Key Digital Kd-Ip1022Enc-Ii 4K Av-Over-Ip Encoder Kvm Usb Audio

Key Digital Kd-ip1022enc-ii 4k Av-over-ip Encoder Kvm Usb Audio

Product Code: eq132989
Availability: In Stock

$3,456.00 $4,838.40

Qty

12 reviews Write a review

Description
Reviews (12)

The Key Digital KD-IP1022ENC-II 4K AV-over-IP Encoder KVM USB Audiofrom Key Digital KD-IP1022ENC-II 4K AV-over-IP Encoder KVM USB Audiofeatures PoE (power over Ethernet), low latency, scaling, support for up to DCI 4K30 video, USB KVM switching, and audio de-embedding. Designed for use with a verified network switch, this app-ready encoder can be mixed and matched with KD-IP822 and KD-IP922 encoders and decoders to create up to 16x16 video walls with a maximum total of 256 displays.

Interfaces include one GbE LAN port, one HDMI input, one HDMI pass-through output, one 6-pin block audio output, one USB-B port for routing up to four KVM devices, and three 3-pin block control ports.

4K Video Distribution for Video Walls HDMI Input & Output, PoE, 330' Range 6-Pin Block Analog Audio De-Embedding USB Source Routing for Keyboard/Mouse 1 x GbE LAN Port, Audio Preamp Up to 8-Bit, 4:4:4 DCI 4K30 Video 10.2 Gb/s Maximum Bandwidth DCI/UHD 4K Downscaling to 1080p or 720p Dolby & DTS Audio Format Support 3 x 3-Pin Block Control Ports

Inputs / Outputs
Video Inputs	1x HDMI
Audio Inputs	No
Video Outputs	1x HDMI
Audio Outputs	1x Block 6-Pin
Other I/O	1x RJ45 LAN 1x USB-B 2.0 1x Micro-USB Service 1x Block 3-Pin IR 1x Block 3-Pin RS-232 Input/Output 1x Block 3-Pin Remote
Expansion Slots	No
Format Support
Input Video Format	HDMI / RJ45 (8-Bit 4:4:4) DCI 4K at 24/25/30 fps UHD 4K at 24/25/30 fps 1080p 1080i 720p
Output Video Format	HDMI / RJ45 (8-Bit 4:4:4) DCI 4K at 24/25/30 fps UHD 4K at 24/25/30 fps 1080p 1080i 576p
Embedded Audio	HDMI/LAN (RJ45) Input HDMI/LAN (RJ45) Output
Standards
HDCP Support	Yes, Version 2.2
EDID Support	Auto-Detect
HDR Support	Not Specified by Manufacturer
DTS Compatibility	DTS-HD Master Audio
Dolby Compatibility	Dolby Atmos, Dolby Digital Plus, Dolby TrueHD
IP Streaming
Video IP Encoding	Proprietary: 1280 x 720 to 4096 x 2160 at 30p (125 to 850 Mb/s)
Hardware
Tally Light	Yes
Wireless	No
Power
Power I/O	1x Barrel (12 VDC at 1 A) Input
PoE Support	PoE 802.3af
Power Consumption	Power Supply: 20 W
Environmental
Operating Temperature	149°F / 65°C (Recommended)
General
Certifications	CE, RoHS, WEEE
Dimensions	6.25 x 3.1 x 1.1" / 15.88 x 7.9 x 2.8 cm
Weight	14.4 oz / 408 g

Encoder + Decoder systems create video walls with up to 16 x 16 with 256 total maximum displays
Create decorative video walls using displays of varying sizes and positioning
Use templates of popular layouts or easily create fully custom layouts with graphical assistance using KDMS Pro software instead of terminal coding

Related Questions and Answers

Q: 1. Is the SD card slot active in this version, unlike the old Solo?

A: The LiveU Solo PRO HDMI Encoder does not list an active SD card slot.

Q: 2. Where is the 4 modem bundle to connect to the encoder?

A: Information about the LiveU Solo Pro Connect 4 modem kit to be used with the LiveU Solo Pro SDI/HDMI 4K Video/Audio Encoder can be found here: https://bhpho.to/4czRfpA.

