The black Electro-Voice ELX200-18SP is an 18” 1200W powered subwoofer designed to provide dependable low-frequency amplification, easy installation, and convenient control for sound engineers and performers in live stage applications, theaters, DJ setups, and mobile rigs. It features 1200W of Class-D amplification, which drives an 18” woofer to produce a frequency range of 40 to 145 Hz.

Route a balanced source such as a stereo mixer output via two XLR-1/4” combo jack inputs, then utilize the two XLR Link outputs to connect to full-range speakers. A rear-panel knob and LCD allow access to master volume and the on-board DSP functions, which include three easy-setup presets, five user-programmable presets, adjustable low-pass frequency, and metering. Adjust parameters via the single-knob interface and LCD, or control the subwoofer via Bluetooth.

Its plywood enclosure and steel grille ensure durability and stability. Built-in carry handles allow easy loading and unloading at gigs. Mount a full-range speaker above the subwoofer via the top-panel M20 threaded hole. The ELX200-18SP ships with a power cable.

For Live Stage, DJ Setups, Mobile Rigs    18" Woofer    40 to 145 Hz Frequency Range    1200W of Class-D Amplification    Two XLR-1/4" Combo Jack Inputs    Durable Nylon Subwoofer Padded Cover    Protects from Scratches, Dust, Moisture    Adjustable Speaker Pole    Height Adjustable from 3.4 to 5.9'    Premium XLR Cable

18" woofer

40 to 145 Hz frequency range

1200W of Class-D amplification

2 x XLR-1/4" combo jack inputs

2 x XLR Link outputs

Adjustable low-pass frequency at 80/100/120/150 Hz

On-board DSP and master volume control

Three preset modes and five user-programmable presets

Single-knob user interface and LCD

Supports configuration via Bluetooth

M20 thread for pole-mounting a speaker on top of subwoofer

Integrated carry handles

Related Questions and Answers

Q: 1. What type of batteries does this charge?

A: The RE3-ACC-BC2 Two-Slot Battery Charger is designed to charge NiMH rechargeable AA battery cells for Electro Voice RE series Handheld and bodypack transmitters.

Q: 2. Am having issues with my EV R300 set The RF signal is OK but no AF signal yet the channel on the receiver and transmitter is OK I have tried even changing the frequency but no help. What could be the problem? Regards

A: It could be a problem with the microphone itself, or MUTE may be slected; please check connections and replace mic if necessary. EV help: A: R300 how-to videos are posted at http://www.electrovoice.com/evtv.php?category=knowledge Factory Service (North America) If factory service is required, call service center for RMA# and shipping instructions: EV Audio Service c/o Bosch Security Systems, Inc. 8601 East Cornhusker Highway Lincoln, NE 68507-9702 U.S.A. Tel: 402-467-5321 or 800-553-5992 Fax: 402-467-3279 Enclose a note describing the problem along with any other pertinent information and how to contact you.

Q: 3. Will this pop filter fit a Rode NT1000?

A: No, the On-Stage Pop Blocker for Electro-Voice RE20 and RE320 Microphones (Version 2) is not compatible for use with the RODE NT1000 Studio Condenser Microphone. The On-Stage Pop Blocker is designed specifically for the Electro-Voice RE20 and RE320 models, which are both front-address style microphones, while the NT1000 is a side-address microphone. You can use the Auray PFNY-6 Nylon Pop Filter with Gooseneck and C-Style Clamp for Mic Stands and Booms (B&H # AUPFNY6), the 512 AUDIO Microphone Pop Filter with Gooseneck C-Clamp (B&H # 51512POP), the sE Electronics Dual Professional Pop Screen (B&H # SEDPP), or any similar pop filter which will cover the side of the microphone that picks up the sound.

Q: 4. Will this fit for Rode Procaster? If not is there any suggestion that it's small like this one?

A: Yes, the On-Stage Pop Blocker for Electro-Voice RE20 and RE320 Microphones (Version 2) is compatible for use with the Rode Procaster Broadcast Microphone.

Q: 5. I understand it's 2.5Gb/s but is that upload as well?

A: You're actual upload speeds will depend on your internet service, but a 2.5 Gb/s modem can handle 2.5 Gb/s of throughput up or down.

Q: 6. Is the sync terminal cover (to cover bottom plate contacts when battery grip is not connected) compatible with the XH-1?

A: The sync terminal cover in the Fujifilm CVR-XH kit is to cover the flash sync connection on the XH series cameras.

Q: 7. Does this remote have a headphone jack?

A: This remote doesn't have a headphone jack.

Q: 8. What's the upload speed on this modem?

A: This Netgear Nighthawk 2.5 Gb/s Cable Modem for Xfinity Voice supports up to 2.5 Gb/s internet service.

Q: 9. Will this fit a Heil PR-40?

A: Because the On-Stage Pop Blocker for Electro-Voice RE20 and RE320 Microphones is designed specifically for the EV mics mentioned in its title, it may not work well with the Heil Sound PR 40 Dynamic Cardioid Front-Address Studio Microphone. This is due to the smaller diameter of the PR 40 and the lack of adjustment on the pop blocker's clasp.

Q: 10. Is the sync terminal cover compatible with the XT5? I lost mine and I'd love to know.

A: Yes you can use the Sync terminal cover available with FUJIFILM CVR-XH Cover Kit for your Fujifilm XT5 mirrorless camera body.