Pdmovie Motor Drive Cable For Motor Air & Pro (328')

Product Code: eq132324
Availability: In Stock

$2,157.00 $3,062.94

Qty

17 reviews Write a review

Description
Reviews (17)

Connect your MOTOR AIR or MOTOR PRO motors using this PDMOVIE Motor Drive Cable for MOTOR AIR & PRO (328')from PDMOVIE. The cable measures 328' in length and connects a controller or another slave motor using its 6-pin connectors at each end.

Control MOTOR AIR or PRO 6-Pin to 6-Pin Drive Cable Slave Cable to Chain Motors Cable Measures 328' in Length

General
Compatibility	PDMOVIE MOTOR AIR / MOTOR PRO
Inputs / Outputs
Connector 1	1x 6-Pin LEMO-Type Male
Connector 2	1x 6-Pin LEMO-Type Male
Physical
Cable Length	328.1' / 100 m

Related Questions and Answers

Q: 1. Can I use this with a Sony 24-70 GM (version 1)? Or is that considered a servo/focus-by-wire lens?

A: The Sony FE 24-70mm f/2.8 GM Lens is a focus by wire lens and can be an issue calibrating with the edelkrone FocusPLUS PRO Focus Motor.

Q: 2. Would I be able to use this on the zoom function and not the focus?

A: As long as the zoom ring doesn’t move forward or back during focal change, it should work. You would just put the gear around the zoom ring instead of the focus ring. The smoothness (ease to turn) will also effect the motor. Zoom would need to be similarly smooth as a focus ring.

Q: 3. what type of usb connector is needed to pair with nikon d750?

A: Youll need to get the zhiyun control cable for Nikon.

Q: 4. Do we need to buy a battery plate for this? Or do we just need to buy the battery?

A: You can power the motor using an optional LP-E6 battery or with an optional AC/DC adapter.

Q: 5. Can this be attached on either side of the lens?

A: Yes, the edelkrone FocusPLUS PRO motor can be attached to any part of the lens allowing it to make contact with the gears.

Q: 6. Will this pair with Headplus V1?

A: For the FocusPLUS PRO to pair, these setups should include one of the following edelkrone Heads: HeadPLUS v2, HeadPLUS v2 PRO, or either of the previous generation HeadPLUS (v1) or HeadPLUS (v1) PRO. FocusPLUS PRO does not pair with HeadONE or Pan PRO.

Q: 7. Can you control the focus motor by the dji wireless transmission monitor with the 4d grips?

A: The DJI Focus Pro Motor would be controlled exclusively with Ronin 4D grips and the DJI Focus Pro Grip hand unit.

Q: 8. Can this focus motor be controlled from the Tilta Advanced Ring?

A: Yes, the DJI Focus Pro Motor can be controlled via the Tilta Advanced Ring when connected to a compatible DJI gimbal.

Q: 9. Is the motor comparable with Tilta Nucleus-M?

A: The max torque of the DJI Focus Pro Motor is 0.6 N·m (8V), and the max speed is 300 rpm (8V). The max torque of the Nucleus-M motor at 14.8V is 2.5N·m. Overall, the Nucleus-M motor is more powerful and faster than the DJI Focus Pro Motor.

Q: 10. How does this motor compare to the one that ships with the RS3? I found the torque on that one to be too weak to drive lenses.

A: The has a 30% increase in Speed (Strength) torque over the motor included with the RS3. Motor speed increased by 30%; compatible with 15mm universal rods; built-in RF antenna; latency as low as 10 milliseconds. It will also work with the DJI Focus Pro kits. Compatibility DJI RS 3, RS 4 DJI RS 3 Pro, RS 4 Pro

Justin	27/09/2024
Improves the functions of the rs focus motor especially when combined with the rs4 gimbal’s function 5

Murad	25/09/2024
use easy. have not any problem 5

Manuel	01/09/2024
Chrosziel really stands for German quality and costumer service. I had the chance to test this and I can say it's a very strong motor, ideal for crash zooms but also for slow, smooth zooms on cine lenses! It also has a Photolens-Mode but for that it raises the minimum zoom speed. Also you dont need to own a FX6 or any of the other supported Sony cams. Just plug your LANC-Controller into the motor and you can use it with any camera. The Chrosziel Team also was very helpful with any questions I would have and offered great and fast costumer service which is something I value a lot! 5

justin	13/08/2024
Love this whole set-up. It's incredibly useful and this cable to work with it all is no exception. 5

Hakon Freyr	06/08/2024
Amazing addition to the edelkrone setup 5

Dimitrios	27/06/2024
Epic Product. It allows me to focus with the click of a button. One less headache while filming. 5

Marc	17/06/2024
This is a great tool to use focus on my Zhiyun Crane 2 gimbal. I ordered two more because the original one I've had for years started to struggle to connect with the microUSB port. I could have been more gentle with the microUSB connection and also it got plenty of use! If you do purchase this, I recommend updating the servo follow focus firmware on it, for AB point compatibility, and using the original Zhiyun USB cable when doing that update. (The cable that comes with the Crane 2). For some reason these older Zhiyun products don't like off brand cables. I'm not sure what's different about the Zhiyun cables but they work. 5

Mary	12/06/2024
Small and very lightweight. Easy to calibrate, but sometimes have to remove battery to re-calibrate. The thin controller that goes with is brilliant. And on/off switch would help. It’s tricky to figure out to push the battery to the side. 5

Matthew	02/06/2024
If you've purchased a Nucleus-M kit, you may notice the version of this cable included with the purchase is surprisingly stiff, which makes bundling/tidying it a challenge. This one doesn't have that issue. 5