The black/blue Haukland 7-in-1 Photography Jacket Black Blue Men's Mediumfrom Haukland 7-in-1 Photography Jacket Black Blue Men's Mediumis three separate layers that can be worn in seven different combinations. There are 27 pockets between the three jacket layers, including the mini photo bags. Each jacket can be worn separately as well as together, depending on the conditions you're in.

Waterproof Outer Jacket    Padded & Quilted Inner Jacket    Fleece Base Layer    Windproof, Rainproof, and Breathable    Microfiber Cloth Pocket in Each Jacket    3 Mini Photo Bags Included

The first layer of the 7-in-1 jacket can be worn alone on chilly fall or spring days. It is cut longer than most standard fleece jackets to help keep you covered and warm. The fleece fabric protects against light rain and moves moisture from the inside to the outside of the jacket. In heavier rain, you can zip this fleece layer into the outer jacket. You can attach both sleeves and the collar of this jacket to the outer jacket with eyelets and buttons.

This first layer jacket has eight pockets including five pockets in the mini photo bag. There are two large front pockets and one pocket in the left sleeve with an elastic strap and metal clip for a microfiber cleaning cloth. The mini photo bag in this layer is made from mesh.

The second layer of the 7-in-1 jacket is a padded, quilted jacket with a hood and a stylish checker design. This jacket can be worn by itself on chilly days without rain. It also zips into the outer jacket for an additional layer of warmth on cold and windy days. You can connect the hood and sleeves of this jacket to the outer jacket with buttons and eyelets. It is cut slightly longer than other padded jackets but doesn't show under the outer jacket.

This second layer jacket has eight pockets when you count the mini photo bag. There are two large front zippered pockets and one microfiber cloth pocket with an elastic strap and metal clip in the left sleeve. The mini photo bag has a waterproof film to protect your equipment in snow or rain.

The third layer of this jacket is lightweight, water and wind resistant with a rain column of 6000mm. It is made from tear-resistant 228T nylon-treated fabric. The interior mesh enhances the jacket's comfort and breathability while providing air circulation. The zippers under the arms provide extra ventilation if desired. Additionally, this outer jacket has a welded 2-way YKK zipper for extra water and wind protection. There are also elastic bands in the hood for a more secure fit and wrist wind stoppers to seal the jacket and prevent unnecessary heat loss. You can also tighten the sleeves with the hook-and-loop adjustment. The front side of the hood is cut longer to protect your camera and viewfinder in inclement conditions.
There are 11 different sized pockets throughout this jacket including the five pockets in the mini photo bag. There are two chest pockets designed to carry lens caps, two large pockets with hook-and-loop closures for filters up to 100x150mm or your Haukland 3-in-1 gloves, and an interior top left pocket for a slim wallet, your passport, or phone. There is also a left-sleeve pocket with an elastic strap and metal clip for your lens cleaning cloth.

Photographers have worn the Haukland 7-in-1 jacket from anywhere around 77 °F in the rainforests of Costa Rica to -4°F in Finland, as well as in winds over 100km/H.

• Layer 1 has 5 pockets, made entirely of mesh for comfort.
• Layer 2 has 5 pockets and a waterproof film so you can drop the jacket in the snow without exposing your electronic equipment.
• Layer 3 has 5 pockets with labeled memory card & battery pockets, plus two additional large pockets for drone batteries, power banks, and other accessories. This area is reinforced with a waterproof film on the exterior side to provide extra protection for your electronic equipment. On the interior side, the pockets are made of mesh.

Related Questions and Answers

Q: 1. Does it fit EOS REBEL XSI?

A: No, the EH29-CJ body jacket is for the Canon EOS M5.

Q: 2. In the United States MARINE CORPS this camouflage pattern is known as 'Digital Desert,' and as a retired MARINE; Disabled War Veteran i am a big fan of this 'camo' pattern, everything in my home is camouflaged. I have found the medium and large size camo patterns. Do you have the small and x-large sizes available? Thank you for your time and your help.Take care and GOD Bless!!!SuperSniperSal

A: Yes, we have both the extra small and extra large.They are listed below. The BH number for them is B&H # LELCLPXLWDC and B&H # LELCLPXSDC.

Q: 3. Will this fit the Tamron 15-30 f/2.8 lens?

A: No the Tamron 15-30mm f/2.8 lens will not fit in this LensCoat LensPouch (Medium Wide, Black).

Q: 4. Where can I find replacement parts for the Photoflex 2214 G?

A: You will only find parts for the Photoflex light stands from Photoflex. They have been purchased (initially they were simply going out of business), and should be able to handle your request for parts in a timely manner. Just go to their website and find contact info. I have several of those stands also, so I can certainly understand your desire to put that good stand back to work!

Q: 5. Does it fit the size of Canon 5D Mark 4?

A: No it does not fit 5d.This is for the Canon m5 mirrorless camera. It fits the m5 very well

Q: 6. Will this fit a Canon RF 24-70 f/2.8 IS? The lens with hood reversed is a bit over 6". If not, what size do you suggest?

A: The large-wide size of the LensCoat LensPouch would be suitable for a Canon RF 24-70mm f/2.8 L IS USM Lens.

Q: 7. Will the Canon 55-250mm lens (3 dia x 5.5 long) fit with the bag fully closed?

A: my Canon 75-300mm which is just under 6 fits snuggly. These are great bagsa bit bulky depending on your space.

Q: 8. Do you have to fully detach the cover to use the camera or does it just hang down when open?

A: It just hangs down when open. No need to detach.

Q: 9. How do you attach the strap to the outer casing ?

A: As seen on the B&H website, the strap has a collar and a buckle (coming from the tip of the strap and up) on each strap. I slipped the end of the strap through the metal loop on the covering from the outside to inside then bring the end through the collar and now go into the buckle from underneath. That held pretty good for me. It helps to have some excess strap loose in the buckle from the initial pass through so when you bring the strap back through after going through the metal loop and collar, you have a little more wiggle room to get the strap back through the buckle. I had the end of the strap about 2 out of the buckle. Although the strap is great, I have since gotten a Peak Design leash to replace it cause sometimes I don't want the strap in the way. Hope this helps.

Q: 10. Will this jacket fit on the Canon EOS M6 camera?

A: Unfortunately no, this is custom-fitted for the Canon EOS M5.