockets, made entirely of mesh for comfort.
• Layer 2 has 5 pockets and a waterproof film so you can drop the jacket in the snow without exposing your electronic equipment.
• Layer 3 has 5 pockets with labeled memory card & battery pockets, plus two additional large pockets for drone batteries, power banks, and other accessories. This area is reinforced with a waterproof film on the exterior side to provide extra protection for your electronic equipment. On the interior side, the pockets are made of mesh.

Related Questions and Answers

Q: 1. Is the jacket compatible with the fish eye and telephoto lenses?

A: Yes, this Olympus CSCH-127 Silicone Jacket for Tough TG-6 Digital Camera can Mount The accessory lenses with the Jacket in place

Q: 2. Does it fit the size of Canon 5D Mark 4?

A: No it does not fit 5d.This is for the Canon m5 mirrorless camera. It fits the m5 very well

Q: 3. Is it compatible with the TG7?

A: The Olympus CSCH-127 Silicone Jacket for Tough TG-6 Digital Camera is compatible with the OM SYSTEM Tough TG-7 Digital Camera (Red).

Q: 4. Does this jacket case fit the RX1R11 camera?

A: I purchased it for a RX1R MK2. It fits and you can have a filter under the lens cap too.

Q: 5. Does this pack come with a rain cover?

A: Yes. The Haukland x Evoc Photo Backpack (Black, 18L) comes with a rain cover.

Q: 6. is this compatible with the Olympus LG-1 LED Macro Ring Light?

A: It is not possible to use this case along with the LG-1 at the same time.

Q: 7. Will this case fit HX80?

A: This case is only designed for the HX90V or WX500 camera and will not be compatible with the HX80.

Q: 8. lens hood?

A: A hood will fit if attached to the lens in reverse for storage.

Q: 9. Can the camera be used underwater with the jacket on?

A: Yes, you can use it underwater with the jacket on.

Q: 10. How do you attach the strap to the outer casing ?

A: As seen on the B&H website, the strap has a collar and a buckle (coming from the tip of the strap and up) on each strap. I slipped the end of the strap through the metal loop on the covering from the outside to inside then bring the end through the collar and now go into the buckle from underneath. That held pretty good for me. It helps to have some excess strap loose in the buckle from the initial pass through so when you bring the strap back through after going through the metal loop and collar, you have a little more wiggle room to get the strap back through the buckle. I had the end of the strap about 2 out of the buckle. Although the strap is great, I have since gotten a Peak Design leash to replace it cause sometimes I don't want the strap in the way. Hope this helps.