This PDMOVIE D-Tap to 6-Pin Cable for MOTOR PRO/AIRfrom PDMOVIE D-Tap to 6-Pin Cable for MOTOR PRO/AIRis designed to power your MOTOR PRO PD-RP or AIR PD-MX lens control motor using a D-Tap power source. The cable measures 11.8" in length and provides a 6-pin connector for the motor to be powered via a D-Tap source such as a high-capacity V-mount or Gold mount battery.

Powers Motor via D-Tap Source    D-Tap to 6-Pin Power Cable    Cable Measures 11.8" in Length    For MOTOR PRO PD-RP and AIR PD-MX

Related Questions and Answers

Q: 1. How well would this work with an 85mm lens?

A: The PDMOVIE LIVE AIR 3 Smart LiDAR Wireless Focus Lens Control Kit (Basic) works very well with most focal lengths, including 85mm.

Q: 2. I wanna know if this cable work with a standard powerbank... I mean, Can I plus the micro usb to the output of my powerbank and the d-tap into the motor wheel?

A: It cannot as this is designed for use with the Nucleus-Nano which has a USB Micro input for power. If you wanted to power the Nucleus Nano from a USB Power bank you would need the USB Micro to USB Micro Cable instead, BH #TIWLCT04PC. https://bhpho.to/3iDaTWC

Q: 3. What is the most far focal lengths which will still work in full frame & super 35?

A: The PDMOVIE LIVE AIR 3 Smart LiDAR Wireless Focus Lens Control Kit (Deluxe) , has a maximum focusing distance of 16.4 feet. The focal length and sensor size are not factors in this calculation.

Q: 4. How many watts does this output? Need a clearer photo of the label on the back.

A: The SmallRig USB-C to D-Tap Power Cable for Wireless Follow Focus Motor supports USB-C PD output of 18W.

Q: 5. Can you adjust the resistance of the focus controller?

A: There is no resistance control adjustment on the PDMOVIE LIVE AIR 3 Smart LiDAR Wireless Focus Lens Control Kit.

Q: 6. Will a matte box block the view of the Lidar camera?

A: That would depend on the size of the matte box and where you mount the PDMOVIE LIVE AIR 3 (BH #PDPDLAFXSMRT), but yes, in many situations a matte box could interfere with the lidar functionality.

Q: 7. Can one turn on/off auto focus without first focusing at minimum focus?

A: The PDMOVIE LIVE AIR 3 Smart LiDAR Wireless Focus Lens Control Kit PDL-AFX-S/PDL-AFX-RA-S must rotate the controller to the position where it stays to activate or cancel autofocus. Therefore, PD Movie generally recommends that users only set 4 autofocus lens data, leaving a blank channel for pure manual wireless control, which will not be interfered by the controller staying at the position of the nearest focus point. If you want to switch between manual and automatic control through button commands on the controller, or motor, it is not possible. In essence, it also does not support completely seamless switching between manual and automatic. In addition, there is a new model being release PDL-AFX-RA-SP next month which is a purely manual wireless control mode, which can be set independently.

Q: 8. Could this also power a camera using an external battery?

A: No, the Tilta D-Tap to USB-C Power Cable for Nano II Follow Focus Motor will not power a camera being powered by an external power source.

Q: 9. Could this cable power The Osee 5" monitor that has a micro USB Type C (DC in 5-17V) ?

A: The Tilta Micro-USB to D-Tap Motor Power Cable for Nucleus-Nano should work with the OSEE BH #OST5PLUS. The cable outputs 12+ volts of power which fits the displays requirement of 5-17V.

Q: 10. Does this cable have voltage regulator inside ? Or its delivers full D-tap voltage?

A: This product is specifically designed for the Nucleus-Nano and will provide the proper voltage needed for it.