Lightweight and easy to install, Bubblebee Fur Wind Jacket for Rycote WS 4 Kit - Blackis a meticulously designed fur cover that offers superior protection from wind noise in extreme outdoor conditions. Its standout feature is the company's multi-pile faux fur, which is carefully chosen for its ability to diffuse wind noise while preserving the natural tones of your microphone.

The fur is designed in a gradual 3-length pattern that forms a wind-blocking barrier. This significantly reduces unwanted noise, resulting in pristine audio capture. Handmade in Denmark with the highest standards, The Fur Wind Jacket also fits seamlessly over your for Modular Windshield WS 4 Kit windshield basket, ensuring long-lasting use in demanding environments. The Fur Wind Jacket prioritizes both functionality and comfort for exceptional audio results.

Fits Rycote Modular Windshield WS 4 Kit    Sound-Attenuating 3-Length Fur Design    Acoustically Transparent Inner Fabric    Secure Attachment Mechanism    Made in Denmark

• The multi-pile faux fur consists of 3 different lengths of fur to slow the wind down gradually and creates a dense layer at the base, which acts as a barrier against wind, allowing you to capture clean audio in very windy conditions.

• Using the highest quality materials, The Fur Wind Jacket is designed to withstand rigorous use in the most demanding of recording environments for many years.
• The outer layer uses super soft strands of faux fur, while the inner layer of fabric is made using a non-abrasive, open material that's also acoustically transparent.
• This provides you with optimal wind protection, while retaining as much of the natural frequency response of your microphone as possible.

• The Fur Wind Jacket seamlessly integrates with your Rycote Modular Windshield WS 4 Kit basket. Its tailored design ensures a perfect fit, guaranteeing optimal wind protection without hindering the functionality or performance of your existing equipment.
• This model features a bespoke and secure attachment mechanism, allowing for quick and easy installation onto your Modular Windshield WS 4 Kit system.

Related Questions and Answers

Q: 1. Will this work with Rycote Super-Blimp for NTG shotguns? https://www.bhphotovideo.com/c/product/1246580-REG/rycote_010323_super_blimp_ntg_for_rode.html

A: Although specified for another windshield with a 17-inch length, the Rycote Hi-Wind Cover 4 Windscreen for Mono Modular Windshield 4 may also work with the Rycote Super-Blimp Kit for Rode NTG & Shotgun Mics, which has a specified length of 16 inches.

Q: 2. do we put this under the bobcat or is this seperate?

A: Hi there, Nicholas: thanks very much for your question. This product is intended for use on its own (i.e. without/in place of our fur Windjammers). You can use it over the basket and then apply a Windjammer on top, but this mostly leads to reduced high frequency content, and doesn't have that much benefit in terms of additional wind protection. The HWC is a good option on its own if you need something less obtrusive than fur, or don't want to suffer as much HF loss c. 6000 Hz. That said, our fur is renowned for its high level of acoustic transparency, so the other/more important aspect to consider might be whether you intend to use your windshield in very windy conditions. For that, chose a Windjammer; for moderate winds, the HWC would perhaps be a good bet. Hope that helps! MF.

Q: 3. Does it work for sennheiser mke600? If not, which one do you have that does fit it?

A: Yes, the Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics will fit mics with a diameter of 18 to 24mm, and the Sennheiser MKE 600 has a diameter of 20mm.

Q: 4. what is the Windscreen Length?

A: The Rycote Windshield # 4 is 330mm (13 ) in length, 440mm (17.3 ) with the end caps. Designed to accommodate mics up to 280m. (11 )

Q: 5. Will the Sennheiser MKE 600 work with this Blimp?

A: This blimp system is made specifically for stereo microphones, so would not be appropriate for a mono shotgun mic.. I would consider the Rode Blimp Windshield and Rycote Shock Mount Suspension System for Shotgun Microphones, BH #ROBLIMPR or the Rycote Windshield Kit for Sennheiser MKH416 & Other Select Shotgun Microphones, BH# RYWMKH416, which would both accommodate the Sennheiser ME66, with the K6 powering module.

Q: 6. Will this work for the Rode NTG-3?

A: Yes, the Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics (Large, Black) is compatible with the Rode NTG3 Shotgun Microphone.

Q: 7. Can this accomodate a Sanken CS-M1?

A: No. The Rycote WS 9 Modular Windshield Kit is not compatible for use with the Sanken CS-M1 Ultracompact Shotgun Microphone. The WS 9 Windshield is intended for use with microphones that are up to 3.9" long and the CS-M1 is just over that at 4.06" long. As a compatible option, you can use the Rycote Modular Windshield WS 1 Kit MZL (B&H # RYMWS1MZLKIT) which is intended for use with microphones that are 2.8 to 4.7" (71 to 120mm) long.

Q: 8. what is the country of origin for this item?

A: The country of origin for this item is the United Kingdom.

Q: 9. Can be used with Microphone Deity S-mic 2s?

A: The Rycote 086003 Windshield Kit 2 Complete Windshield and Suspension System is compatible for use with the Deity Microphones S-Mic 2S Short Shotgun Microphone. The windshield kit accommodates small microphones that measure 4.8 to 6.3" (121 to 160mm) in length with a diameter of 0.75 to 0.98" (19 to 25mm). The S-Mic 2S is 5.8" (148mm) long and has a diameter of 0.75" (19mm).

Q: 10. Can anyone tell me the thread size on the bottom of this unit (for boom pole, etc)? I need to adapt it to an old-school mic stand. Thanks!

A: Hi Jeff: thanks for your question. It's 3/8 . If your old-school stand is 5/8 , you can use the following adapter: a href= http://mymic.rycote.com/products/brass-3_8-m-to-5_8-f-screw-adaptor/. target= _blank http://mymic.rycote.com/products/brass-3_8-m-to-5_8-f-screw-adaptor/./a Basically, any 3/8 M to required size adapter will work. I hope that helps!