Provide up to all-day power for your pro camera or lighting unit with the Frezzi 150Wh V-Mount Battery with LED Meterfrom Frezzi. Housed in an impact-resistant casing, this V-mount battery handles power draws up to 15A and provides overload and over-discharge protection. It can also power accessories and mobile devices via one USB-C, two USB-A, and four D-Tap outputs, all with protective rubber covers. The large, color smart screen enables you to easily view the battery's remaining power and other status factors.

14.8V, 150Wh Battery    10.4Ah, Supports up to 15A Draw    Color Smart Screen    1 x USB-C, 2 x USB-A & 4 x D-Tap Ports    For Pro Cameras, Lights, Accessories    Overload & Overdischarge Protection    Durable, Impact-Resistant Form

This reliable V-mount battery sports compatibility features necessary to keep all of your devices ready and powered on set. Four 14.4V D-tap power outputs are available for up to 10A of accessory power, plus operators can charge their personal devices or some compact LED fixtures with the 5V USB outputs. For larger camera rigs that require higher voltage outputs, two Frezzi 150Wh batteries can be interlinked using the Dual Brick Adapter for 30V operation (available separately).

For advanced tracking of your battery's status, Frezzi has a built-in LED capacity meter to help to make sure your shoot is uninterrupted, especially in the field when plug-in power is not readily available. Built-in safety features, like overcharge and overcurrent protection, help maintain the lifespan of both the battery and the equipment for which it delivers power.

Related Questions and Answers

Q: 1. Can the headphones be used on YAMAHA digital pianos?

A: The headphones mainly use a mini 1/8" plug, but they will come packaged with a 1/4" adapter to connect to a any Keyboard that has a 1/4" headphone input (or 1/8" input).

Q: 2. What is the difference between Red Compatible and the regular Blue Label IndiPRO batteries?

A: The Red compatible batteries are tested and approved by Red to be used on their cameras. The blue labels are no tested by Red.

Q: 3. Does this works on the Litepanels Gemini 1x1?

A: This particular plate is for the Astra series or older. The compatible plate for the Gemini 1 x 1 is the Litepanels Battery Plate for Gemini 1x1 (V-Mount), BH # LI9003704. https://bhpho.to/3aR4lA6

Q: 4. Does this work for all of the Astra panels including the x4 and x6?

A: YES It does This mounts directly to the Astra yoke with the included screws

Q: 5. The Lume Cube Panel says it puts out 1600 lux at 1.6 feet. This says 1200 lumens. How do you compare these kinds of lights?

A: Lux is a measure of illuminance, the total amount of light that falls on a surface Lumens is a measure of luminous flux, the total amount of light emitted in all directions. Lux is important for knowing how bright a particular surface appears. This is the crucial metric if you want to know how bright a surface will appear, such as a tabletop, reading material or photography subjects. Without a sufficient lux level, it can be difficult to read or take good photographs. Common lux levels are listed below: Lux is a measure of how much light falls on a particular surface, and can be the result of multiple light bulbs and even daylight mixed in. Lumens is important for knowing how much light a single light source emits. This is useful for comparing the total amount of light a bulb emits, but depending on its light distribution and space size, whether it is "enough" for a space or task cannot necessarily be determined. One lux is equal to one lumen per square meter (lux = lumens/m2). Essentially, as light travels from the emitter, it will disperse throughout an area. The further the light has to travel the more it will be dispersed. Therefore, the amount of lux in an area or on a surface can vary depending upon the distance the light travels and the angle at which it is dispersed. Where the lumens provided by a given emitter are the same, light that travels less distance and/or is more narrowly focused will appear brighter because lux are concentrated in a smaller area than light that has traveled a greater distance and has been dispersed over a wider area.

Q: 6. Is there any issue in mounting an Anton Bauer Dionic Li-Ion HC 91WH battery on this instead of stacking two PAGs? We have several anton bauers but need longer running time and don't necessarily want to give up on Anton.

A: According to PAG this would not work. The PAG batteries communicate with each other when stacked, the Anton Bauer Batteries do not have the communication protocol as it is specific to PAG batteries. The good news is you can still use your Anton Bauer chargers and stack the batteries for charging.

Q: 7. Is this compatible with the Godox VL150 and will it provide full power?

A: Yes, the Pawa VM-150-T V-Mount Battery with D-Tap Charger (150Wh) is compatible with the Godox VL150 Daylight LED Monolight.

Q: 8. What is the estimated run time for an ARRI Mini LF?

A: For questions regarding Arri equipment please contact our Studio Sales team at TheStudio@bhphoto.com

Q: 9. Will this work with the Sony FX9?

A: Yes as long as you have the proper v-mount plate or/and extension.

Q: 10. What is the cheapest GM charger, that can charge these batteries? (Mistakenly bought one that didn't work)

A: The best low-cost choice to charge the Anton/Bauer Dionic XT 150Wh Gold-Mount Lithium-Ion Battery would be the model listed below: Anton/Bauer GM2 Dual-Bay Charger with 4-Pin XLR Output (Gold Mount) BH #ANGM2DGMC