Adjust the aperture of your cine zoom or prime lens using this Chrosziel Lensport Iris Motor 12-Pin Hirose Cine Lensesfrom Chrosziel Lensport Iris Motor 12-Pin Hirose Cine Lensesand its universal connectivity. The motor features an integrated 12-pin Hirose connector cable which inserts into your compatible camera's Hirose output port. Both control and power are delivered via this connection and camera-specific broadcast protocol with a torque of 0.5 N-m. Mount the motor on your camera configuration via a 15mm rod clamp and slide it along the rod to accommodate the length of your lens. Two 0.8 MOD gears in different diameters can be switched out to properly attach to your mounted lens.

Once the motor's cable is connected to the corresponding port of your camera, it will automatically calibrate itself and find the end-stops of your lens. If you'd like to use metadata calibration, put the motor into passive mode and turn your lens' aperture ring to confirm the position of T-stop 4 and T-stop 16. The motor can be used in remote control operation via the RCP or WebGUI of your connected camera. It can also be used with auto-iris functionality.

Universal Iris Motor    Mounts via 15mm Rod Bracket    Integrated 12-Pin Hirose Control Cable    Automatic Calibration    Remote Control via RCP or WebGUI    0.5 N-m Torque, Two Included Gear Drives

Related Questions and Answers

Q: 1. Any chance this would fit on a Fuji MK lens?

A: This product is designed for Angenieux EZ lenses. If you wish to have servo control with the Fuji MK lenses, please have a look towards Chrosziel Compact Zoom Control Kit for Fujinon MK Lenses B&H # CHCDMMKZ MFR # CDM-MK-Z. https://bhpho.to/2Ab9hR6

Q: 2. Does it fit the ff Meike prime lenses pl mount

A: Yes, Meike Hard 6-Lens Case for T2.2 Cine Lenses would also work with the PL Meike lens models.

Q: 3. Can I use this with my Angenieux 30-90mm and control it through a Blackmagic ATEM 4M/E Switcher software?

A: If the interface can work with a Canon CineServo or Fujinon Cabrio the MSU-1 will work. The MSU-1 has a standard 20 Pin interface.

Q: 4. hi, is this working w / DZOFilm Pictor 20-55mm and 50-125mm T2.8 Super35 Zoom Lens?

A: No, the Angenieux MSU-1A Single-Motor Cine Zoom Servo for EZ-1 and EZ-2 Lenses is designed specifically for the Angenieux EZ-1 and EZ-2 lenses; it is not compatible with DZOFilm lenses.

Q: 5. Is this lens remote compatible via direct wire input?

A: The three "wiring" options available are 20-pin Hirose - analog and remote Control; 12-pin Hirose - direct to lens port on camera; and a 6-pin LEMO - MBUS port.

Q: 6. Will this power the Canon 18-80mm T4.4 Compact Servo lens? If not, what will?

A: The IDX System Technology C-ZLPRO D-Tap to Hirose Cable for Canon CINE-SERVO Zoom Lenses will not work with the Canon CN-E 18-80mm T4.4 COMPACT-SERVO Cinema Zoom Lens. It takes power from the camera. It cannot take power directly.

Q: 7. Can I connect this via LBUS to Arri cameras/RIA-1 to make use of the run/stop feature?

A: The Angenieux MSU-1 Universal Cine Servo with 3 Motors & Wireless Module for EZ-1/EZ-2 Lenses (B&H# ANMSU1) does allow for start/stop, and the ARRI Radio Interface Adapter RIA-1 Set (B&H# ARRIA1S) does offer start/stop control. However, no cable is included for making a connection to the 4-pin LBUS port on the RIA-1.

Q: 8. Does this case accommodate s35 ef?

A: The Meike Hard 6-Lens Case for T2.2 Cine Lenses is designed to accommodate the 12, 16, 25, 35, and 50mm T2.2 Cine Lenses from Meike, The other lenses like the super 35 EF lenses would not fit in this case.

Q: 9. Is this case waterproof?

A: No, the Meike Hard 6-Lens Case for T2.2 Cine Lenses is not waterproof. It is rated at dustproof.

Q: 10. What is the zoom range?

A: Angenieux EZ1 30-90mm and EZ2 15-40mm T2