The Middle Atlantic Mobile Videoconferencing Cart for 42-55" Displaysis a natural nickel colored welded steel frame designed to hold either one or two displays with a maximum VESA pattern of 600. Weight capacity is a maximum of 550 lb for two monitors or 250 lb per monitor. It features an adjustable 12 x 8" camera mount on top as well as three racks spaces in the base with a usable depth of 23.2" on the bottom two spaces and 16" on the top space. There are two locking casters to keep the cart stationary. There's also a three space mid-mount rail. The base cover is lockable and features a soft hinge.

Additionally, there's a four space vertically oriented adjustable rackrail in the lower frame. Front AVIP and UCP panels and a 3" cable grommet provide connection options. The camera mount between displays is adjustable from 8.2 to 9.8". There are also ten UHF/VHF antenna knockouts. Four casters, two rear lockable, allow ease of mobility. The cart includes a toolless LeverLock for shelving or cable management. Extra LeverLocks are available as options.

Power is provided by a 120 VAC / 60 Hz, 15 A power strip with surge protected 8 outlets and a 10' SignalSAFE cord. The unit is GREENGUARD certified for air quality.

Holds Large Displays up to VESA 600    Camera Adjusts Between Displays    Toolless LeverLock Mounting Plate    Frame Capacity of 4 Rackspaces    Base Capacity of 3 Rackspaces    Front AVIP/UCP Panels    Front Knockouts for UCP/AVIP Connectors    Ten Knockouts for UHF/VHF Antennas    Four Casters / Two Lockable    3" Cable Grommet/Non-Locking Casters

Related Questions and Answers

Q: 1. could a speakerbar be mounted? Extra shelf?

A: Gabor does not include any additional shelving as an accessory to this unit. You may, however, directly mount a soundbar to a TV using a mount or adapter.

Q: 2. What is the maximum possible height of the lower a/v shelf?

A: The lower shelf can go as high as the entire height of the stand so long as nothing is blocking it from going up, and the screws that secure it to the poles are undone.

Q: 3. How well does this support touch screen TVs? Does it wobble while the TV is being written on? Weigts at the base required?

A: The Gabor Flat Panel TV Cart for 55-85" Displays BH #GAFPC85 will not wobble within its payload restriction of 200 lbs. For a touchscreen monitor it would be strongly recommended to lock the casters and weight the base with sandbags.

Q: 4. Can this cart handle a 22" monitor with 100x100 VESA mount? Will mounts extend outside monitor or can these be removed?

A: This can handle any 100x100 VESA screen, however the mounting brackets may extend outside of a 22" screen.

Q: 5. will this hold a small color laser jet printer?

A: The shelf is 32.0 x 12.0 and can hold 50lbs. Most small laser jet printers are under 50lbs, and if the printer fits in that footprint then it's good.

Q: 6. Hi. We've got this cart and will be mounting a Samsung BE82T-H display to it. The Samsung manual says the mounting screws have to be 20-22mm. The only screws included with the cart that fit the display are the M8x25mm screws. Even with the screws through the mounting pieces, the length of the remaining screw is close to 23mm. We don't want to chance damaging the display, so I assume we'd then use washers. However, the included washers are too small for the M8 screws to fit through. Would it be acceptable to purchase washers that do fit at a hardware store? It seems to make sense, but I just want to make sure we're okay doing this. Thanks!

A: Yes you will be okay using different washers that will fit your screws.

Q: 7. if the height is raised to, say 6ft, is it measure from the floor to the middle of the TV?

A: The minimum and maximum height of the stand is measured from the floor to top of the mount.52.8 to 65" / 134 to 165 cm. The TV height varies depending on the TV

Q: 8. Is the shelf optional? Can I use this safely without the shelf installed?

A: The shelf does not need to be attached to the Peerless-AV Paramount Universal Cart for 55-86" Displays with Shelf (B&H # PEPR560M). The shelf is designed primarily to hold the media source device that is connected to the mounted display, such as a computer or smart streaming device. It does not contribute to the overall stability of the display mounting functions.

Q: 9. Hi, what is the minimum height of the stand with the screen on it?

A: The Helder Flat Panel Cart and Stand for 13 to 42" Displays BH #HEFPCS may be adjusted from 32.3 to 52" / 82 to 132.1 cm in height.

Q: 10. it says the feet are adjustable. How are they adjustable? Also how many inches are the feet on each side?

A: The Helder Flat Panel Cart and Stand for 13 to 42" Displays (BH # HEFPCS) features removeable feet that will adjust no more than one inch. They are adjustable for leveling purposes only. They can be used when the included casters are not practical or desirable.