The red Haukland 7-in-1 Photography Jacket Red Men's Largefrom Haukland 7-in-1 Photography Jacket Red Men's Largeis three separate layers that can be worn in seven different combinations. There are 27 pockets between the three jacket layers, including the mini photo bags. Each jacket can be worn separately as well as together, depending on the conditions you're in.

Waterproof Outer Jacket    Padded & Quilted Inner Jacket    Fleece Base Layer    Windproof, Rainproof, and Breathable    Microfiber Cloth Pocket in Each Jacket    3 Mini Photo Bags Included

The first layer of the 7-in-1 jacket can be worn alone on chilly fall or spring days. It is cut longer than most standard fleece jackets to help keep you covered and warm. The fleece fabric protects against light rain and moves moisture from the inside to the outside of the jacket. In heavier rain, you can zip this fleece layer into the outer jacket. You can attach both sleeves and the collar of this jacket to the outer jacket with eyelets and buttons.

This first layer jacket has eight pockets including five pockets in the mini photo bag. There are two large front pockets and one pocket in the left sleeve with an elastic strap and metal clip for a microfiber cleaning cloth. The mini photo bag in this layer is made from mesh.

The second layer of the 7-in-1 jacket is a padded, quilted jacket with a hood and a stylish checker design. This jacket can be worn by itself on chilly days without rain. It also zips into the outer jacket for an additional layer of warmth on cold and windy days. You can connect the hood and sleeves of this jacket to the outer jacket with buttons and eyelets. It is cut slightly longer than other padded jackets but doesn't show under the outer jacket.

This second layer jacket has eight pockets when you count the mini photo bag. There are two large front zippered pockets and one microfiber cloth pocket with an elastic strap and metal clip in the left sleeve. The mini photo bag has a waterproof film to protect your equipment in snow or rain.

The third layer of this jacket is lightweight, water and wind resistant with a rain column of 6000mm. It is made from tear-resistant 228T nylon-treated fabric. The interior mesh enhances the jacket's comfort and breathability while providing air circulation. The zippers under the arms provide extra ventilation if desired. Additionally, this outer jacket has a welded 2-way YKK zipper for extra water and wind protection. There are also elastic bands in the hood for a more secure fit and wrist wind stoppers to seal the jacket and prevent unnecessary heat loss. You can also tighten the sleeves with the hook-and-loop adjustment. The front side of the hood is cut longer to protect your camera and viewfinder in inclement conditions.
There are 11 different sized pockets throughout this jacket including the five pockets in the mini photo bag. There are two chest pockets designed to carry lens caps, two large pockets with hook-and-loop closures for filters up to 100x150mm or your Haukland 3-in-1 gloves, and an interior top left pocket for a slim wallet, your passport, or phone. There is also a left-sleeve pocket with an elastic strap and metal clip for your lens cleaning cloth.

Photographers have worn the Haukland 7-in-1 jacket from anywhere around 77 °F in the rainforests of Costa Rica to -4°F in Finland, as well as in winds over 100km/H.

• Layer 1 has 5 pockets, made entirely of mesh for comfort.
• Layer 2 has 5 pockets and a waterproof film so you can drop the jacket in the snow without exposing your electronic equipment.
• Layer 3 has 5 pockets with labeled memory card & battery pockets, plus two additional large pockets for drone batteries, power banks, and other accessories. This area is reinforced with a waterproof film on the exterior side to provide extra protection for your electronic equipment. On the interior side, the pockets are made of mesh.

Related Questions and Answers

Q: 1. Will this jacket fit on the Canon EOS M6 camera?

A: Unfortunately no, this is custom-fitted for the Canon EOS M5.

Q: 2. Can you verify that this case does not fit a DSC-HX80? The case number for that camera is listed as LCJ-HWA and this case is a hybrid LCJ-HWA; LCJ-HWB. Thank you.

A: This case will fit Sony DSC-HX80

Q: 3. Do you have to fully detach the cover to use the camera or does it just hang down when open?

A: It just hangs down when open. No need to detach.

Q: 4. is this compatible with the LB-T01 Lens Barrier?

A: The Lens Barrier and Silicone Jacket are not compatible.

Q: 5. Can the suction cup be used to remove lens elements?

A: No, the suction cup on the Sensei Bulb Air-Blower is meant to stand the bulb up and nothing more.

Q: 6. Is this case fit the HX99?

A: Hi Marcus, Yes, that case fits with DSCHX99. Regards, Jen

Q: 7. does it make a whistle sound? looking for one that is silent.

A: It does not make a whistle. However, it is not silent for it makes whooshing sounds. I don't know of a rubber blower that is silent. I would suggest a camel hair brush for silent operation.

Q: 8. is this compatible with the Olympus LG-1 LED Macro Ring Light?

A: It is not possible to use this case along with the LG-1 at the same time.

Q: 9. Does this pack come with a rain cover?

A: Yes. The Haukland x Evoc Photo Backpack (Black, 18L) comes with a rain cover.

Q: 10. How does it compare with the Giottos rocket blower? The Giottos is described as having a valve that allows only clean air to be blown out. The blower after all could suck in dust from the environment and blow it onto a camera sensor. I am wondering if Giottos has an advantage over other blowers

A: Sensei, Giottos... What difference at this point does it make? Thoreau gave the best advice: Simplify, simplify. Simpler is always better...and I've used the Sensei blower in some relatively dusty environments (Kenya's Masai Mara in February, Chile's Atacama Desert. Lastly, if you are cleaning your camera sensor other than very infrequently...you are cleaning it too often or you've got a major problem.