The 6" Gator Headliner 1/4" Right Angle Patch Cable 6"from Gator Headliner 1/4" Right Angle Patch Cable 6"is an ultralow capacitance cable that allows more signal flow and avoids frequency roll-off. The cable has a fine stranded 99.99% oxygen-free copper tin-plated conductor with braided shielding. Other features include a chuck-style strain relief cable clamp for secure wire connections.

22 AWG Conductor    Ultralow Capacitance    Oxygen-Free Copper Tin Plated Conductor    Chuck-Style Strain Relief Cable Clamp

Related Questions and Answers

Q: 1. Does this cable support 4k?

A: This cable supports 4K.

Q: 2. Will this cable support 4K @ 60Hz?

A: Yes. This cable will support 4K, 60 Hz.

Q: 3. What is the height?

A: The manufacturer has not provided dimensions for height.

Q: 4. It seems as if the description is incorrect. Timecode cable is not a Fisher connector usually but BNC or similar. Is there a mix up?

A: On the RED KOMODO, the 9-Pin Extension port carries the Timecode signal. If you need BNC for Timecode, get the RED DIGITAL CINEMA KOMODO Expander Module. https://www.bhphotovideo.com/c/product/1570780-REG/red_digital_cinema_720_0058_komodo_expander_module.html?sts=pi&pim=Y

Q: 5. Will this carry a 4k signal to the shogun from a sony a7s?

A: yes

Q: 6. Work with rode videomicro to camera or phone?

A: No, the SC10 cable is not compatible with the VideoMicro which has a standard 3.5mm TRS output. The SC10 will work with the VideoMic NTG. For the VideoMicro, you can use the Rode SC7 (B&H # ROSC7) which has a standard 3.5mm TRS connector on one side and connects to the mic's output and a 3.5mm TRRS connector on the other side to connect to a smartphone. The cable that comes with the VideoMicro is the SC2 (B&H # ROSC2) and it has standard 3.5mm TRS connectors on both ends, This is the cable to use for connecting the VideoMicro to cameras and recorders.

Q: 7. There is a bump in the cable. What is it for?

A: It is a capacitor that helps eliminate any interference/noise picked up along the cble.

Q: 8. Will this work with a movcam cage on A7s? Some plugs are too thick to fit.

A: Atomos is aware that these cables are often used with cages that have very little clearance for jacks. The connector on the micro side couldn't be much smaller and have proper insulation. We believe this will fit the a7s movcam slot. Without a physical test, there cannot be 100% certainty. You do have our 30 day return policy.

Q: 9. Hi. Is the "micro side" Lshape of the cable long enought to reach all the way through a smallrig hdmi clamp mounted on a cage? Is there a non L shaped version?

A: You might want to go with a standard micro HDMI to HDMI. We have a variety of micro HDMI to HDMI that should work for you.

Q: 10. Does this cord work with rode video mic pro+? I lost mine.

A: If connecting your Video Mic Pro+ to a camera you need this: https://www.bhphotovideo.com/c/product/1409621-REG/rode_sc2_3_5mm_trs_patch_cable.html?sts=pi-ps&pim=Y If using with a smartphone then it's this: https://www.bhphotovideo.com/c/product/1048152-REG/rode_sc7_trrs_iphone_cable_for.html