Q: 3. 1. LiveU Solo Pro support Huawei E8372h-153 4G LTE USB Modems? 2. Can I connect any four external USB modems with a Y cable? I

A: Yes, the LiveU Solo Pro SDI/HDMI 4K Video/Audio Encoder is compatible with the Huawei E8372h-153 4G LTE USB Modems, a full list of compatible modems can be found here: https://tinyurl.com/ybz3zwue. You can also use four USB modems with the Solo Pro using the LiveU Solo Pro Y-Cable, MFR# LU-YCBL-KIT-02.

Q: 4. Does the new LiveU Solo Pro have audio indicators or an audio jack to ensure audio is being passed through?

A: The LiveU Solo PRO HDMI Encoder does have a audio jack for monitoring audio with headphones.

Q: 5. can you use about4 cameras at a time for AV.IO ?

A: This product has a single HDMI Input. You will not be able to connect 4 cameras to this. For multiple cameras you would need a PCIe capture card like B&H # MA400DEHDMI, which has 4 HDMI inputs.https://bhpho.to/2bE2GRV

Q: 6. Is there any one I can speak with about the bridge? A phone number?

A: You can contact B&H Pro Video via B&H Phone: 800.606.6969 or 212.444.6615 International phone number 001.212.444.6615., email: provideo@bhphoto.com.

Q: 7. Does it have PoE?

A: Yes, this supports PoE.

Q: 8. if using for example a Canon 6d mk II which generates a NON clean HDMI out. Will this clean capture card clean up the output once converted a USB signal?

A: This capture device will only capture the feed it is given. It will need a clean feed, it can’t clean up a feed.

Q: 9. Can i send to a broadcast outlet if they have the LiveU decoders? Or, is this just for RTMP or SRT?

A: The LiveU Solo Pro SDI/HDMI 4K Video/Audio Encoder is not compatible with the LiveU Decode Server. It is designed to output via SRT or RTMP.

Q: 10. What is the nominal operating wattage for these camera for PoE operation?

A: For the Marshall Electronics CV630-NDIWm, we would suggest the PoE nominal operating wattage is 24w. (from 12v x 2a.)

Terence	22/09/2024
[Auto-Detect] LiveU Solo Pro video encoder is an outstanding upgrade from the older LiveU Solo! Quick Bootup, 3hr Battery, 4K, 20Mbps, SRT, Larger Display with audio meter, 1/4 20 screw mount. Put to the test for the past four months in various events. I'm very happy with my purchase! 5

Nimereht	22/07/2024
[Yes] I have this switch set up to allow me to switch between a Retina MacBook Pro and my tower gaming PC with Nvidia GTX 1070 graphics card, and it performs the job very well. Previously I had a similar setup using an IOGear DVI+USB KVM switch between MacBook Pro and my older tower PC, with just a DVI-to-DisplayPort adapter on the video cable to the Mac. For the new setup I bought a DisplayPort-to-mini-DisplayPort cable for the Mac (could have used an adapter but the cable was $10 and it's less... lumpy... this way.) I've only been using it for a week or so, but it's working great! Comes with all cables, which seem to be solid quality, and fully bus-powered - small and light but seems well made. The older IOGear DVI+USB2 switch wasn't as expensive as this when it was new, but I guess that's the price I pay for going 4K. I did my usual research on all available DisplayPort + USB switch options before selecting this one, and I'm pretty sure I made the right choice here. If you're trying to drive a 2K or 4K monitor from two DisplayPort-equipped machines and share a mouse and keyboard between them, this is the ticket. 5

Rency	18/07/2024
[Auto-Detect] It is really great small product. 2 computers working great except for the printer.(no place to connect) I am happy and it is highly recommended to everyone to buy that works perfectly. 5

Barney	16/07/2024
[1x HDMI] Used to join to servers/networks for one keyboard & mouse. 5

Eric	27/06/2024
[PoE 802.3af] Simple set up and install. Works well! 5

Steven	23/05/2024
[1x HDMI] the device quality is excelent conectivity is very smooth 5

Sergii	14/05/2024
[Yes] It takes little time to figure it out but once you do, it will be so easy and simple. 5

Min	09/05/2024
[Yes] I use it for 2 pc's, got rid of all the extra cable's, keyboard & mouse. 5

Michael	03/05/2024
[1x HDMI] Preformed exactly as advertised. Completely satisfied. Great product!!! 5

David	25/04/2024
[Yes] I had an older KVM switch installed that shared my monitor, key board and mouse between two computers. It finally gave out. I went to B & H and was very happy to see that I could still purchase this switch new. I came home and plugged it in and everything worked again. Thank You KVM 5