Stay protected with the HP LaserJet Pro MFP 430x 3-Year On-Site Support Planfrom HP. Providing three years of coverage, this manufacturer support plan provides next business day on-site hardware support following remote diagnosis. Replacement parts and materials are included in the support plan, as are formal escalation procedures and management and access to electronic support information and tools.

Please note, to take advantage of this warranty, your hardware must currently be under its native warranty. Service starts on the date of your hardware purchase, and service levels and response times may vary depending on your geographic location. Please be aware that external displays are not covered.

For HP LaserJet Pro MFP 430x    Manufacturer Support Plan    Next Business Day On-Site Support    Includes Replacement Parts & Materials    HP Remote System Access and Support

In-person repairs, parts and service will arrive at your door the next business day. HP experts are on the job nine hours a day, five days a week. Please note, service levels and response times may vary depending on your geographic location. Service starts on date of hardware purchase.

Know that your hardware will be good as new as soon as possible thanks to HP's knowledgeable expertise and efficient service and support.

HP support specialists are always ready to assist in whatever way the situation calls for, whether it's remotely over the phone or in person.

• HP Color LaserJet Multi-Function CLJ Pro MFP 430x Series Printers

Related Questions and Answers

Q: 1. Where is the paper feed? In the back or front?

A: The HP ENVY Pro 6455e All-in-One Printer BH #HEENVY6455E paper tray is on the front.

Q: 2. Does the support rod slides out if there is no Y shape support attached to one end? Can people easily lose the center rod?

A: Yes it would slide out.

Q: 3. Is the diameter of the support rod 15mm?

A: Yes, this supports 15mm rods.

Q: 4. will this work with the Xeen cinema lenses support foot?

A: Yes, when paired with an appropriate 15mm rod system, such as the SHAPE Compact Revolt Shoulder Baseplate (SKU: SHBP20), this lens support should work well with most Xeen lens and camera set ups, although some camera systems may require a riser on the camera side such as the Shape Paparazzi Riser SHRISERPA1.

Q: 5. How to connect to my WiFi

A: Using a smartphone, tablet, or pc connected to your home WiFi, you would go to 123.hp.com/laserjet and follow the instructions to connect and setup the printer.

Q: 6. Is there a tightening mechanism to secure the lens support to the rod? Seems like its not completely secured to the rod system.

A: Hi Victor,Thank you for your question. There is a silver knob in the center, below the main rod bloc to tighten the bloc on rods.We hope this helps and we thank you for your interest in our products.The SHAPE team

Q: 7. Please advise, what is the length of the central cylinder?

A: Hello Ievgen,Thank you for contacting us! The length of the central cylinder is 2 inches long. That is without the 1/4-20 - 3/8-16 bolt on top of the cylinder. If you include the bolt, the total length is 2 3/4 inches.We hope this helps and we thank you for your interest in our products.The SHAPE team

Q: 8. Hi, what's the minimum height I can achieve with the 1/4" 20 head? I have only 1.1cm of clearance between my rod and my cine lens foot.

A: Yes, The SHAPE Universal Lens Support Pro has a minimum supported distance of 1.1cm The minimum height is actually 1.1 cm, meaning the silver tube is all the way down inside the rod bracket, only the ¼-20 thread is above the rod bracket opening. Also, The whole lens support can be installed upside down by the way for even more clearance.

Q: 9. How to connect the wifi to my hp M15w printer

A: This link talks about connecting your printer to a WiFi network https://support.hp.com/us-en/product/hp-laserjet-pro-m14-m17-printer-series/16647043/model/16647063/document/c04608548

Q: 10. What is the load capacity of this lens support? Im using this to support a 3lbs lens with a clamped- on 4x5.65 matte box with full 3 heavy filters

A: There is no listed weight specification for the SHAPE universal lens support pro, but it can hold a good amount of weight due to its design.